Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 21 Nov 2001 22:46:11 -0500 (EST)
From:      Garrett Wollman <wollman@hergotha.lcs.mit.edu>
To:        sparc@FreeBSD.org
Subject:   woo-hoo!
Message-ID:  <200111220346.fAM3kBB26761@hergotha.lcs.mit.edu>

next in thread | raw e-mail | index | archive | help
With the latest main-sym kernel:

Boot device: /pci@1f,0/pci@1,1/network@1,1  File and args: 
Using Onboard Transceiver - Link Up. 
Timeout waiting for ARP/RARP packet
1f5800 
Server  IP address: 18.24.4.193 
Client  IP address: 18.24.4.196 
calling kernel...
sparc64_init: mdp=0xc0238aa8 kmdp=0xc0238aa8 boothowto=2048 envp=0xc0238aa0 end=0xc0400000
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-SPARC64-TMM #11: Thu Nov 22 00:01:01 CET 2001
    tmm@raven.local:/p4/tmm/sparc64/sys/sparc64/compile/ULTRASYM
Preloaded elf kernel "kernel" at 0xc0238aa8.
Timecounter "tick"  frequency 333000000 Hz
CPU: Sun Microsystems UltraSparc-IIi Processor (333.00 MHZ CPU)
  mask=0x13 maxtl=5 maxwin=7
null: <null device, zero device>
mem: <memory & I/O>
nexus0: <OpenFirmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0
DVMA map: c0000000 to dfffffff
pci0: physical bus=0
found-> vendor=0x108e, dev=0x5000, revid=0x13
        bus=0, slot=1, func=0
        class=06-04-00, hdrtype=0x01, mfdev=1
found-> vendor=0x108e, dev=0x5000, revid=0x13
        bus=0, slot=1, func=1
        class=06-04-00, hdrtype=0x01, mfdev=1
pci0: <PCI bus> on pcib0
pcib1: <APB PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     2
pcib1:   subordinate bus   255
pcib1:   I/O decode        0x0-0x1fffff, 0x200000-0x3fffff, 0x400000-0x5fffff, 0x600000-0x7fffff, 0x800000-0x9fffff, 0xa00000-0xbfffff
pcib1:   memory decode     0x0-0x1fffffff, 0x20000000-0x3fffffff, 0x40000000-0x5fffffff, 0x60000000-0x7fffffff, 0x80000000-0x9fffffff, 0xa0000000-0xbfffffff
pci1: physical bus=2
        map[10]: type 4, range 32, base 00000400, size  8, port disabled
        map[14]: type 1, range 32, base 00002000, size  8, memory disabled
        map[18]: type 1, range 32, base 00004000, size 12, enabled
found-> vendor=0x1000, dev=0x000f, revid=0x14
        bus=2, slot=2, func=0
        class=01-00-00, hdrtype=0x00, mfdev=1
        intpin=a, irq=20
        map[10]: type 4, range 32, base 00000800, size  8, port disabled
        map[14]: type 1, range 32, base 00006000, size  8, memory disabled
        map[18]: type 1, range 32, base 00008000, size 12, enabled
found-> vendor=0x1000, dev=0x000f, revid=0x14
        bus=2, slot=2, func=1
        class=01-00-00, hdrtype=0x00, mfdev=1
        intpin=b, irq=21
pci1: <PCI bus> on pcib1
sym0: <875> port 0x400-0x4ff mem 0x4000-0x4fff,0x2000-0x20ff irq 20 at device 2.0 on pci1
pcib1: device sym0 requested decoded memory range 0x2000-0x20ff
pcib1: device sym0 requested decoded memory range 0x4000-0x4fff
sym0: chip clock is 40218KHz
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym1: <875> port 0x800-0x8ff mem 0x8000-0x8fff,0x6000-0x60ff irq 21 at device 2.1 on pci1
pcib1: device sym1 requested decoded memory range 0x6000-0x60ff
pcib1: device sym1 requested decoded memory range 0x8000-0x8fff
sym1: chip clock is 40218KHz
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
pcib2: <APB PCI-PCI bridge> at device 1.1 on pci0
pcib2:   secondary bus     1
pcib2:   subordinate bus   1
