Date: Mon, 17 Sep 2001 02:03:21 +0900 (JST) From: Mitsuru IWASAKI <iwasaki@jp.FreeBSD.org> To: yokota@zodiac.mech.utsunomiya-u.ac.jp Cc: current@freebsd.org, acpi-jp@jp.freebsd.org Subject: Re: ThinkPad, ACPI, and PS/2 mouse Message-ID: <20010917.020321.74756726.iwasaki@jp.FreeBSD.org> In-Reply-To: <20010915.234817.92590934.iwasaki@jp.FreeBSD.org> References: <200109110336.MAA13723@zodiac.mech.utsunomiya-u.ac.jp> <20010915.234817.92590934.iwasaki@jp.FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
----Next_Part(Mon_Sep_17_02:03:21_2001_142)-- Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi, I've just noticed strange behavior of psm probing (w/ and w/o acpi). > > It now appears that some IBM ThinkPad models assign a distinct PnP ID > > to the PS/2 mouse port. > > > > If you have ThinkPad and its pointing device is not recognized when > > ACPI is loaded in the latest -current system, please do the following > > > > 1. Disable ACPI and boot > > unset acpi_load > > boot -v > > 2. Send the entire dmesg output to me. Don't forget to tell me > > the model name of your ThinkPad too. > > > > ThinkPad models currently known to have this behavior: > > > > model PnP ID for the PS/2 mouse port > > ---------------------------------------------------- > > ThinkPad 570E IBM3780 > > I also have a ThinkPad i1620 (PS/2 mouse PnP ID = 0x80374d24) here and > now that the mouse is recognized correctly with ACPI module by your > last commit. This is not a ThinkPad, but FIVA 206VL (PS/2 mouse PnP ID = 0x130fd041; normal one), the psm is no longer recognized if USB is not compiled (or USB module is not loaded at loader). Here is difference between dmesgs of kernel w/o and w/ usb module. --- dmesg-nousb Mon Sep 17 01:24:17 2001 +++ dmesg-usb Mon Sep 17 01:26:47 2001 @@ -3,7 +3,7 @@ The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #52: Mon Sep 17 01:16:21 JST 2001 root@fivavl:/usr/obj/usr/CURRENT/src/sys/FIVA -Calibrating clock(s) ... TSC clock: 597277464 Hz, i8254 clock: 1193158 Hz +Calibrating clock(s) ... TSC clock: 597277748 Hz, i8254 clock: 1193162 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method @@ -16,16 +16,17 @@ real memory = 251592704 (245696K bytes) Physical memory chunk(s): 0x00001000 - 0x0009afff, 630784 bytes (154 pages) -0x0049f000 - 0x0efe7fff, 246714368 bytes (60233 pages) -avail memory = 240271360 (234640K bytes) +0x004be000 - 0x0efe7fff, 246587392 bytes (60202 pages) +avail memory = 240144384 (234516K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f82a0 bios32: Entry = 0xfd770 (c00fd770) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd770+0x11e pnpbios: Found PnP BIOS data at 0xc00f82f0 pnpbios: Entry = f0000:a965 Rev = 1.0 Other BIOS signatures found: -Preloaded elf kernel "/boot/kernel/kernel" at 0xc0478000. -Preloaded elf module "/boot/kernel/logo_saver.ko" at 0xc04780b4. +Preloaded elf kernel "/boot/kernel/kernel" at 0xc0497000. +Preloaded elf module "/boot/kernel/logo_saver.ko" at 0xc04970b4. +Preloaded elf module "/boot/kernel/usb.ko" at 0xc0497164. null: <null device, zero device> mem: <memory & I/O> random: <entropy source> @@ -117,11 +118,11 @@ pcm0: ac97 codec id 0x41445348 (Analog Devices AD1881A) pcm0: ac97 codec features headphone, 6 bit master volume, Analog Devices Phat Stereo pcm0: ac97 primary codec extended features variable rate PCM -pcm: setmap 50e000, 1000; 0xc15fa000 -> 50e000 -pcm: setmap 4f1000, 1000; 0xc15fd000 -> 