Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 24 Feb 2002 23:15:34 -0800 (PST)
From:      Matthew Dillon <dillon@apollo.backplane.com>
To:        "Kenneth D. Merry" <ken@kdm.org>
Cc:        Glenn Gombert <ggombert@imatowns.com>, Andrew Kenneth Milton <akm@theinternet.com.au>, current@FreeBSD.ORG
Subject:   Re: -current hangs with SMP enabled
Message-ID:  <200202250715.g1P7FYi46805@apollo.backplane.com>
References:  <20020224175635.A47442@panzer.kdm.org> <20020224175635.A47442@panzer.kdm.org> <20020225111513.G40004@zeus.theinternet.com.au> <3.0.6.32.20020224210202.00da4f18@imatowns.com> <20020224193029.A48055@panzer.kdm.org>

next in thread | previous in thread | raw e-mail | index | archive | help

:...
:> stuff (it was not used on that machine) and it booted fine, I think that
:> might just cure the SMP problem you are seeing too.....
:
:Thanks for the suggestion.
:
:Unfortunately it still hangs with SMP enabled and the ATA drivers commented
:out of the GENERIC config.
:
:Ken
:-- 
:Kenneth Merry

    Just as a data point, I've been running -current on a 2xCPU SMP
    system (DELL2550) for a few weeks and it's always booted fine.

    For the last few months I have noticed occassional freezes occuring
    at odd times long after boot.  I have no idea why it happens.

					-Matt

#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.260 2000/06/13 22:28:46 peter Exp $

machine		i386
#cpu		I386_CPU
#cpu		I486_CPU
#cpu		I586_CPU
cpu		I686_CPU
ident		DELL2550
maxusers	0

hints		"TEST.hints"		#Default places to look for devices.

options         SCSI_DELAY=5000
#options         MAXMEM="(64*1024)"
options         DDB
options         INVARIANTS
options         INVARIANT_SUPPORT
options		SOFTUPDATES
#options		WITNESS
#options	SHMALL=65537
#options	SHMMAXPGS=65537
#options         GDB_REMOTE_CHAT
options         ALT_BREAK_TO_DEBUGGER

# -Os broken
#
makeoptions     DEBUG=-g                #Build kernel with gdb(1) debug symbols
makeoptions     COPTFLAGS="-O -pipe"

#options 	MATH_EMULATE		#Support for x87 emulation
options 	INET			#InterNETworking
#options 	INET6			#IPv6 communications protocols
options 	FFS			#Berkeley Fast Filesystem
options 	MD_ROOT			#MD is a potential root device
options 	NFSCLIENT		#Network Filesystem
options 	NFSSERVER		#Network Filesystem
options 	NFS_ROOT		#NFS usable as root device, NFS required
options 	MSDOSFS			#MSDOS Filesystem
options 	CD9660			#ISO 9660 Filesystem
options 	PSEUDOFS		#Pseudofs
options 	PROCFS			#Process filesystem
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
#options 	SCSI_DELAY=15000	#Delay (in ms) before probing SCSI
options 	UCONSOLE		#Allow users to grab the console
options 	KTRACE			#ktrace(1) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
#options 	P1003_1B		#Posix P1003_1B real-time extensions
#options 	_KPOSIX_PRIORITY_SCHEDULING
#options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev

# To make an SMP kernel, the next two are needed
#
options 	SMP			# Symmetric MultiProcessor Kernel
options 	APIC_IO			# Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options 	NCPU=2			# number of CPUs
#options 	NBUS=8			# number of busses
#options 	NAPIC=1			# number of IO APICs
#options 	NINTR=24		# number of INTs

device		isa
#device		eisa
device		pci
#options 	COMPAT_OLDISA		# compatability shims for lnc, fe, le
#options 	COMPAT_OLDPCI		# compatability shims for lnc, vx

# Floppy drives
device		fdc

# ATA and ATAPI devices
device		ata
device		atadisk			# ATA disk drives
device		atapicd			# ATAPI CDROM drives
device		atapifd			# ATAPI floppy drives
device		atapist			# ATAPI tape drives
options 	ATA_STATIC_ID		#Static device numbering
#options 	ATA_ENABLE_ATAPI_DMA	#Enable DMA on ATAPI devices

