Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 17 Aug 2001 13:54:15 -0400
From:      Michael Lucas <mwlucas@blackhelicopters.org>
To:        Warner Losh <imp@harmony.village.org>
Cc:        FreeBSD-Mobile@FreeBSD.ORG
Subject:   Re: HEADS UP: pcic pci attachments merged from current
Message-ID:  <20010817135415.A56170@blackhelicopters.org>
In-Reply-To: <200108171558.f7HFwGW42332@harmony.village.org>; from imp@harmony.village.org on Fri, Aug 17, 2001 at 09:58:16AM -0600
References:  <20010816130412.A6381@laptop.lambertfam.org> <20010815195629.A1190@laptop.lambertfam.org> <200108160646.f7G6kqW30164@harmony.village.org> <20010816130412.A6381@laptop.lambertfam.org> <200108161810.f7GIAmW34443@harmony.village.org> <20010816193117.A591@laptop.lambertfam.org> <20010816221255.A53398@blackhelicopters.org> <200108170412.f7H4CeW37753@harmony.village.org> <20010817081737.A54785@blackhelicopters.org> <200108171558.f7HFwGW42332@harmony.village.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Aug 17, 2001 at 09:58:16AM -0600, Warner Losh wrote:
> You can try http://people.freebsd.org/~imp/no-hang.diff.4 with the
> instructions I posted earlier (set hw.pci.ignore_pcibios=1 at the boot 
> loader prompt).

Well, it boots now, but pccardd doesn't detect or attach anything.
Here's a dmesg:

Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (646.83-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 335413248 (327552K bytes)
avail memory = 322875392 (315308K bytes)
Preloaded elf kernel "kernel" at 0xc033b000.
Pentium Pro MTRR support enabled
md0: Malloc disk
PCI code ignoring PCIbios entry
Using $PIR table, 6 entries at 0xc00f0460
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <S3 model 8c12 graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfff0-0xffff at device 5.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xff80-0xff9f irq 11 at device 5.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x4070-0x407f at device 5.3 on pci0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xff40-0xff7f mem 0xeffc0000-0xeffdffff,0xeffff000-0xefffffff irq 11 at device 8.0 on pci0
fxp0: Ethernet address 00:10:a4:10:28:ae
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x115d, dev=0x00d4) at 8.1 irq 11
pcib0: intreq
pci_cfgintr_unique: hard-routed to irq 11
pci_cfgintr: 0:11 INTA routed to irq 11
pcic0: <Toshiba ToPIC100 PCI-CardBus Bridge> irq 11 at device 11.0 on pci0
pcic0: PCI Memory allocated: 0x44000000
pccard0: <PC Card bus (classic)> on pcic0
pcib0: intreq
pci_cfgintr_unique: hard-routed to irq 11
pci_cfgintr: ROUTE_INTERRUPT failed
pcic1: <Toshiba ToPIC100 PCI-CardBus Bridge> at device 11.1 on pci0
pcic1: PCI Memory allocated: 0x44001000
pcib0: intreq
pci_cfgintr_unique: hard-routed to irq 11
pci_cfgintr: ROUTE_INTERRUPT failed
pcic1: Failed to allocate managment irq
device_probe_and_attach: pcic1 attach returned 5
pcm0: <Yamaha DS-1E (YMF754)> port 0xfebc-0xfebf,0xfec0-0xfeff mem 0xefdf0000-0xefdf7fff irq 11 at device 12.0 on pci0
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcffff,0xe4000-0xe7fff,0xe8000-0xebfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 5729MB <TOSHIBA MK6015MAP> [12416/15/63] at ata0-master UDMA33
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a





-- 
Michael Lucas
mwlucas@blackhelicopters.org
http://www.blackhelicopters.org/~mwlucas/
Big Scary Daemons: http://www.oreillynet.com/pub/q/Big_Scary_Daemons

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010817135415.A56170>