4f1000 -pcm: setmap 4f3000, 1000; 0xc15ff000 -> 4f3000 -pcm: setmap 4d5000, 1000; 0xc1601000 -> 4d5000 -pcm: setmap 4d7000, 1000; 0xc1603000 -> 4d7000 +pcm: setmap 514000, 1000; 0xc1600000 -> 514000 +pcm: setmap 4f7000, 1000; 0xc1603000 -> 4f7000 +pcm: setmap 4f9000, 1000; 0xc1605000 -> 4f9000 +pcm: setmap 51b000, 1000; 0xc1607000 -> 51b000 +pcm: setmap 51d000, 1000; 0xc1609000 -> 51d000 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 pci0: <display, VGA> at device 9.0 (no driver attached) @@ -285,7 +286,13 @@ ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1808 ata1: at 0x170 irq 15 on atapci0 pci0: <bridge, PCI-unknown> at device 17.0 (no driver attached) -pci0: <serial bus, USB> at device 20.0 (no driver attached) +ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xd0000-0xd0fff irq 11 at device 20.0 on pci0 +usb0: OHCI version 1.0, legacy support +usb0: SMM does not respond, resetting +usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 +usb0: USB revision 1.0 +uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 +uhub0: 2 ports with 2 removable, self powered ex_isa_identify() ata-: ata0 already exists, using ata2 instead ata-: ata1 already exists, using ata3 instead @@ -370,7 +377,10 @@ kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 atkbd1: unable to allocate IRQ psm0: current command byte:0047 -psm0: the aux port is not functioning (-1). +psm0: <PS/2 Mouse> irq 12 on atkbdc0 +psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons +psm0: config:00000000, flags:00000000, packet size:3 +psm0: syncmask:c0, syncbits:00 bt0 failed to probe on isa0 cs0 failed to probe at port 0x300 on isa0 ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0 @@ -430,10 +440,8 @@ unknown: <PNP0800> failed to probe at port 0x61 on isa0 unknown: <PNP0c02> can't assign resources unknown: <PNP0c02> at iomem 0xd8000-0xdbfff on isa0 -psmcpnp0: <PS/2 mouse port> at irq 12 on isa0 -atkbd1: unable to allocate IRQ -psm0: current command byte:0047 -psm0: the aux port is not functioning (-1). +unknown: <PNP0f13> can't assign resources +unknown: <PNP0f13> at irq 12 on isa0 fdc1: cannot reserve I/O port range (1 ports) unknown: <PC standard floppy disk controller> failed to probe on isa0 BIOS Geometries: @@ -441,9 +449,9 @@ 0 accounted for Device configuration finished. splash: image decoder found: logo_saver +bpf: ppp0 attached bpf: faith0 attached bpf: lo0 attached -bpf: ppp0 attached ad0: success setting UDMA4 on Acer chip Creating DISK ad0 ad0: <IC25N030ATDA04-0/DA4OA70A> ATA-5 disk at ata0-master I tried to load acpi module too, but it seems acpi doesn't affect psm probing on this machine. In summary; with USB without USB ---------------+---------------+------------- with ACPI OK NG without ACPI OK NG I enclosed dmesg -v output of kernel w/o usb and acpi. Thanks ----Next_Part(Mon_Sep_17_02:03:21_2001_142)-- Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Description: dmesg-nousb Content-Disposition: inline; filename=dmesg-nousb Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #52: Mon Sep 17 01:16:21 JST 2001 root@fivavl:/usr/obj/usr/CURRENT/src/sys/FIVA Calibrating clock(s) ... TSC clock: 597277464 Hz, i8254 clock: 1193158 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Transmeta(tm) Crusoe(tm) Processor TM5600 (597.30-MHz 586-class CPU) Origin = "GenuineTMx86" Id = 0x543 Processor revision 1.3.1.2 Code Morphing Software revision 4.1.7-7-154 20010606 