Date: Tue, 30 Jul 2002 23:36:10 -0700 (PDT) From: wlw zhang <wlwzhang@yahoo.com> To: freebsd-questions@FreeBSD.org Subject: Question regarding finding and loading device modules for 3 unknown card device Message-ID: <20020731063610.66098.qmail@web13503.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
--0-1248410445-1028097370=:66038 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hi, After build a 4.6 kernel for my DELL OptiPlex GX110, I have 3 unknown device card with command `dmesg|grep unknown`: pci1: <unknown card> (vendor=0x1106, dev=0x3044) at 10.0 irq 11 pci1: <unknown card> (vendor=0x134d, dev=0x7897) at 11.0 irq 9 pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 10 All the cards are following, (vendor=0x1106, dev=0x3044) is a IEEE 1394 PCI card. (vendor=0x134d, dev=0x7897) is a modem PCI card. (vendor=0x8086, dev=0x2413) an intel buildin card, don't know what's it used for. Question. 1. How do I find out all device entries in my kernel conf file? so that I can rebuild it, LINT doesn't seem help at this point. 2. Can I not rebuild my kernel, but just use loader.conf to load those modules at boot time? If yes, where can I find those modules? not sure /boot/defaults/loader.conf will help. 3. Can I use "kldload"? if yes, same question as 2, where can I find the modules for those? Thanks in advance. Regards, Bill P.S. I attached the whole dmesg if you want to see it. __________________________________________________ Do You Yahoo!? Yahoo! Health - Feel better, live better http://health.yahoo.com --0-1248410445-1028097370=:66038 Content-Type: text/plain; name="dmesg.boot" Content-Description: dmesg.boot Content-Disposition: inline; filename="dmesg.boot" Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.6-RELEASE #2: Tue Jul 30 16:53:15 GMT 2002 root@dhcp-154-6.charterpipeline.net:/usr/obj/usr/src/sys/BILLKERNEL Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 664513158 Hz CPU: Pentium III/Pentium III Xeon/Celeron (664.51-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 267051008 (260792K bytes) avail memory = 256204800 (250200K bytes) Preloaded elf kernel "kernel" at 0xc0399000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 9 entries at 0xc00fbc40 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82810E (i810E GMCH) Host To Hub bridge> on motherboard pci0: <PCI bus> on pcib0 pci0: <Intel 82810E (i810E GMCH) SVGA controller> at 1.0 irq 9 pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> at 7.0 irq 9 pci1: <unknown card> (vendor=0x1106, dev=0x3044) at 10.0 irq 11 pci1: <unknown card> (vendor=0x134d, dev=0x7897) at 11.0 irq 9 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe880-0xe8ff mem 0xfcfff400-0xfcfff47f irq 5 at device 12.0 on pci1 xl0: Ethernet address: 00:b0:d0:71:e5:cc miibus0: <MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82801AA (ICH) USB controller> port 0xff80-0xff9f irq 11 at device 31.2 on pci0 usb0: <Intel 82801AA (ICH) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ugen0: ViewQuest Technologies INC. VQ110 Digital Video Camera, rev 1.10/0.00, addr 2 pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 10 chip1: <Intel 82801AA (ICH) AC'97 Audio Controller> port 0xdc80-0xdcbf,0xd800-0xd8ff irq 10 at device 31.5 on pci0 orm0: <Option ROMs> at iomem 0xc0000-0xc97ff,0xc9800-0xcffff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad0: 14324MB <IBM-DTLA-307015> [29104/16/63] at ata0-master UDMA66 ad1: 76319MB <ST380021A> [155061/16/63] at ata0-slave UDMA66 acd0: CDROM <CRD-8482B> at ata1-master PIO4 afd0: 96MB <IOMEGA ZIP 100 ATAPI> [96/64/32] at ata1-slave PIO0 Mounting root from ufs:/dev/ad0s2a --0-1248410445-1028097370=:66038-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020731063610.66098.qmail>