Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 13 Mar 2002 10:42:39 -0700 (MST)
From:      Les Biffle <les@safety.net>
To:        freebsd-mobile@freebsd.org
Subject:   Sierra Wireless AirCard support?
Message-ID:  <200203131742.g2DHget21728@ns3.safety.net>

next in thread | raw e-mail | index | archive | help
Hello all,

We have a brand new Sierra Wireless AirCard 555 that is activated on the
Verizon network, and wondered about the current status of support for
the various Sierra Wireless cards.  The thread from November was
interesting, but didn't seem to reach any conclusions.  Has anyone had
any luck?  We _REALLY_ want to get this new card working, and need
suggestions and help.

Here is the dumpcis output for the card.  We're running 4.5-STABLE as
of March 6, 2002.  I note that the card claims to be a network card.

Thanks,

-Les

Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
    000:  00 ff
	Common memory device information:
		Device number 1, type No device, WPS = OFF
		Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3
    000:  41 00 ff
	Attribute memory device information:
		Device number 1, type EEPROM, WPS = OFF
		Speed = 250nS, Memory block size = 512b, 1 units
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
    000:  92 01 55 a5
	PCMCIA ID = 0x192, OEM ID = 0xa555
Tuple #4, code = 0x21 (Functional ID), length = 2
    000:  06 00
	Network/LAN adapter
Tuple #5, code = 0x15 (Version 1 info), length = 42
    000:  07 00 53 69 65 72 72 61 20 57 69 72 65 6c 65 73
    010:  73 00 41 69 72 43 61 72 64 20 35 35 35 00 41 35
    020:  35 35 00 52 65 76 20 31 00 ff
	Version = 7.0, Manuf = [Sierra Wireless], card vers = [AirCard 555]
	Addit. info = [A555],[Rev 1]
Tuple #6, code = 0x1a (Configuration map), length = 5
    000:  01 03 00 07 73
	Reg len = 2, config register addr = 0x700, last config = 0x3
	Registers: XX--XXX- 
Tuple #7, code = 0x1b (Configuration entry), length = 9
    000:  c1 41 19 01 55 66 30 f8 ff
	Config index = 0x1(default)
	Interface byte = 0x41 (I/O)  +RDY/-BSY active
	Vcc pwr:
		Nominal operating supply voltage: 5 x 1V
	Card decodes 6 address lines, full 8/16 Bit I/O
		IRQ modes: Level
		IRQs:  3 4 5 6 7 8 9 10 11 12 13 14 15
Tuple #8, code = 0xff (Terminator), length = 0

-- 
Les Biffle            
(480) 585-4099    les@safety.net  http://www.les.safety.net/
Network Safety Corp., 5831 E. Dynamite Blvd.,  Cave Creek, AZ 85331

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200203131742.g2DHget21728>