19:11 official release 18.0.1-4.1.7#3 LongRun mode: 1 <600MHz 1600mV 100%> real memory = 251592704 (245696K bytes) Physical memory chunk(s): 0x00001000 - 0x0009afff, 630784 bytes (154 pages) 0x0049f000 - 0x0efe7fff, 246714368 bytes (60233 pages) avail memory = 240271360 (234640K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f82a0 bios32: Entry = 0xfd770 (c00fd770) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd770+0x11e pnpbios: Found PnP BIOS data at 0xc00f82f0 pnpbios: Entry = f0000:a965 Rev = 1.0 Other BIOS signatures found: Preloaded elf kernel "/boot/kernel/kernel" at 0xc0478000. Preloaded elf module "/boot/kernel/logo_saver.ko" at 0xc04780b4. null: <null device, zero device> mem: <memory & I/O> random: <entropy source> Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x80007804 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=03951279) Using $PIR table, 10 entries at 0xc00fdf20 apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pci0: physical bus=0 map[10]: type 1, range 32, base fc100000, size 20, enabled found-> vendor=0x1279, dev=0x0395, revid=0x00 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 found-> vendor=0x1279, dev=0x0396, revid=0x00 bus=0, slot=0, func=1 class=05-00-00, hdrtype=0x00, mfdev=1 found-> vendor=0x1279, dev=0x0397, revid=0x00 bus=0, slot=0, func=2 class=05-00-00, hdrtype=0x00, mfdev=1 map[10]: type 4, range 32, base 00001000, size 8, enabled map[14]: type 1, range 32, base fc004000, size 12, enabled found-> vendor=0x10b9, dev=0x5451, revid=0x01 bus=0, slot=4, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x10b9, dev=0x1533, revid=0x00 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=0 powerspec 1 supports D0 D3 current D0 map[10]: type 1, range 32, base fd000000, size 24, enabled found-> vendor=0x126f, dev=0x0712, revid=0xa0 bus=0, slot=9, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=9 powerspec 1 supports D0 D1 D2 D3 current D0 found-> vendor=0x104c, dev=0xac51, revid=0x00 bus=0, slot=10, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 intpin=a, irq=5 powerspec 1 supports D0 D1 D2 D3 current D0 found-> vendor=0x104c, dev=0xac51, revid=0x00 bus=0, slot=10, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 intpin=b, irq=4 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fc006000, size 11, enabled map[14]: type 1, range 32, base fc000000, size 14, enabled found-> vendor=0x104c, dev=0x8020, revid=0x00 bus=0, slot=11, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 intpin=a, irq=10 powerspec 1 supports D0 D2 D3 current D0 map[10]: type 4, range 32, base 00001400, size 8, enabled map[14]: type 1, range 32, base fc006800, size 8, enabled found-> vendor=0x10ec, dev=0x8139, revid=0x10 bus=0, slot=12, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 000001f0, size 4, enabled map[14]: type 4, range 32, base 000003f4, size 2, enabled map[18]: type 4, range 32, base 00000000, size 3, enabled map[1c]: type 4, range 32, base 00000000, size 2, enabled map[20]: type 4, range 32, base 00001800, size 4, enabled found-> vendor=0x10b9, dev=0x5229, revid=0xc3 bus=0, slot=15, func=0 class=01-01-a4, hdrtype=0x00, mfdev=0 intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 found-> vendor=0x10b9, dev=0x7101, revid=0x00 bus=0, slot=17, func=0 class=06-80-00, hdrtype=0x00, mfdev=0 map[10]: type 1, range 32, base 000d0000, size 12, enabled found-> vendor=0x10b9, dev=0x5237, revid=0x03 bus=0, slot=20, func=0 