Date: Fri, 14 Dec 2001 09:52:41 -0500 From: Mike Galvez <mrg8n@virginia.edu> To: Jacob Frelinger <jolly@thecoffinclub.com> Cc: questions@freebsd.org Subject: Re: mt: /dev/nsa0: Device not configured Message-ID: <20011214095241.B58655@mail.virginia.edu> In-Reply-To: <20011213195704.A28371@thecoffinclub.com>; from jolly@thecoffinclub.com on Thu, Dec 13, 2001 at 07:57:04PM -0500 References: <20011213195704.A28371@thecoffinclub.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Dec 13, 2001 at 07:57:04PM -0500, Jacob Frelinger wrote: > i'm having trouble getting a dat drive working in freebsd-stable (4.4). > its a seagate turbodat autoloader (dds2), and the kernel probes it happily > (see attached dmesg) and the scsi chain is correctly terminated. any > commands that access the tape drive come back with " /dev/nsa0: Device > not configured" > > please cc me in replies as i'm not currently supscribed to freebsd-questions > -- > Jacob "I'm Brainy For Zombie Pops" Frelinger > Resident Psycho http://www.thecoffinclub.com > Jolly at TheCoffinClub dot Com > Copyright (c) 1992-2001 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 4.4-STABLE #1: Thu Sep 27 18:44:35 EDT 2001 > root@eve.thecoffinclub.com:/usr/obj/usr/src/sys/EVE > Timecounter "i8254" frequency 1193182 Hz > CPU: Pentium Pro (199.31-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x617 Stepping = 7 > Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV> > real memory = 100663296 (98304K bytes) > config> q > avail memory = 94552064 (92336K bytes) > Preloaded elf kernel "kernel" at 0xc035a000. > Preloaded userconfig_script "/boot/kernel.conf" at 0xc035a09c. > Pentium Pro MTRR support enabled > md0: Malloc disk > apm0: <APM BIOS> on motherboard > apm: found APM BIOS v1.2, connected at v1.2 > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Host to PCI bridge> on motherboard > pci0: <PCI bus> on pcib0 > isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel PIIX3 ATA controller> port 0xffa0-0xffaf at device 7.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > vx0: <3COM 3C595 Fast Etherlink III PCI> port 0x7f80-0x7f9f irq 10 at device 9.0 on pci0 > utp/tx[*tx*]: disable 'auto select' with DOS util! address 00:a0:24:cd:af:6b > vx0: driver is using old-style compatibility shims > ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xec00-0xecff mem 0xffaff000-0xffafffff irq 11 at device 10.0 on pci0 > aic7880: Ultra Single Channel A, SCSI Id=7, 16/255 SCBs > isa0: too many dependant configs (8) > isa0: unexpected small tag 14 > orm0: <Option ROMs> at iomem 0xc8000-0xc87ff,0xf1000-0xf1fff on isa0 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A, console > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > plip0: <PLIP network interface> on ppbus0 > sbc0: <Creative SB AWE64> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0 > pcm0: <SB16 DSP 4.16> on sbc0 > ad0: 9641MB <Maxtor 91010D6> [19590/16/63] at ata0-master WDMA2 > Waiting 15 seconds for SCSI devices to settle > sa0 at ahc0 bus 0 target 4 lun 0 > sa0: <ARCHIVE 4586XX 28887-XXX 0420> Removable Sequential Access SCSI-2 device > sa0: 5.000MB/s transfers (5.000MHz, offset 15) > pass2 at ahc0 bus 0 target 4 lun 1 > pass2: <ARCHIVE 4586XX 28887-XXX 0420> Removable Changer SCSI-2 device > pass2: 5.000MB/s transfers (5.000MHz, offset 15) > Mounting root from ufs:/dev/ad0s1a > cd0 at ahc0 bus 0 target 1 lun 0 > cd0: <SONY CD-ROM CDU-76S 1.1c> Removable CD-ROM SCSI-2 device > cd0: 5.681MB/s transfers (5.681MHz, offset 15) > cd0: Attempt to query device size failed: NOT READY, Medium not present > da0 at ahc0 bus 0 target 5 lun 0 > da0: <IOMEGA ZIP 100 J.03> Removable Direct Access SCSI-2 device > da0: 3.300MB/s transfers > da0: Attempt to query device size failed: NOT READY, Medium not present Do you have a tape in the drive? I have received this message before when I forget to put a tape in and issue an mt command. -- Michael Galvez Computer Systems Sr. Engineer Office: 804-982-2975 Financial Analysis E-Mail: mrg8n@virginia.edu University of Virginia Messenger Mail: Carruthers Hall BLISS is ignorance To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011214095241.B58655>