Date: Mon, 25 Jun 2001 16:28:56 -0400 From: "Richard E. Hawkins" <dochawk@psu.edu> To: freebsd-questions@FreeBSD.ORG Subject: network with generic, but not custom kernel Message-ID: <200106252028.f5PKSun00529@fac13.ds.psu.edu>
next in thread | raw e-mail | index | archive | help
Do to an insidious drdos bug, I"ve had to reinstall over the last
couple of days. Most things are now working, but I only get
network connection with kernel.GENERIC, and not my own RAPTOR kernel.
This is the same config file that I've been using for weeks, and I
believe a couple of other thinkpad owners are using it.
It's not just the external network that's a problem; netscape and
vmware both have problems, too. vmware reports:
fac13ttyp1:hawk>vm
[3] 496
fac13ttyp1:hawk>Setting TMPDIR=/var/tmp.
XIO: fatal IO error 9 (Bad file descriptor) on X server ":0.0"
after 1794 requests (1793 known processed) with 0 events remaining.
[3] Exit 1 vmware ~/.vmware/vmdeb/linux.cfg -iconic
while netscape comes up, flashes on the screen, and goes away without
any messages.
after booting with -v dmesg, I gett the following (but have no idea
what it means :)
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #2: Mon Jun 25 15:32:13 EDT 2001
toor@fac13.ds.psu.edu:/usr/src/sys/compile/RAPTOR
Calibrating clock(s) ... TSC clock: 846794811 Hz, i8254 clock: 1193089 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon/Celeron (846.86-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536805376 (524224K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x003ed000 - 0x1ffe7fff, 532656128 bytes (130043 pages)
avail memory = 518873088 (506712K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f71e0
bios32: Entry = 0xfd820 (c00fd820) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x19f
pnpbios: Found PnP BIOS data at 0xc00f7210
pnpbios: Entry = f0000:b1ef Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
ACPI: 000f7160
Preloaded elf kernel "kernel" at 0xc03c7000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x7190, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base f4000000, size 26
found-> vendor=0x8086, dev=0x7191, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x104c, dev=0xac1b, revid=0x03
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=4 secondarybus=2
intpin=a, irq=11
map[10]: type 1, range 32, base 50000000, size 12
found-> vendor=0x104c, dev=0xac1b, revid=0x03
class=06-07-00, hdrtype=0x02, mfdev=1
subordinatebus=7 secondarybus=5
intpin=b, irq=11
map[10]: type 1, range 32, base 50100000, size 12
found-> vendor=0x8086, dev=0x1229, revid=0x09
class=02-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base f0120000, size 12
map[14]: type 1, range 32, base 00001800, size 6
map[18]: type 1, range 32, base f0100000, size 17
found-> vendor=0x115d, dev=0x000c, revid=0x00
class=07-00-02, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 00001840, size 3
map[14]: type 1, range 32, base f0121000, size 12
found-> vendor=0x1013, dev=0x6003, revid=0x01
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base f0122000, size 12
map[14]: type 1, range 32, base f0000000, size 20
found-> vendor=0x8086, dev=0x7110, revid=0x02
class=06-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 00001850, size 4
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=11
map[20]: type 1, range 32, base 00001860, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x03
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 1, range 32, base 00001040, size 4
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
found-> vendor=0x1002, dev=0x4c46, revid=0x02
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base f8000000, size 26
map[14]: type 1, range 32, base 00002000, size 8
map[18]: type 1, range 32, base f0200000, size 14
pci1: <PCI bus> on pcib1
pci1: <ATI model 4c46 graphics accelerator> (vendor=0x1002, dev=0x4c46) at 0.0 irq 11
pcic-pci0: <TI PCI-1450 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 2.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
pcic-pci0: Legacy address set to 0x3e0
PCI Config space:
00: ac1b104c 02100007 06070003 00824008
10: 50000000 020000a0 b0040200 00000000
20: 00000000 00000000 00000000 00000000
30: 00000000 00000000 00000000 03c0010b
40: 01301014 000003e1 00000000 00000000
50: 00000000 00000000 00000000 00000000
60: 00000000 00000000 00000000 00000000
70: 00000000 00000000 00000000 00000000
80: 0844d078 00000000 80018080 00001000
90: 406682c0 00000000 00000000 00000000
Cardbus Socket registers:
00: 00000000: 00000000: 30000306: 00000000:
10: 00000000: 00000000: 00000000: 00000000:
ExCa registers:
00: 84 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
pcic-pci1: <TI PCI-1450 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 11 at device 2.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
PCI Config space:
00: ac1b104c 02100007 06070003 00824008
10: 50100000 020000a0 b0070500 00000000
20: 00000000 00000000 00000000 00000000
30: 00000000 00000000 00000000 03c0020b
40: 01301014 000003e1 00000000 00000000
50: 00000000 00000000 00000000 00000000
60: 00000000 00000000 00000000 00000000
70: 00000000 00000000 00000000 00000000
80: 0844d078 00000000 80018080 00001000
90: 406682c0 00000000 00000000 00000000
Cardbus Socket registers:
00: 00000000: 00000000: 30000306: 00000000:
10: 00000000: 00000000: 00000000: 00000000:
ExCa registers:
00: 84 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1800-0x183f mem 0xf0100000-0xf011ffff,0xf0120000-0xf0120fff irq 11 at device 3.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:10:a4:89:ff:db
fxp0: PCI IDs: 8086 1229 8086 2408 0009
fxp0: Chip Type: 0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
pci0: <unknown card> (vendor=0x115d, dev=0x000c) at 3.1 irq 11
csa0: <Crystal Semiconductor CS4614/4622/4624 Audio accelerator/4280 Audio controller> mem 0xf0000000-0xf00fffff,0xf0122000-0xf0122fff irq 11 at device 5.0 on pci0
using shared irq11.
