Date: Fri, 16 Nov 2001 14:55:40 -0800 From: Mike Smith <msmith@freebsd.org> To: Sandeep Joshi <sandeepj@research.bell-labs.com> Cc: hackers@freebsd.org, msmith@mass.dis.org Subject: Re: Tracking down "BTX halted" Message-ID: <200111162255.fAGMteo03753@mass.dis.org> In-Reply-To: Message from Sandeep Joshi <sandeepj@research.bell-labs.com> of "Fri, 16 Nov 2001 15:39:58 EST." <3BF5799E.1DBCB8A0@research.bell-labs.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> I was hoping its easy enough to crack this myself (with some online > tips & references) but John Baldwin convinced me otherwise :-) The evidence suggests that my original analysis is correct: > Error message when the SCSI disk is attached to > the AIC-7896 SCSI BIOS v2.20s1B1 ... > cs=c800 ds=0040 ed=9e3e fs=0000 gs=0000 ss=9e3e ... > Error message when the SCSI disk is attached to > the AHA2940U2W SCSI BIOS v2.20 : ... > cs=cd80 ds=0040 ed=9e3e fs=0000 gs=0000 ss=9e3e Both of these are failures inside the BIOS on these SCSI cards. You'll have to come up with a "correct" MBR partition table for these controllers. You might get away with 'disklabel auto', but if not, you'll have to use fdisk. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200111162255.fAGMteo03753>