class=0c-03-10, hdrtype=0x00, mfdev=0 intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 pci0: <PCI bus> on pcib0 pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pcm0: <Acer Labs M5451> port 0x1000-0x10ff mem 0xfc004000-0xfc004fff irq 10 at device 4.0 on pci0 pcm0: ac97 codec id 0x41445348 (Analog Devices AD1881A) pcm0: ac97 codec features headphone, 6 bit master volume, Analog Devices Phat Stereo pcm0: ac97 primary codec extended features variable rate PCM pcm: setmap 50e000, 1000; 0xc15fa000 -> 50e000 pcm: setmap 4f1000, 1000; 0xc15fd000 -> 4f1000 pcm: setmap 4f3000, 1000; 0xc15ff000 -> 4f3000 pcm: setmap 4d5000, 1000; 0xc1601000 -> 4d5000 pcm: setmap 4d7000, 1000; 0xc1603000 -> 4d7000 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 pci0: <display, VGA> at device 9.0 (no driver attached) pcic0: <TI PCI-1420 PCI-CardBus Bridge> irq 5 at device 10.0 on pci0 pcic0: PCI Memory allocated: 0x44000000 pcic0: Polling mode pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq] pcic0: PCI Configuration space: 0x00: 0xac51104c 0x04: 0x02100007 0x08: 0x06070000 0x0c: 0x00824008 0x10: 0x44000000 0x14: 0x020000a0 0x18: 0x00000000 0x1c: 0x00000000 0x20: 0x00000000 0x24: 0x00000000 0x28: 0x00000000 0x2c: 0x00000000 0x30: 0x00000000 0x34: 0x00000000 0x38: 0x00000000 0x3c: 0x07e00105 0x40: 0x00000000 0x44: 0x00000001 0x48: 0x00000000 0x4c: 0x00000000 0x50: 0x00000000 0x54: 0x00000000 0x58: 0x00000000 0x5c: 0x00000000 0x60: 0x00000000 0x64: 0x00000000 0x68: 0x00000000 0x6c: 0x00000000 0x70: 0x00000000 0x74: 0x00000000 0x78: 0x00000000 0x7c: 0x00000000 0x80: 0x48449061 0x84: 0x00000000 0x88: 0x00000000 0x8c: 0x012c1222 0x90: 0x6066a2c0 0x94: 0x00000000 0x98: 0x00000000 0x9c: 0x00000000 0xa0: 0xfe110001 0xa4: 0x00c00000 0xa8: 0x00000000 0xac: 0x0000001f 0xb0: 0x09000000 0xb4: 0x00000000 0xb8: 0x00000000 0xbc: 0x00000000 0xc0: 0x00000000 0xc4: 0x00000000 0xc8: 0x00000000 0xcc: 0x00000000 0xd0: 0x00000000 0xd4: 0x00000000 0xd8: 0x00000000 0xdc: 0x00000000 0xe0: 0x00000000 0xe4: 0x00000000 0xe8: 0x00000000 0xec: 0x00000000 0xf0: 0x00000000 0xf4: 0x00000000 0xf8: 0x00000000 0xfc: 0x00000000 pccard0: <PC Card bus (classic)> on pcic0 pcic1: <TI PCI-1420 PCI-CardBus Bridge> irq 4 at device 10.1 on pci0 pcic1: PCI Memory allocated: 0x44001000 pcic1: Polling mode pcic1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq] pcic1: PCI Configuration space: 0x00: 0xac51104c 0x04: 0x02100007 0x08: 0x06070000 0x0c: 0x00824008 0x10: 0x44001000 0x14: 0x020000a0 0x18: 0x00000000 0x1c: 0x00000000 0x20: 0x00000000 0x24: 0x00000000 0x28: 0x00000000 0x2c: 0x00000000 0x30: 0x00000000 0x34: 0x00000000 0x38: 0x00000000 0x3c: 0x07e00204 0x40: 0x00000000 0x44: 0x00000001 0x48: 0x00000000 0x4c: 0x00000000 0x50: 0x00000000 0x54: 0x00000000 0x58: 0x00000000 0x5c: 0x00000000 0x60: 0x00000000 0x64: 0x00000000 0x68: 0x00000000 0x6c: 0x00000000 0x70: 0x00000000 0x74: 0x00000000 0x78: 0x00000000 0x7c: 0x00000000 0x80: 0x48449061 0x84: 0x00000000 0x88: 0x00000000 0x8c: 0x012c1222 0x90: 0x6066a2c0 0x94: 0x00000000 0x98: 0x00000000 0x9c: 0x00000000 0xa0: 0xfe110001 0xa4: 0x00c00000 0xa8: 0x00000800 0xac: 0x0000001f 0xb0: 0x09000000 0xb4: 0x00000000 0xb8: 0x00000000 0xbc: 0x00000000 0xc0: 0x00000000 0xc4: 0x00000000 0xc8: 0x00000000 0xcc: 0x00000000 0xd0: 0x00000000 0xd4: 0x00000000 0xd8: 0x00000000 0xdc: 0x00000000 0xe0: 0x00000000 0xe4: 0x00000000 0xe8: 0x00000000 0xec: 0x00000000 0xf0: 0x00000000 