pcm0: <CS461x PCM Audio> on csa0
device_probe_and_attach: pcm0 attach returned 6
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1850-0x185f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1850
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe a=00 b=00
ata0-slave: ATAPI probe a=00 b=00
ata0: mask=03 status0=50 status1=00
ata0-master: ATA probe a=01 b=a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1858
ata1: mask=03 status0=50 status1=01
ata1: mask=03 ostat0=50 ostat2=01
ata1-master: ATAPI probe a=14 b=eb
ata1-slave: ATAPI probe a=00 b=00
ata1: mask=03 status0=00 status1=01
ata1-slave: ATA probe a=04 b=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1860-0x187f irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at device 7.3 on pci0
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd17ff,0xe0000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 91 4f 4f 95 57 4f
c0 1f 00 4f 0d 0e 00 00 07 80 90 83 8f 28 1f 8f
c1 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 91 4f 4f 95 57 4f
c0 1f 00 4f 0d 0e 00 00 07 80 90 83 8f 28 1f 8f
c1 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
stat is 0
stat is 0
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
pcic1: not probed (disabled)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: irq maps: 0x41 0x41 0x41 0x41
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x41 0x41 0x41 0x41
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
ppc0: parallel port found at 0x278
ppc0: using extended I/O port range
ppc0: ECP SPP SPP
ppc0: <Parallel port> at port 0x278-0x27f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/NIBBLE_ID/Extensibility Link
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 4 Plus> PJL,PCL
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
vpo0: can't connect to the drive
imm0: (disconnect) s1=0x20 s2=0x20, s3=0x20
imm0: (connect) s1=0x20 s2=0x20, s3=0x20
imm0: (connect) s1=0x20 s2=0x20, s3=0x20
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fdef3f 0..1021=1022 cylinders, 0..239=240 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: ppp0 attached
new masks: bio 68c840, tty 631892, net 671892
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to deny, logging disabled
bpf: faith0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: lo0 attached
BRIDGE 010131, have 9 interfaces
-- index 1 type 6 phy 0 addrl 6 addr 00.10.a4.89.ff.db
ata0-master: success setting UDMA2 on Intel chip
Creating DISK ad0
ad0: <IBM-DJSA-232/JS8IAD1A> ATA-5 disk at ata0-master
ad0: 30520MB (62506080 sectors), 66144 cyls, 15 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ad0: 30520MB <IBM-DJSA-232> [66144/15/63] at ata0-master UDMA33
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <MATSHITADVD-ROM SR-8175/G228> DVD-ROM drive at ata1 as master
acd0: read 4125KB/s (4125KB/s), 512KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, DVD-RAM, packet
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm data disc loaded, unlocked
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0xb, start 63, end = 10478159, size 10478097 : OK
ad0s2: type 0xa5, start 10478160, end = 31449599, size 20971440 : OK
ad0s3: type 0xa5, start 31449600, end = 52421039, size 20971440 : OK
ad0s4: type 0x16, start 52421040, end = 62506079, size 10085040 : OK
start_init: trying /sbin/init
Linux-ELF exec handler installed
/dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 $
/dev/vmmon: Module vmmon: initialized
bpf: vmnet1 attached
--
Prof. Richard E. Hawkins, Esq. /"\ ASCII ribbon campaign
dochawk@psu.edu Smeal 178 (814) 375-4700 \ / against HTML mail
These opinions will not be those of X and postings
Penn State until it pays my retainer. / \
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200106252028.f5PKSun00529>