Date: Thu, 13 Jun 2002 16:13:46 -0400 (EDT) From: Dan Langille <dan@langille.org> To: Archie Cobbs <archie@dellroad.org> Cc: freebsd-net@freebsd.org Subject: Re: mpd for pptp - can't connect Message-ID: <20020613160129.P17320-100000@m20.unixathome.org> In-Reply-To: <200206131956.g5DJud819813@arch20m.dellroad.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 13 Jun 2002, Archie Cobbs wrote: > Dan Langille writes: > > [vpn] rec'd unexpected protocol CCP on link 0, rejecting > > The peer wants to do MPPE encryption but you haven't enabled it. > > > [vpn] IPCP: rec'd Configure Nak #1 link 0 (Ack-Sent) > > IPADDR 10.0.1.26 > > 10.0.1.26 is unacceptable > > You need to relax your 'set ipcp ranges' as the peer wants to > assign you an IP address and you're not letting it. I did have: set ipcp ranges 192.168.0.21/32 10.0.1.18/32 I just tried: set ipcp ranges 10.0.1.0/24 10.0.1.0/24 [vpn] CHAP: sending RESPONSE [vpn] CHAP: rec'd SUCCESS #0 MESG: S=A900924089CB64D1C2696C418A9D5392FE7F289F [vpn] LCP: authorization successful [vpn] LCP: phase shift AUTHENTICATE --> NETWORK [vpn] up: 1 link, total bandwidth 64000 bps [vpn] IPCP: Up event [vpn] IPCP: state change Starting --> Req-Sent [vpn] IPCP: SendConfigReq #1 IPADDR 10.0.1.0 [vpn] rec'd unexpected protocol CCP on link 0, rejecting [vpn] IPCP: rec'd Configure Request #4 link 0 (Req-Sent) IPADDR 10.0.1.18 10.0.1.18 is OK [vpn] IPCP: SendConfigAck #4 IPADDR 10.0.1.18 [vpn] IPCP: state change Req-Sent --> Ack-Sent [vpn] IPCP: rec'd Configure Nak #1 link 0 (Ack-Sent) IPADDR 10.0.1.26 10.0.1.26 is OK [vpn] IPCP: SendConfigReq #2 IPADDR 10.0.1.26 [vpn] LCP: rec'd Terminate Request #5 link 0 (Opened) [vpn] LCP: state change Opened --> Stopping [vpn] LCP: phase shift NETWORK --> TERMINATE [vpn] up: 0 links, total bandwidth 9600 bps [vpn] IPCP: Down event [vpn] IPCP: state change Ack-Sent --> Starting [vpn] LCP: SendTerminateAck #2 [vpn] LCP: LayerDown pptp0: CID 0x4ac3 in SetLinkInfo not found [vpn] LCP: rec'd Terminate Request #6 link 0 (Stopping) [vpn] LCP: SendTerminateAck #3 [vpn] LCP: state change Stopping --> Stopped [vpn] LCP: phase shift TERMINATE --> ESTABLISH [vpn] LCP: LayerFinish [vpn] device: CLOSE event in state UP pptp0-0: clearing call [vpn] device is now in state CLOSING [vpn] device: DOWN event in state CLOSING [vpn] device is now in state DOWN [vpn] link: DOWN event [vpn] LCP: Down event [vpn] LCP: state change Stopped --> Starting [vpn] LCP: phase shift ESTABLISH --> DEAD [vpn] LCP: LayerStart [vpn] device: OPEN event in state DOWN [vpn] pausing 9 seconds before open [vpn] device is now in state DOWN [vpn] device: OPEN event in state DOWN [vpn] device is now in state DOWN pptp0-0: peer call disconnected res=zero? err=none pptp0-0: killing channel pptp0: closing connection with 1.2.3.4:1723 > It looks like you cut & pasted from the 'vpn' configuration > instead of the 'pptp client' configuration.. ? Yes. I am already running ppp for my DSL connection. mpd is just for a VPN to the office. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-net" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020613160129.P17320-100000>