Date: Thu, 18 Jul 2002 08:12:30 +0200 From: Martin Kahlert <martin.kahlert@infineon.com> To: Jean-Mark <jeanmark@dupx.freeserve.co.uk> Cc: freebsd-isdn@FreeBSD.org Subject: Re: I can only send 30 packackes through my ISDN connection Message-ID: <20020718081230.A28561@keksy.muc.infineon.com> In-Reply-To: <3D363F0B.957C9B30@dupx.freeserve.co.uk>; from jeanmark@dupx.freeserve.co.uk on Thu, Jul 18, 2002 at 05:07:39AM %2B0100 References: <3D363F0B.957C9B30@dupx.freeserve.co.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Jean-Mark, On Thu, Jul 18, 2002 at 05:07:39AM +0100, Jean-Mark wrote: > Since you are using a PCI isdn card it is more than likely it is a > "passive" card, as most are You are right, it is a passive AVM Fritz PCI. > , so there is a strong chance that you need > a simple line terminator going in-between the ISDN cable from your card > to the ISDN socket outlet at the wall. I do not think, that this is a hardware problem: 1. The old Fritz card (unfortunately ISA) works with the same cable/outlet from Linux without any problem. 2. The new Fritz card (PCI) works without any problem in Windows XP. (This is a dual boot system) I needed no confuguration (besides the telephone number of my provider of course) to get it working there. It runs stable - no problems whatsoever. > If you're not sure what a line > terminator is then just ask your usual telecom equipment supplier or > the phone company for one - it looks like a little plastic phone > connector-socket and a connector-plug with a few centimeters of phone > cable attached in-between and the purpose is to adapt a "raw" S0-bus > for passive TA's Do i need this for ISDN adapters (sorry i do not know the english word for it: the thing connected to the real isdn-wall outlet providing a lot of ISDN slots, an internal S0 bus plus some analog slots), too? Thanks Martin. -- The early bird catches the worm. If you want something else for breakfast, get up later. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020718081230.A28561>