Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 15 Feb 2002 08:39:15 -0800
From:      John <jwd@FreeBSD.org>
To:        Stable List <freebsd-stable@FreeBSD.org>
Subject:   ATA raid panic
Message-ID:  <20020215083914.A8521@FreeBSD.org>

next in thread | raw e-mail | index | archive | help
Hi,

   Running a 4.5-STABLE from today (2Feb2002 11am EST), with

options         INVARIANTS
options         INVARIANT_SUPPORT

   added to the config file, trying to mount an ataraid volume
panics the kernel.  This does not happen if the INVARIANTS
options are not turned on. Has anyone seen anything similar?
Some quick searches don't show anything relevant.

Thanks,
John

# mount /dev/ar0s1a    /vol/backups
panic: biodone: bp 0xc5793200 not busy 0
Debugger("panic")
Stopped at      Debugger+0x34:  movb    $0,in_Debugger.426
db> t
Debugger(c0381dfb) at Debugger+0x34
panic(c0385e97,c5793200,0,c55aa400,c571bd40) at panic+0x70
biodone(c5793200,c55aa4bc,c5793200,c5215900,400500) at biodone+0x5a
ad_interrupt(c571bd40,c5204c00,c03c1320,c03509c9,c5215900) at
ad_interrupt+0x31f
ata_intr(c5215900,68d440,c0,0,c03c1380) at ata_intr+0x1ea
intr_mux(c5204fe0,400100,10,10,10) at intr_mux+0x1d
Xresume10() at Xresume10+0x2b
--- interrupt, eip = 0xc0334db2, esp = 0xc03c1368, ebp = 0xc03c1380 ---
vec10(c) at vec10+0x2
rtcintr(0,0,10,10,10) at rtcintr+0x1b
Xresume8() at Xresume8+0x2b
--- interrupt, eip = 0xc0350ee4, esp = 0xc03c13d4, ebp = 0 ---
spl0() at spl0+0x18
db> 


   The dmesg output below shows the config:


%dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #0: Fri Feb 15 16:18:41 GMT 2002
    toor@bb03na2a.abc.def.com:/usr/src/sys/compile/ATARAID
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD Athlon(tm) XP 1800+ (1533.99-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x662  Stepping = 2
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0480000<<b19>,AMIE,DSP,3DNow!>
real memory  = 2147418112 (2097088K bytes)
avail memory = 2086711296 (2037804K bytes)
Preloaded elf kernel "kernel" at 0xc04b3000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00fdef0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xa800-0xa83f mem 0xe3020000-0xe303ffff,0xe3061000-0xe3061fff irq 5 at device 8.0 on pci0
fxp0: Ethernet address 00:02:b3:98:6d:9c
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xa000-0xa03f mem 0xe3040000-0xe305ffff,0xe3060000-0xe3060fff irq 10 at device 9.0 on pci0
fxp1: Ethernet address 00:02:b3:98:70:1f
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp2: <Intel Pro 10/100B/100+ Ethernet> port 0xa400-0xa43f mem 0xe3000000-0xe301ffff,0xe3062000-0xe3062fff irq 5 at device 11.0 on pci0
fxp2: Ethernet address 00:02:b3:98:70:22
inphy2: <i82555 10/100 media interface> on miibus2
inphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib2: <DEC 21154 PCI-PCI bridge> at device 13.0 on pci0
pci2: <PCI bus> on pcib2
pcib3: <DEC 21154 PCI-PCI bridge> at device 0.0 on pci2
pci3: <PCI bus> on pcib3
amr0: <AMI MegaRAID> mem 0xd0000000-0xd7ffffff irq 12 at device 0.0 on pci3
amr0: <PERC 3/DC> Firmware 161J, BIOS 3.17, 128MB RAM
pci2: <unknown card> (vendor=0x1077, dev=0x1216) at 1.0 irq 11
pci0: <Matrox MGA Millennium II 2164W graphics accelerator> at 16.0 irq 11
isab0: <PCI to ISA bridge (vendor=1106 device=3074)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xac00-0xac0f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
atapci1: <HighPoint HPT372 ATA100 controller> port 0xcc00-0xccff,0xc800-0xc803,0xc400-0xc407,0xc000-0xc003,0xbc00-0xbc07 irq 10 at device 19.0 on pci0
ata2: at 0xbc00 on atapci1
ata3: at 0xc400 on atapci1
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xce000-0xcf7ff,0xd0000-0xd17ff,0xd2000-0xd37ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 19595MB <QUANTUM FIREBALLP AS20.5> [39813/16/63] at ata0-master UDMA100
ar0: 381584MB <ATA RAID0 array> [48645/255/63] subdisks:
  ad4: 95396MB <WDC WD1000BB-00CAA0> [193821/16/63] at ata2-master UDMA100
  ad6: 95396MB <WDC WD1000BB-00CAA0> [193821/16/63] at ata3-master UDMA100
  ad5: 95396MB <WDC WD1000BB-00CAA0> [193821/16/63] at ata2-slave UDMA100
  ad7: 95396MB <WDC WD1000BB-00CAA0> [193821/16/63] at ata3-slave UDMA100
acd0: CDROM <SONY CD-ROM CDU5221> at ata1-master using PIO4
amrd0: <MegaRAID logical drive> on amr0
amrd0: 20440MB (41861120 sectors) RAID 5 (optimal)
amrd1: <MegaRAID logical drive> on amr0
amrd1: 768658MB (1574211584 sectors) RAID 5 (optimal)
Mounting root from ufs:/dev/amrd0s1a
WARNING: / was not properly dismounted


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020215083914.A8521>