Date: Fri, 23 Mar 2001 09:17:40 +1100 (EST) From: Tony Maher <TMaher@entigen.com> To: stable@freebsd.org Subject: Adaptec 19160 and Data Parity Errors Message-ID: <200103222217.JAA29780@shad.au.int.en-bio.com>
next in thread | raw e-mail | index | archive | help
Hello, I had a 4.2 release with Generic kernel on a Pentium 233MHz MMX, and wanted to add scsi tape drive. Installed an Adaptec 19160 and it detected fine but hung after the 15s waiting for scsi devices to settle message. (there are no devices and card set to auto terminate and also tried termination on) Last messages was Mounting root from ufs:/dev/ads01a Put the card in a 4.3-beta box (Celeron 300A built a couple of days ago) and it worked fine. So upgraded the 4.2R to 4.3-beta. Now it boots up but get constant bold messages ahc: Data Parity Error Detected during address or write data phase PCI Interupt at seqaddr=0x8 <- this also alternates with 0x9o They look like they occur on every access to PCI bus. i.e. they do stop but accesses to disk appear to star the these messages again. There is graphics card and intel 100Mb ethernet card occupying 2 PCI slots. Have tried the adaptec card in both the availble free PCI slots - same deal. Tried BIOS setting plug-n-play of and on. Any ideas? Hardware problems? Bios problems? thanks tonym To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200103222217.JAA29780>