Date: Sat, 6 Jan 2001 14:28:22 -0800 From: Ben Lovett <blovett@bsdguru.com> To: freebsd-questions@freebsd.org Subject: Determining which SCSI driver to use... Message-ID: <20010106142821.D479@bsdguru.com>
next in thread | raw e-mail | index | archive | help
--EeQfGwPcQSOJBaQU Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hello, Could someone please help me determine which SCSI driver I should use for the following card? It came with a 4x PCMCIA CD-ROM made by Panasonic. The card is manufactured by Panasonic, but seems to use the QLogic chipset (found this out when using this under Linux). Unfortunatly, I can not figure out which device to enable in the kernel config and what I should add to my pccard.conf file.. I have attached a CIS dump for your enjoyment. Thank you for your time! TIA -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Ben Lovett printf("Hello world!); don4r return 0; don4r@bsdguru.com -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- There's no place like ~ --EeQfGwPcQSOJBaQU Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=scsi-dumpcis Configuration data for card in slot 1 Tuple #1, code = 0x1 (Common memory descriptor), length = 3 000: d9 00 ff Common memory device information: Device number 1, type Function specific, WPS = ON Speed = 250nS, Memory block size = 512b, 1 units Tuple #2, code = 0x20 (Manufacturer ID), length = 4 000: 32 00 04 03 PCMCIA ID = 0x32, OEM ID = 0x304 Tuple #3, code = 0x21 (Functional ID), length = 3 000: 08 00 ff SCSI card Tuple #4, code = 0x15 (Version 1 info), length = 18 000: 05 00 4b 4d 45 00 4b 58 4c 43 30 30 32 00 30 30 010: 00 ff Version = 5.0, Manuf = [KME], card vers = [KXLC002] Addit. info = [00] Tuple #5, code = 0x1a (Configuration map), length = 5 000: 01 27 00 04 03 Reg len = 2, config register addr = 0x400, last config = 0x27 Registers: XX------ Tuple #6, code = 0x1b (Configuration entry), length = 13 000: e1 01 19 19 55 5e 16 c0 40 0f 30 ff ff Config index = 0x21(default) Interface byte = 0x1 (I/O) Vcc pwr: Nominal operating supply voltage: 5 x 1V Continuous supply current: 5.5 x 100mA Max current average over 1 second: 1.3 x 100mA Card provides address decode, limited 8/16 Bit I/O I/O address # 1: block length = 0x10 IRQ modes: Level IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Tuple #7, code = 0x1b (Configuration entry), length = 7 000: 24 08 ca 60 30 02 0f Config index = 0x24 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x230 block length = 0x10 Tuple #8, code = 0x1b (Configuration entry), length = 7 000: 25 08 ca 60 50 02 0f Config index = 0x25 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x250 block length = 0x10 Tuple #9, code = 0x1b (Configuration entry), length = 7 000: 26 08 ca 60 70 02 0f Config index = 0x26 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x270 block length = 0x10 Tuple #10, code = 0x1b (Configuration entry), length = 7 000: 27 08 ca 60 90 02 0f Config index = 0x27 Card decodes 10 address lines, limited 8/16 Bit I/O I/O address # 1: block start = 0x290 block length = 0x10 Tuple #11, code = 0x44 (Card init date), length = 4 000: 00 00 58 1f Tuple #12, code = 0x14 (No link), length = 0 Tuple #13, code = 0xff (Terminator), length = 0 2 slots found --EeQfGwPcQSOJBaQU-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010106142821.D479>