Date: Sun, 15 Apr 2001 16:24:06 -0700 From: Arun Sharma <arun@sharmas.dhs.org> To: Duncan Barclay <dmlb@dmlb.org> Cc: mobile@freebsd.org Subject: Re: HP Omnibook 6000 and if_ray Message-ID: <20010415162406.A21116@sharmas.dhs.org> In-Reply-To: <XFMail.010415201705.dmlb@computer.my.domain>; from dmlb@dmlb.org on Sun, Apr 15, 2001 at 08:17:05PM %2B0100 References: <20010415010656.A19459@sharmas.dhs.org> <XFMail.010415201705.dmlb@computer.my.domain>
next in thread | previous in thread | raw e-mail | index | archive | help
--SLDf9lqlvOQaIe6s
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
On Sun, Apr 15, 2001 at 08:17:05PM +0100, Duncan Barclay wrote:
> Hi
>
> On 15-Apr-01 Arun Sharma wrote:
> > Had a successful install on HP Omnibook 6000. However, I'm unable
> > to get my webgear aviator (2.4 GHz) wireless card to work with
> > freebsd.
>
> Firstly, have you had this card working under 4-stable at all?
>
On a different laptop, yes. But this one is a brand new laptop.
> Can you please send me the output of
> # pccardc dumpcis
> # pccardc rdreg
> # pccardc rdmap
>
See attached.
-Arun
--SLDf9lqlvOQaIe6s
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="laptop.info"
Script started on Mon Sep 4 16:01:58 2000
bash# pccardc dumpcis
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 4
000: 6f 23 2a ff
Common memory device information:
Device number 1, type SRAM, WPS = ON
Speed = 1.5 x 1 us, Memory block size = reserved, 32 units
Device number 2, type No device, WPS = OFF
Speed = No speed, Memory block size = 512b, 1 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 4
000: 6f 23 09 ff
Attribute memory device information:
Device number 1, type SRAM, WPS = ON
Speed = 1.5 x 1 us, Memory block size = reserved, 32 units
Device number 2, type No device, WPS = OFF
Speed = No speed, Memory block size = 512b, 1 units
Tuple #3, code = 0x15 (Version 1 info), length = 54
000: 04 01 57 65 62 47 65 61 72 00 50 43 20 43 61 72
010: 64 20 57 4c 41 4e 20 41 64 61 70 74 65 72 00 56
020: 65 72 73 69 6f 6e 20 34 2e 38 38 20 4a 61 6e 20
030: 31 39 39 39 00 ff
Version = 4.1, Manuf = [WebGear], card vers = [PC Card WLAN Adapter]
Addit. info = [Version 4.88 Jan 1999]
Tuple #4, code = 0x1a (Configuration map), length = 5
000: 01 01 00 0f 0b
Reg len = 2, config register addr = 0xf00, last config = 0x1
Registers: XX-X----
Tuple #5, code = 0x1b (Configuration entry), length = 17
000: c1 81 71 77 55 c5 4b d5 19 3e 56 06 30 b8 ff 08
010: c0
Config index = 0x1(default)
Interface byte = 0x81 (I/O) wait signal supported
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Minimum operating supply voltage: 4 x 1V, ext = 0x4b
Maximum operating supply voltage: 5 x 1V, ext = 0x19
Max current average over 1 second: 3.5 x 100mA
Max current average over 10 ms: 5 x 100mA
Power down supply current: 1 x 100mA
IRQ modes: Level
IRQs: 3 4 5 7 8 9 10 11 12 13 14 15
Memory descriptor 1
blk length = 0xc000
Tuple #6, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #7, code = 0x22 (Functional EXT), length = 2
000: 01 07
Network technology: Wireless
Tuple #8, code = 0x22 (Functional EXT), length = 5
000: 02 80 84 1e 00
Network speed: 2 Mb/sec
Tuple #9, code = 0x22 (Functional EXT), length = 2
000: 03 07
Network media: 2.4 GHz
Tuple #10, code = 0x20 (Manufacturer ID), length = 4
000: a6 01 00 00
PCMCIA ID = 0x1a6, OEM ID = 0x0
Tuple #11, code = 0x14 (No link), length = 0
Tuple #12, code = 0x13 (Link target), length = 3
000: 43 49 53
Tuple #13, code = 0xff (Terminator), length = 0
2 slots found
bash# pccardc rdreg
Registers for slot 0
00: 84 6f 91 60 00 0f 01 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: d1 80 d2 40 2f 7f 00 00 00 00 00 00 00 00 00 00
Registers for slot 1
00: 84 00 10 00 00 0f 00 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bash# pccardc rdmap
Mem 0: flags 0x041 host 0xd4000 card 4000 size 49152 bytes
Mem 1: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 2: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 3: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 4: flags 0x000 host 0x0 card 0000 size 0 bytes
I/O 0: flags 0x000 port 0x 0 size 0 bytes
I/O 1: flags 0x000 port 0x 0 size 0 bytes
Mem 0: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 1: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 2: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 3: flags 0x000 host 0x0 card 0000 size 0 bytes
Mem 4: flags 0x000 host 0x0 card 0000 size 0 bytes
I/O 0: flags 0x000 port 0x 0 size 0 bytes
I/O 1: flags 0x000 port 0x 0 size 0 bytes
bash# exit
exit
Script done on Mon Sep 4 16:02:20 2000
--SLDf9lqlvOQaIe6s--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010415162406.A21116>