0xf4: 0x00000000 0xf8: 0x00000000 0xfc: 0x00000000 pccard1: <PC Card bus (classic)> on pcic1 pci0: <serial bus, FireWire> at device 11.0 (no driver attached) rl0: <RealTek 8139 10/100BaseTX> port 0x1400-0x14ff mem 0xfc006800-0xfc0068ff irq 11 at device 12.0 on pci0 rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode rl0: Ethernet address: 08:00:74:50:46:2a miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: rl0 attached atapci0: <AcerLabs Aladdin ATA33 controller> port 0x1800-0x180f,0-0x3,0-0x7,0x3f4-0x3f7,0x1f0-0x1ff at device 15.0 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1800 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI probe 00 00 ata0-slave: ATAPI probe 00 00 ata0: mask=03 stat0=50 stat1=00 ata0-master: ATA probe 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1808 ata1: at 0x170 irq 15 on atapci0 pci0: <bridge, PCI-unknown> at device 17.0 (no driver attached) pci0: <serial bus, USB> at device 20.0 (no driver attached) ex_isa_identify() ata-: ata0 already exists, using ata2 instead ata-: ata1 already exists, using ata3 instead pcic-: pcic0 already exists, using pcic2 instead pcic-: pcic1 already exists, using pcic3 instead Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 pnpbios: 16 devices, largest 90 bytes PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1 pnpbios: handle 0 device ID PNP0a03 (030ad041) PNP0c01: adding memory range 0-0x9bfff, size=0x9c000, align=0x1 PNP0c01: adding memory range 0xe0000-0xfffff, size=0x20000, align=0x1 PNP0c01: adding memory range 0xde000-0xdffff, size=0x2000, align=0x1 PNP0c01: adding fixed memory32 range 0x100000-0xf0ffbff, size=0xefffc00 pnpbios: handle 1 device ID PNP0c01 (010cd041) PNP0c02: adding irq mask 0x200 PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1 PNP0c02: adding io range 0xb1-0xb1, size=0x1, align=0x1 PNP0c02: adding io range 0x40b-0x40b, size=0x1, align=0x1 PNP0c02: adding io range 0x480-0x48f, size=0x10, align=0x1 PNP0c02: adding io range 0x4d6-0x4d6, size=0x1, align=0x1 PNP0c02: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000 pnpbios: handle 2 device ID PNP0c02 (020cd041) PNP0200: adding io range 0-0xf, size=0x10, align=0x1 PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 PNP0200: adding dma mask 0x10 pnpbios: handle 3 device ID PNP0200 (0002d041) PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1 PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1 PNP0000: adding irq mask 0x4 pnpbios: handle 4 device ID PNP0000 (0000d041) PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 PNP0100: adding irq mask 0x1 pnpbios: handle 5 device ID PNP0100 (0001d041) PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 PNP0b00: adding irq mask 0x100 pnpbios: handle 6 device ID PNP0b00 (000bd041) PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 PNP0303: adding irq mask 0x2 pnpbios: handle 7 device ID PNP0303 (0303d041) PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 PNP0c04: adding irq mask 0x2000 pnpbios: handle 8 device ID PNP0c04 (040cd041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 9 device ID PNP0800 (0008d041) PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0c02: adding io range 0x92-0x92, size=0x1, align=0x1 PNP0c02: adding io range 0x8000-0x803f, size=0x40, align=0x1 PNP0c02: adding io range 0x8040-0x804f, size=0x10, align=0x1 pnpbios: handle 10 device ID PNP0c02 (020cd041) PNP0c02: adding memory32 range 