# SCSI Controllers
#device		ahb		# EISA AHA1742 family
device		ahc		# AHA2940 and onboard AIC7xxx devices
#device		amd		# AMD 53C974 (Teckram DC-390(T))
#device		dpt		# DPT Smartcache - See LINT for options!
#device		isp		# Qlogic family
#device		ncr		# NCR/Symbios Logic
#device		sym		# NCR/Symbios Logic (newer chipsets)

#device		adv
#device		adw
#device		bt
#device		aha
#device		aic

# SCSI peripherals
device		scbus		# SCSI bus (required)
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)

# RAID controllers
#device		ida		# Compaq Smart RAID
#device		amr		# AMI MegaRAID
#device		mlx		# Mylex DAC960 family

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc
device		atkbd
device		psm

device		vga

# splash screen/screen saver
device		splash

# syscons is the default console driver, resembling an SCO console
device		sc

# Enable this for the pcvt (VT220 compatible) console driver
#device		vt
#options 	XSERVER			# support for X server on a vt console
#options 	FAT_CURSOR		# start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options 	PCVT_SCANSET=2		# IBM keyboards are non-std

# Floating point support - do not disable.
device		npx

## Power management support (see LINT for more options)
#device		apm
#
## PCCARD (PCMCIA) support
#device		card
#device		pcic

# Serial (COM) ports
device		sio

## Parallel port
#device		ppc
#device		ppbus		# Parallel port bus (required)
#device		lpt		# Printer
#device		plip		# TCP/IP over parallel
#device		ppi		# Parallel port interface device
##device	vpo		# Requires scbus and da


# PCI Ethernet NICs.
device		de		# DEC/Intel DC21x4x (``Tulip'')
device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
#device		tx		# SMC 9432TX (83c170 ``EPIC'')
#device		vx		# 3Com 3c590, 3c595 (``Vortex'')
#device		wx		# Intel Gigabit Ethernet Card (``Wiseman'')

# PCI Ethernet NICs that use the common MII bus controller code.
device		miibus		# MII bus support
device		dc		# DEC/Intel 21143 and various workalikes
#device		rl		# RealTek 8129/8139
#device		sf		# Adaptec AIC-6915 (``Starfire'')
#device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
#device		ste		# Sundance ST201 (D-Link DFE-550TX)
#device		tl		# Texas Instruments ThunderLAN
#device		vr		# VIA Rhine, Rhine II
#device		wb		# Winbond W89C840F
#device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')

## ISA Ethernet NICs.
#device		ed
#device		ex
#device		ep
#device		cs
#device		sn
## WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
## exists only as a PCMCIA device, so there is no ISA attatement needed
## and resources will always be dynamically assigned by the pccard code.
#device		wi
## Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
## work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
## mode (the factory default). If you set the switches on your ISA
## card for a manually chosen I/O address and IRQ, you must specify
## those paremeters here.
#device		an
## BayStack 660 and others
#device		awi
## Xircom pccard ethernet
#device		xe
## The probe order of these is presently determined by i386/isa/isa_compat.c.
#device		ie
#device		fe
#device		le
#device		lnc

# Pseudo devices - the number indicates how many units to allocated.
device		random		# Network loopback
device		loop		# Network loopback
device		ether		# Ethernet support
device		sl	4	# Kernel SLIP
device		ppp		# Kernel PPP
device		tun	4	# Packet tunnel.
device		pty		# Pseudo-ttys (telnet etc)
device		ccd
device		md		# Memory "disks"
device		gif	4	# IPv6 and IPv4 tunneling
device		faith		# IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device		bpf	4	# Berkeley packet filter
device		bktr

## USB support
#device		uhci		# UHCI PCI->USB interface
#device		ohci		# OHCI PCI->USB interface
#device		usb		# USB Bus (required)
##device		udbp		# USB Double Bulk Pipe devices
#device		ugen		# Generic
#device		uhid		# "Human Interface Devices"
#device		ukbd		# Keyboard
#device		ulpt		# Printer
#device		umass		# Disks/Mass storage - Requires scbus and da
#device		ums		# Mouse
#device		urio		# Diamond Rio 500 MP3 player
## USB Ethernet, requires mii
#device		aue		# ADMtek USB ethernet
#device		cue		# CATC USB ethernet
#device		kue		# Kawasaki LSI USB ethernet

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200202250715.g1P7FYi46805>