Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 05 Jul 2001 19:19:30 -0700
From:      "Greg Smith" <freebsd_mail@yahoo.com>
To:        minter@lunenburg.org
Cc:        freebsd-mobile@freebsd.org
Subject:   Re: 4.3-R lockup with Xircom RealPort REM56 (non-cardbus)
Message-ID:  <200107051919300160.000B5086@smtp.mail.yahoo.com>
In-Reply-To: <20010705213848.F22123-200000@ashburn.skiltech.com>
References:  <20010705213848.F22123-200000@ashburn.skiltech.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Wade,

Given the dmesgs and the vmstat I cannot see anything unusual, only the
following issues:

last two PCI devices are not recognized by FreeBSD:

found->	vendor=0x11c1, dev=0x0449, revid=0x01
	class=07-80-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 1, range 32, base 41200000, size  8
	map[14]: type 1, range 32, base 00003800, size  3
	map[18]: type 1, range 32, base 00003400, size  8

found->	vendor=0x1002, dev=0x4c4d, revid=0x64
	class=03-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 1, range 32, base 40000000, size 24
	map[14]: type 1, range 32, base 00002000, size  8
	map[18]: type 1, range 32, base 41000000, size 12

interrupt activity at rtc, which I haven't seen before:

# vmstat -i 
interrupt      total      rate
ata0 irq14       1781       27
fdc0 irq6           2        0
atkbd0 irq1       264        4
clk irq0         6425      100
rtc irq8         8224      128
Total           16696      260

windows showed Secondary IDE, but FreeBSD can't find it:

ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x38a8
ata1: mask=00 status0=a5 status1=a5
ata1: probe allocation failed

But I can't say that these are problems.  I don't know.

Hopefully someone else will come up with something.


I would be interested in seeing your /etc/rc.conf and /etc/pccard.conf.

Greg

-----Original Message-----

>Attached is the output of boot -v, as well as vmstat -i.
>
>The error messages have already been posted.
>
>--Wade

>> >> -----Original Message-----
>> >>
>> >> >Ok, I booted into Win98 and used Compaq's diagnostics to get my
IRQ
>> >> list.
>> >> >Here's what it shows
>> >> >
>> >> >0 - System Timer
>> >> >1 - Keyboard
>> >> >2 - "Programmable interrupt controller"
>> >> >3 - Infared port
>> >> >4 - COM1
>> >> >5 - Meastro DOS Games/FM devices
>> >> >6 - Floppy controller
>> >> >7 - Printer port
>> >> >8 - CMOS/RTC
>> >> >9 - SCI IRQ used by ACPI bus
>> >> >10 - None
>> >> >11 - A ton of stuff
>> >> >12 - Compaq EasyPoint IV
>> >> >13 - Numeric data processor
>> >> >14 - Primary IDE
>> >> >15 - Secondary IDE



_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200107051919300160.000B5086>