Date: Sat, 14 Jul 2001 09:52:32 +0900 From: FUJITA Kazutoshi <fujita@soum.co.jp> To: freebsd-smp@FreeBSD.ORG Subject: SMP kernel hungs up on ASUS CUV4X-D Message-ID: <20010714095232C.fujita@soum.co.jp>
next in thread | raw e-mail | index | archive | help
----Next_Part(Sat_Jul_14_09:51:44_2001_809)-- Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi, smp people. I've got ASUS CUVX-D motherboard (VIA 694XDP Chipset) which has dual Socket 370. I tried 4.3-STABLE(cvsuped Jul 13) SMP kernel, but often hungs up. It does not accept keyboard, mouse and network input or connection. I have no messages in log(such as /var/log/messages). I also tried with 5.0-CURRENT, but the result was same. Any suggestions ? Regards, ----Next_Part(Sat_Jul_14_09:51:44_2001_809)-- Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Description: mptable -dmesg Content-Disposition: attachment; filename="mptable.dmesg" =============================================================================== MPTable, version 2.0.15 ------------------------------------------------------------------------------- MP Floating Pointer Structure: location: BIOS physical address: 0x000f54d0 signature: '_MP_' length: 16 bytes version: 1.4 checksum: 0x7d mode: Virtual Wire ------------------------------------------------------------------------------- MP Config Table Header: physical address: 0x000f50c4 signature: 'PCMP' base table length: 276 version: 1.4 checksum: 0x8e OEM ID: 'OEM00000' Product ID: 'PROD00000000' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 26 local APIC address: 0xfee00000 extended table length: 124 extended table checksum: 167 ------------------------------------------------------------------------------- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 3 0x11 BSP, usable 6 8 6 0x387fbff 0 0x11 AP, usable 6 8 6 0x387fbff -- Bus: Bus ID Type 0 PCI 1 PCI 2 ISA -- I/O APICs: APIC ID Version State Address 2 0x11 usable 0xfec00000 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT conforms conforms 2 0 2 0 INT conforms conforms 2 1 2 1 INT conforms conforms 2 0 2 2 INT conforms conforms 2 3 2 3 INT conforms conforms 2 4 2 4 INT conforms conforms 2 6 2 6 INT conforms conforms 2 7 2 7 INT conforms conforms 2 8 2 8 INT conforms conforms 2 12 2 12 INT conforms conforms 2 14 2 14 INT conforms conforms 2 15 2 15 INT active-lo level 1 0:A 2 16 INT active-lo level 2 0 2 0 INT active-lo level 0 4:D 2 18 INT active-lo level 0 9:A 2 19 INT active-lo level 0 10:A 2 18 INT active-lo level 0 11:A 2 17 INT active-lo level 0 13:A 2 19 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT active-hi edge 2 0 255 0 NMI active-hi edge 2 0 255 1 ------------------------------------------------------------------------------- MP Config Extended Table Entries: -- System Address Space bus ID: 0 address type: I/O address address base: 0x0 address range: 0x10000 -- System Address Space bus ID: 0 address type: memory address address base: 0x20000000 address range: 0xcfec0000 -- System Address Space bus ID: 0 address type: prefetch address address base: 0xefec0000 address range: 0xf8140000 -- System Address Space bus ID: 0 address type: memory address address base: 0xe8000000 address range: 0x18000000 -- System Address Space bus ID: 0 address type: memory address address base: 0xa0000 address range: 0x20000 -- Bus Heirarchy bus ID: 2 bus info: 0x01 parent bus ID: 0 -- Compatibility Bus Address bus ID: 0 address modifier: add predefined range: 0x00000000 -- Compatibility Bus Address bus ID: 0 address modifier: add predefined range: 0x00000001 ------------------------------------------------------------------------------- dmesg output: Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.3-STABLE #0: Fri Jul 13 18:37:05 JST 2001 fujita@vanilla.soum.co.jp:/usr/obj/usr/src/sys/VANILLA Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (1004.52-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory = 536870912 (524288K bytes) sio0: gdb debugging port avail memory = 518193152 (506048K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 3, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00178011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc046a000. ccd0-3: Concatenated disk drivers netsmb_dev: loaded Pentium Pro MTRR support enabled md0: Malloc disk apm0: <APM BIOS> on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard IOAPIC #0 intpin 18 -> irq 2 IOAPIC #0 intpin 19 -> irq 5 IOAPIC #0 intpin 17 -> irq 9 pci0: <PCI bus> on pcib0 pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0 IOAPIC #0 intpin 16 -> irq 10 pci1: <PCI bus> on pcib2 pci1: <NVidia model 0110 graphics accelerator> at 0.0 irq 10 isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA100 controller> port 0xd800-0xd80f at device 4.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 2 at device 4.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 2 at device 4.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered sym0: <875> port 0xb800-0xb8ff mem 0xed000000-0xed000fff,0xed800000-0xed8000ff irq 5 at device 9.0 on pci0 sym0: Symbios NVRAM, ID 7, Fast-20, SE, parity checking pcm0: <Creative EMU10K1> port 0xb400-0xb41f irq 2 at device 10.0 on pci0 vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xa800-0xa8ff mem 0xec800000-0xec8000ff irq 9 at device 11.0 on pci0 vr0: Ethernet address: 00:90:99:22:e0:14 miibus0: <MII bus> on vr0 acphy0: <AC101 10/100 media interface> on miibus0 acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xa400-0xa47f mem 0xec000000-0xec00007f irq 5 at device 13.0 on pci0 xl0: Ethernet address: 00:04:76:6e:1f:81 miibus1: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus1 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib1: <Host to PCI bridge> on motherboard pci2: <PCI bus> on pcib1 orm0: <Option ROM> at iomem 0xc0000-0xcb7ff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x80 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 flags 0x10 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pcf0: can't reserve irq, polled mode. pcf0: <PCF8584 I2C bus controller> at port 0x320-0x321 irq 5 on isa0 iicbus0: <Philips I2C bus> on pcf0 addr 0xaa iicsmb0: <I2C to SMB bridge> on iicbus0 smbus0: <System Management Bus> on iicsmb0 smb0: <SMBus general purpose I/O> on smbus0 iic0: <I2C general purpose I/O> on iicbus0 APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 IPsec: Initialized Security Association Processing. SMP: AP CPU #1 Launched! ad0: 39266MB <IC35L040AVER07-0> [79780/16/63] at ata0-master UDMA100 ata1-master: DMA limited to UDMA33, non-ATA66 compliant cable ad2: 39266MB <IC35L040AVER07-0> [79780/16/63] at ata1-master UDMA33 acd0: CDROM <ATAPI CDROM> at ata1-slave using PIO4 Waiting 15 seconds for SCSI devices to settle Mounting root from ufs:/dev/ad0s4a =============================================================================== ----Next_Part(Sat_Jul_14_09:51:44_2001_809)---- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010714095232C.fujita>