0x9c000-0x9ffff, size=0x4000, align=0x4000 pnpbios: handle 11 device ID PNP0c02 (020cd041) PNP0c02: adding memory32 range 0xd8000-0xdbfff, size=0x4000, align=0x4000 pnpbios: handle 12 device ID PNP0c02 (020cd041) pnpbios: handle 13 device ID PNP0c02 (020cd041) PNP0f13: adding irq mask 0x1000 pnpbios: handle 14 device ID PNP0f13 (130fd041) pnpbios: handle 15 device ID PNP0700 (0007d041) sc-: sc0 already exists, using sc1 instead vga-: vga0 already exists, using vga1 instead isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xd8000-0xdbfff on isa0 adv0 failed to probe on isa0 aha0 failed to probe on isa0 aic0 failed to probe on isa0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3 failed to probe at port 0x170 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 atkbd1: unable to allocate IRQ psm0: current command byte:0047 psm0: the aux port is not functioning (-1). bt0 failed to probe on isa0 cs0 failed to probe at port 0x300 on isa0 ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0 fdc0: direction bit not set fdc0: cmd 3 failed at out byte 1 of 3 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0 failed to probe at port 0x300-0x31f on isa0 ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0 le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0 lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0 pcic2 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic3: not probed (disabled) pmtimer0 on isa0 ppc0 failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: irq maps: 0x1 0x1 0x1 0x1 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0 failed to probe at port 0x300 irq 10 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 53 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 53 81 bf 1f 00 4f 0e 0f 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 53 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0 failed to probe on isa0 sc1: no video adapter found. sc1: <System console> failed to probe on isa0 vga1: <Generic ISA VGA> failed to probe on isa0 isa_probe_children: probing PnP devices unknown: <PNP0303> can't assign resources unknown: <PNP0303> at port 0x60 on isa0 unknown: <PNP0800> failed to probe at port 0x61 on isa0 unknown: <PNP0c02> can't assign resources unknown: <PNP0c02> at iomem 0xd8000-0xdbfff on isa0 psmcpnp0: <PS/2 mouse port> at irq 12 on isa0 atkbd1: unable to allocate IRQ psm0: current command byte:0047 psm0: the aux port is not functioning (-1). fdc1: cannot reserve I/O port range (1 ports) unknown: <PC standard floppy disk controller> failed to probe on isa0 BIOS Geometries: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. splash: image decoder found: logo_saver bpf: faith0 attached bpf: lo0 attached bpf: ppp0 attached ad0: success setting UDMA4 on Acer chip Creating DISK ad0 ad0: <IC25N030ATDA04-0/DA4OA70A> ATA-5 disk at ata0-master ad0: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA66 ad0: piomode=4 dmamode=2 udmamode=5 cblid=1 Mounting root from ufs:/dev/ad0s2a ad0s1: type 0xc, start 417690, end = 4658849, size 4241160 : OK ad0s2: type 0xa5, start 4658850, end = 57898259, size 53239410 : OK ad0s3: type 0x83, start 63, end = 417689, size 417627 : OK ad0s4: type 0xa0, start 57898260, end = 58605119, size 706860 : OK start_init: trying /sbin/init Linux ELF exec handler installed ----Next_Part(Mon_Sep_17_02:03:21_2001_142)---- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010917.020321.74756726.iwasaki>