Date: Fri, 15 Mar 2002 23:11:45 +0100 From: Wilko Bulte <wkb@freebie.xs4all.nl> To: current@freebsd.org Subject: strange apm/acpi message on CPQ Armada E700 Message-ID: <20020315231145.A11629@freebie.xs4all.nl>
next in thread | raw e-mail | index | archive | help
Hi
I just went -current with my Compaq Armada E700 laptop.
Coming from -stable.
I'm a bit puzzled by:
WKB ~: apm
APM version: 1.2
APM Managment: Enabled
AC Line status: off-line
Battery status: charging
Remaining battery life: invalid value (0xffffffff)
Remaining battery time: unknown
Number of batteries: 0
APM Capacities:
unknown
dmesg also has some strange things it appears
Rebooting...
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #2: Fri Mar 15 22:48:40 CET 2002
root@wilklt.wbnet:/usr/src/sys/i386/compile/WILKLT
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0436000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04360a8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 498669634 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (498.67-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268369920 (262080K bytes)
avail memory = 256614400 (250600K bytes)
Pentium Pro MTRR support enabled
Using $PIR table, 268435454 entries at 0xc00f0970
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <COMPAQ RSDTBL > on motherboard
ACPI-1305: *** Error: Method execution failed, AE_AML_REGION_LIMIT
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 5
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_acad0: <AC adapter> on acpi0
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcic0: <TI PCI-1450 PCI-CardBus Bridge> mem 0x41100000-0x41100fff irq 11 at device 4.0 on pci0
pcic0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <TI PCI-1450 PCI-CardBus Bridge> mem 0x41180000-0x41180fff irq 11 at device 4.1 on pci0
pcic1: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
pccard1: <PC Card bus (classic)> on pcic1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x3420-0x342f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x3400-0x341f irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcm0: <ESS Technology Maestro-2E> port 0x3000-0x30ff irq 11 at device 8.0 on pci0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x3440-0x347f mem 0x41200000-0x4121ffff,0x41280000-0x41280fff irq 11 at device 9.0 on pci0
fxp0: Ethernet address 00:d0:59:0b:f3:c2
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <simple comms, UART> at device 9.1 (no driver attached)
orm0: <Option ROMs> at iomem 0xd0000-0xd17ff,0xc0000-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
IPsec: Initialized Security Association Processing.
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
system power profile changed to 'economy'
ad0: 17301MB <IBM-DARA-218000> [35152/16/63] at ata0-master UDMA33
acd0: DVD-ROM <Compaq DRN8040B> at ata0-slave PIO4
Mounting root from ufs:/dev/ad0s2a
--
| / o / /_ _ wilko@FreeBSD.org
|/|/ / / /( (_) Bulte Arnhem, the Netherlands
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020315231145.A11629>