pcib2:   I/O decode        0xc00000-0xdfffff, 0xe00000-0xffffff
pcib2:   memory decode     0xe0000000-0xffffffff
pci2: physical bus=1
        map[10]: type 1, range 32, base f0000000, size 24, enabled
        map[14]: type 1, range 32, base f1000000, size 23, enabled
found-> vendor=0x108e, dev=0x1000, revid=0x01
        bus=1, slot=1, func=0
        class=06-80-00, hdrtype=0x00, mfdev=1
        map[10]: type 1, range 32, base e0000000, size 15, memory disabled
found-> vendor=0x108e, dev=0x1001, revid=0x01
        bus=1, slot=1, func=1
        class=02-00-00, hdrtype=0x00, mfdev=1
        intpin=(broken), irq=33
        map[10]: type 1, range 32, base e1000000, size 24, memory disabled
        map[14]: type 4, range 32, base 00000000, size  8, port disabled
        map[18]: type 1, range 32, base e2000000, size 12, enabled
found-> vendor=0x1002, dev=0x4750, revid=0x5c
        bus=1, slot=2, func=0
        class=03-00-00, hdrtype=0x00, mfdev=0
        intpin=a, irq=15
        map[10]: type 4, range 32, base 00c00000, size  3, enabled
        map[14]: type 4, range 32, base 00c00008, size  2, enabled
        map[18]: type 4, range 32, base 00c00010, size  3, enabled
        map[1c]: type 4, range 32, base 00c00018, size  2, enabled
        map[20]: type 4, range 32, base 00c00020, size  4, enabled
found-> vendor=0x1095, dev=0x0646, revid=0x03
        bus=1, slot=3, func=0
        class=01-01-8f, hdrtype=0x00, mfdev=0
        intpin=a, irq=32
pci2: <PCI bus> on pcib2
pci2: <bridge, PCI-unknown> at device 1.0 (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff irq 33 at device 1.1 on pci2
pcib2: device hme0 requested decoded memory range 0xe0000000-0xe0007fff
hme0: Ethernet address: 08:00:20:b0:82:89
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <display, VGA> at device 2.0 (no driver attached)
pci2: <mass storage, ATA> at device 3.0 (no driver attached)
Waiting 2 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
(probe0:sym0:0:0:0): Retrying Command
Creating DISK da0

Manual root filesystem specification:
  <fstype>:<device>  Mount <device> using filesystem <fstype>
                       eg. ufs:/dev/da0s1a
  ?                  List valid disk boot devices
  <empty line>       Abort manual input

mountroot> ufs:/dev/da0a
Mounting root from ufs:/dev/da0a
da0 at sym0 bus 0 target 0 lun 0
da0: <IBM DNES-318350W S80K> Fixed Direct Access SCSI-3 device 
da0: Serial Number AKF03354        
da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da0s1: type 0x8e, start 16777216, end = 4158857729, size 4142080514 
da0s1: C/H/S start 0/0/2 (1) != start 16777216: invalid
da0s1: C/H/S end 182/254/63 (2939894) != end 4158857729: invalid
da0s1: slice extends beyond end of disk: truncating from 4142080514 to 19066454 sectors
Root mount failed: 22

Manual root filesystem specification:
  <fstype>:<device>  Mount <device> using filesystem <fstype>
                       eg. ufs:/dev/da0s1a
  ?                  List valid disk boot devices
  <empty line>       Abort manual input



Once I get back from Thanksgiving vacation hopefully I can play with
this some more and maybe get an operating system actually installed.

-GAWollman


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-sparc" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200111220346.fAM3kBB26761>