Date: Wed, 4 Oct 2000 11:06:11 +0100 (BST) From: Ian Pallfreeman <ip@karma.freebsd-uk.eu.org> To: freebsd-stable@freebsd.org Subject: Re: More panics (different hardware) Message-ID: <200010041006.e94A6CE56504@karma.freebsd-uk.eu.org> In-Reply-To: <200010011925.MAA45944@pathlink.net> from "Kachun Lee" at Oct 01, 2000 12:25:37 PM
next in thread | previous in thread | raw e-mail | index | archive | help
kachun@pathlink.com (Kachun Lee) wrote: > I upgraded one of our news servers from 4.0-S to 4.1.1 Release. > [...] > Fatal trap 12: page fault while in kernel mode > mp_lock = 00000002; cpuid = 0; lapic.id = 01000000 > fault virtual address = 0x14 > fault code = supervisor read, page not present > instruction pointer = 0x8:0xc0134bb3 > [...] > c01349c4 t ahc_action <----------------------------- Same here; upgraded two news boxes from 4.1-STABLE to 4.1.1-RELEASE and they were both crashing regularly. Here's three panics from the worst culprit: *** #1 *** Fatal trap 12: page fault while in kernel mode fault virtual address = 0x14 fault code = supervisor read, page not present instruction pointer = 0x8:0xc012f69f stack pointer = 0x10:0xc7d6ea18 frame pointer = 0x10:0xc7d6ea80 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 5 (syncer) interrupt mask = trap number = 12 panic: page fault syncing disks... panic: lockmgr: locking against myself *** #2 *** Fatal trap 12: page fault while in kernel mode fault virtual address = 0x14 fault code = supervisor read, page not present instruction pointer = 0x8:0xc012f69f stack pointer = 0x10:0xc7d6ccc8 frame pointer = 0x10:0xc7d6cd30 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 4 (bufdaemon) interrupt mask = bio trap number = 12 panic: page fault syncing disks... 397 397 397 397 397 397 397 397 397 397 397 397 397 397 397 397 397 397 397 397 giving up on 345 buffers *** #3 *** Fatal trap 12: page fault while in kernel mode fault virtual address = 0x14 fault code = supervisor read, page not present^ instruction pointer = 0x8:0xc012f69f stack pointer = 0x10:0xc7d6cc94 frame pointer = 0x10:0xc7d6ccfc code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 4 (bufdaemon) interrupt mask = bio trap number = 12 panic: page fault syncing disks... Spot the pattern: utserv% grep ^instr nakaleen instruction pointer = 0x8:0xc012f69f instruction pointer = 0x8:0xc012f69f instruction pointer = 0x8:0xc012f69f instruction pointer = 0x8:0xc012f69f instruction pointer = 0x8:0xc012f69f instruction pointer = 0x8:0xc012f6a3 The last one is running a debug kernel, but I didn't manage to either get a dump or get into the debugger. :-( nakaleen% nm /kernel.debug | grep ^c012f6a3 nakaleen% nm /kernel.debug | grep ^c012f6a nakaleen% nm /kernel.debug | grep ^c012f6 nakaleen% nm /kernel.debug | grep ^c012f c012f4b4 t ahc_action I've reverted to 4.1-STABLE from around 7th August, which is fine, except for the kvm change between the two. Bah. Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1.1-RELEASE #0: Tue Oct 3 12:54:30 BST 2000 ip@karma:/usr/src/sys/compile/NAKALEEN Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 400911107 Hz CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x651 Stepping = 1 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 134217728 (131072K bytes) avail memory = 127995904 (124996K bytes) Preloaded elf kernel "kernel" at 0xc02b5000. Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x6800-0x683f mem 0xe4000000-0xe40fffff,0xe4100000-0xe4100fff irq 12 at device 11.0 on pci0 fxp0: Ethernet address 00:d0:b7:09:07:3f ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0x6c00-0x6cff mem 0xe4101000-0xe4101fff irq 10 at device 13.0 on pci0 aic7892: Wide Channel A, SCSI Id=7, 32/255 SCBs ahc1: <Adaptec 29160 Ultra160 SCSI adapter> port 0x7000-0x70ff mem 0xe4102000-0xe4102fff irq 11 at device 15.0 on pci0 aic7892: Wide Channel A, SCSI Id=7, 32/255 SCBs fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x0> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ad0: 124MB <st3144AT> [1001/15/17] at ata0-master using PIO0 ad1: 325MB <ST3385A> [768/14/62] at ata0-slave using PIO0 ad2: 405MB <WDC AC2420H> [989/15/56] at ata1-master using PIO3 Waiting 5 seconds for SCSI devices to settle da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE ST150176LW 0002> Fixed Direct Access SCSI-2 device da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit) da0: 47702MB (97693755 512 byte sectors: 255H 63S/T 6081C) da2 at ahc0 bus 0 target 2 lun 0 da2: <SEAGATE ST150176LW 0002> Fixed Direct Access SCSI-2 device da2: 80.000MB/s transfers (40.000MHz, offset 15, 16bit) da2: 47702MB (97693755 512 byte sectors: 255H 63S/T 6081C) da4 at ahc1 bus 0 target 0 lun 0 da4: <SEAGATE ST150176LW 0002> Fixed Direct Access SCSI-2 device da4: 80.000MB/s transfers (40.000MHz, offset 15, 16bit) da4: 47702MB (97693755 512 byte sectors: 255H 63S/T 6081C) da3 at ahc0 bus 0 target 3 lun 0 da3: <SEAGATE ST150176LW 0002> Fixed Direct Access SCSI-2 device da3: 80.000MB/s transfers (40.000MHz, offset 15, 16bit) da3: 47702MB (97693755 512 byte sectors: 255H 63S/T 6081C) da6 at ahc1 bus 0 target 2 lun 0 da6: <SEAGATE ST150176LW 0002> Fixed Direct Access SCSI-2 device da6: 80.000MB/s transfers (40.000MHz, offset 15, 16bit) da6: 47702MB (97693755 512 byte sectors: 255H 63S/T 6081C) da1 at ahc0 bus 0 target 1 lun 0 da1: <SEAGATE ST150176LW 0002> Fixed Direct Access SCSI-2 device da1: 80.000MB/s transfers (40.000MHz, offset 15, 16bit) da1: 47702MB (97693755 512 byte sectors: 255H 63S/T 6081C) da7 at ahc1 bus 0 target 3 lun 0 da7: <SEAGATE ST150176LW 0002> Fixed Direct Access SCSI-2 device da7: 80.000MB/s transfers (40.000MHz, offset 15, 16bit) da7: 47702MB (97693755 512 byte sectors: 255H 63S/T 6081C) da5 at ahc1 bus 0 target 1 lun 0 da5: <SEAGATE ST150176LW 0002> Fixed Direct Access SCSI-2 device da5: 80.000MB/s transfers (40.000MHz, offset 15, 16bit) da5: 47702MB (97693755 512 byte sectors: 255H 63S/T 6081C) Mounting root from ufs:/dev/ad0s1a WARNING: / was not properly dismounted vinum: loaded vinum: reading configuration from /dev/da7s1e vinum: updating configuration from /dev/da4s1e vinum: updating configuration from /dev/da3s1e vinum: updating configuration from /dev/da5s1e vinum: updating configuration from /dev/da6s1e vinum: updating configuration from /dev/da2s1e vinum: updating configuration from /dev/da1s1e vinum: updating configuration from /dev/da0s1e FWIW, Ian. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200010041006.e94A6CE56504>