Date: Sat, 10 Mar 2001 17:14:08 +0100 From: Wilko Bulte <wkb@freebie.demon.nl> To: Dmitry Sivachenko <dima@chg.ru> Cc: hackers@freebsd.org Subject: Re: Problem with K6-2/500 CPU Message-ID: <20010310171408.A16883@freebie.demon.nl> In-Reply-To: <20010310184300.A83942@netserv1.chg.ru>; from dima@chg.ru on Sat, Mar 10, 2001 at 06:43:00PM %2B0300 References: <20010310184300.A83942@netserv1.chg.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, Mar 10, 2001 at 06:43:00PM +0300, Dmitry Sivachenko wrote: Smells like dodgy hardware, especially memory. You are not overclocking are you? There are no problems with K6-2 & FreeBSD, I ran it on a K6-2 @400 very successfully (now have an Athlon box). Wilko > Hello! > > I use recent FreeBSD-4-STABLE. > When I changed my processor from Intel Pentium 200 MMX to AMD K6-2 500, > I can neither recompile operating system nor compile other programs. > > >From kernel compilation: > > cc -c -O -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -ansi -nostdinc -I- -I. -I../.. -I../../../include -D_KERNEL -include opt_global.h -elf -mpreferred-stack-boundary=2 ../../ufs/ffs/ffs_softdep.c > cc: Internal compiler error: program cc1 got fatal signal 11 > *** Error code 1 > > Stop in /usr/src/sys/compile/CAVIA. > > > > >From compilation of base system: > > cc -O -pipe -DHAVE_CONFIG_H -DLOCALEDIR=\"/usr/share/locale\" -I/usr/src/gnu/usr.bin/texinfo/makeinfo/../../../../contrib/texinfo -I/usr/src/gnu/usr.bin/texinfo/makeinfo/../../../../contrib/texinfo/lib -I/usr/obj/usr/src/i386/usr/include -c /usr/src/gnu/usr.bin/texinfo/makeinfo/../../../../contrib/texinfo/makeinfo/node.c > cc: Internal compiler error: program cc1 got fatal signal 4 > *** Error code 1 > > Stop in /usr/src/gnu/usr.bin/texinfo/makeinfo. > *** Error code 1 > > Stop in /usr/src/gnu/usr.bin/texinfo. > *** Error code 1 > > > What should I do in order to use FreeBSD on K6-2/500 processor? > > Please find my kernel config file attached. > > I'll be glad to provide futher information if necessary. > > Thank you in advance, > Dima. > # > # GENERIC -- Generic kernel configuration file for FreeBSD/i386 > # > # For more information on this file, please read the handbook section on > # Kernel Configuration Files: > # > # http://www.FreeBSD.org/handbook/kernelconfig-config.html > # > # The handbook is also available locally in /usr/share/doc/handbook > # if you've installed the doc distribution, otherwise always see the > # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the > # latest information. > # > # An exhaustive list of options and more detailed explanations of the > # device lines is also present in the ./LINT configuration file. If you are > # in doubt as to the purpose or necessity of a line, check first in LINT. > # > # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.8 2000/07/20 02:51:02 msmith Exp $ > > machine i386 > #cpu I386_CPU > #cpu I486_CPU > cpu I586_CPU > cpu I686_CPU > ident CAVIA > maxusers 32 > > #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols > > options CPU_WT_ALLOC > > options MATH_EMULATE #Support for x87 emulation > options INET #InterNETworking > #options INET6 #IPv6 communications protocols > options FFS #Berkeley Fast Filesystem > options FFS_ROOT #FFS usable as root device [keep this!] > options SOFTUPDATES #Enable FFS soft updates support > options MFS #Memory Filesystem > options MD_ROOT #MD is a potential root device > #options NFS #Network Filesystem > #options NFS_ROOT #NFS usable as root device, NFS required > options MSDOSFS #MSDOS Filesystem > options CD9660 #ISO 9660 Filesystem > options CD9660_ROOT #CD-ROM usable as root, CD9660 required > options PROCFS #Process filesystem > options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] > options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI > options UCONSOLE #Allow users to grab the console > options USERCONFIG #boot -c editor > options VISUAL_USERCONFIG #visual boot -c editor > options KTRACE #ktrace(1) support > options SYSVSHM #SYSV-style shared memory > options SYSVMSG #SYSV-style message queues > options SYSVSEM #SYSV-style semaphores > options P1003_1B #Posix P1003_1B real-time extensions > options _KPOSIX_PRIORITY_SCHEDULING > options ICMP_BANDLIM #Rate limit bad replies > options KBD_INSTALL_CDEV # install a CDEV entry in /dev > > # To make an SMP kernel, the next two are needed > #options SMP # Symmetric MultiProcessor Kernel > #options APIC_IO # Symmetric (APIC) I/O > # Optionally these may need tweaked, (defaults shown): > #options NCPU=2 # number of CPUs > #options NBUS=4 # number of busses > #options NAPIC=1 # number of IO APICs > #options NINTR=24 # number of INTs > > device isa > device eisa > device pci > > # Floppy drives > device fdc0 at isa? port IO_FD1 irq 6 drq 2 > device fd0 at fdc0 drive 0 > device fd1 at fdc0 drive 1 > > # ATA and ATAPI devices > device ata0 at isa? port IO_WD1 irq 14 > device ata1 at isa? port IO_WD2 irq 15 > device ata > device atadisk # ATA disk drives > device atapicd # ATAPI CDROM drives > #device atapifd # ATAPI floppy drives > #device atapist # ATAPI tape drives > options ATA_STATIC_ID #Static device numbering > #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices > > # SCSI Controllers > #device ahb # EISA AHA1742 family > #device ahc # AHA2940 and onboard AIC7xxx devices > #device amd # AMD 53C974 (Teckram DC-390(T)) > #device dpt # DPT Smartcache - See LINT for options! > #device isp # Qlogic family > #device ncr # NCR/Symbios Logic > device sym # NCR/Symbios Logic (newer chipsets) > options SYM_SETUP_LP_PROBE_MAP=0x40 > # Allow ncr to attach legacy NCR devices when > # both sym and ncr are configured > > #device adv0 at isa? > #device adw > #device bt0 at isa? > #device aha0 at isa? > #device aic0 at isa? > > # SCSI peripherals > device scbus # SCSI bus (required) > #device da # Direct Access (disks) > #device sa # Sequential Access (tape etc) > device cd # CD > device pass # Passthrough device (direct SCSI access) > > # RAID controllers > #device ida # Compaq Smart RAID > #device amr # AMI MegaRAID > #device mlx # Mylex DAC960 family > #device twe # 3ware Escalade > > # atkbdc0 controls both the keyboard and the PS/2 mouse > device atkbdc0 at isa? port IO_KBD > device atkbd0 at atkbdc? irq 1 flags 0x1 > device psm0 at atkbdc? irq 12 > > device vga0 at isa? > > # splash screen/screen saver > pseudo-device splash > > # syscons is the default console driver, resembling an SCO console > device sc0 at isa? flags 0x100 > > # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver > #device vt0 at isa? > #options XSERVER # support for X server on a vt console > #options FAT_CURSOR # start with block cursor > # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines > #options PCVT_SCANSET=2 # IBM keyboards are non-std > > # Floating point support - do not disable. > device npx0 at nexus? port IO_NPX irq 13 > > # Power management support (see LINT for more options) > #device apm0 at nexus? disable flags 0x20 # Advanced Power Management > > # PCCARD (PCMCIA) support > #device card > #device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000 > #device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable > > # Serial (COM) ports > device sio0 at isa? port IO_COM1 flags 0x10 irq 4 > device sio1 at isa? port IO_COM2 irq 3 > device sio2 at isa? disable port IO_COM3 irq 5 > device sio3 at isa? disable port IO_COM4 irq 9 > > # Parallel port > device ppc0 at isa? irq 7 > device ppbus # Parallel port bus (required) > device lpt # Printer > device plip # TCP/IP over parallel > device ppi # Parallel port interface device > #device vpo # Requires scbus and da > > > # PCI Ethernet NICs. > #device de # DEC/Intel DC21x4x (``Tulip'') > #device fxp # Intel EtherExpress PRO/100B (82557, 82558) > #device tx # SMC 9432TX (83c170 ``EPIC'') > #device vx # 3Com 3c590, 3c595 (``Vortex'') > #device wx # Intel Gigabit Ethernet Card (``Wiseman'') > > # PCI Ethernet NICs that use the common MII bus controller code. > #device miibus # MII bus support > #device dc # DEC/Intel 21143 and various workalikes > #device rl # RealTek 8129/8139 > #device sf # Adaptec AIC-6915 (``Starfire'') > #device sis # Silicon Integrated Systems SiS 900/SiS 7016 > #device ste # Sundance ST201 (D-Link DFE-550TX) > #device tl # Texas Instruments ThunderLAN > #device vr # VIA Rhine, Rhine II > #device wb # Winbond W89C840F > #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') > > # ISA Ethernet NICs. > #device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 > #device ex > #device ep > # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really > # exists only as a PCMCIA device, so there is no ISA attatement needed > # and resources will always be dynamically assigned by the pccard code. > device wi > # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will > # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP > # mode (the factory default). If you set the switches on your ISA > # card for a manually chosen I/O address and IRQ, you must specify > # those paremeters here. > #device an > # Xircom Ethernet > #device xe > # The probe order of these is presently determined by i386/isa/isa_compat.c. > #device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 > #device fe0 at isa? port 0x300 > #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 > #device lnc0 at isa? port 0x280 irq 10 drq 0 > #device cs0 at isa? port 0x300 > #device sn0 at isa? port 0x300 irq 10 > > # Pseudo devices - the number indicates how many units to allocated. > pseudo-device loop # Network loopback > pseudo-device ether # Ethernet support > pseudo-device sl 1 # Kernel SLIP > pseudo-device ppp 1 # Kernel PPP > pseudo-device tun 4 # Packet tunnel. > pseudo-device pty # Pseudo-ttys (telnet etc) > pseudo-device md # Memory "disks" > #pseudo-device gif 4 # IPv6 and IPv4 tunneling > #pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) > > # The `bpf' pseudo-device enables the Berkeley Packet Filter. > # Be aware of the administrative consequences of enabling this! > pseudo-device bpf #Berkeley packet filter > > # USB support > device uhci # UHCI PCI->USB interface > #device ohci # OHCI PCI->USB interface > device usb # USB Bus (required) > #device ugen # Generic > #device uhid # "Human Interface Devices" > #device ukbd # Keyboard > #device ulpt # Printer > #device umass # Disks/Mass storage - Requires scbus and da > device ums # Mouse > # USB Ethernet, requires mii > #device aue # ADMtek USB ethernet > #device cue # CATC USB ethernet > #device kue # Kawasaki LSI USB ethernet > > pseudo-device vn 2 > #options IPFIREWALL > #options IPFIREWALL_VERBOSE > #options IPDIVERT > > #device pcm0 at isa? port? irq 9 drq 1 flags 0x00 > > options SC_HISTORY_SIZE=1000 > > options _KPOSIX_VERSION=199309L > > options QUOTA > > device snd0 > device mss0 at isa? port 0x530 irq 9 drq 1 > > options MD_NSECT=40000 ---end of quoted text--- -- | / o / / _ Arnhem, The Netherlands email: wilko@freebsd.org |/|/ / / /( (_) Bulte http://www.freebsd.org http://www.nlfug.nl To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010310171408.A16883>