Date: Sun, 22 Sep 2002 07:16:15 -0700 From: "Greg Smith" <freebsd_mail@myrealbox.com> To: freebsd-mobile@freebsd.org Subject: Re: more thinkpad info Message-ID: <200209220716150694.2B44C7BD@smtp.myrealbox.com> In-Reply-To: <3D8D5F47.50201@u.washington.edu> References: <3D8D5F47.50201@u.washington.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
Paul, Just shifting the PCI IRQ should do no good at all. You would want to assign MULTIPLE PCI IRQs to get any benefit. You could assign multiple IRQs to PCI from the following list, as indicated from your output below - 3, 5, 7, 9, 10, 11. Why not try the following: ps2 pciirq 11 10 9 7 Then reboot, and pray that the BIOS and/or FreeBSD are kind enough to spread your devices across the available PCI IRQs. Since your sound is PCI I don't think there is a straight-forward way for you to assign it to an IRQ. Messing with PCI IRQs should just be an exceptional case to get around poor (or overloaded?) device drivers. Greg -----Original Message----- >I ran the ps2 utility and assigned the PCI bus to irq 5: that >didn't help. I then switched it back to 11 and now I have just the >network card, no sound, again. > >Here are the default assignments: > > >Command Syntax : PS2 ? IRQ >Description : Display the current IRQ assignments. >Current State : > System IRQ Assignment > > IRQ Level > 3 4 5 7 9 10 11 15 >Serial-A (3 or 4) : O >Parallel (5 or 7) : X >IR (3, 4, 5, 7) : X >Second IDE : O >PCI IRQ : O > > where O: Currently assigned, > X: Will be assigned after "Enable" is selected, > *: Conflict with another device. > >C:\>ps2 ? pciirq > >Command Syntax : PS2 PCIIRQ Disable > First IRQ (Second IRQ) (Third IRQ) >(Fourth IRQ) > > Valid IRQs : 3|4|5|7|9|10|11|15 > >Assigned IRQ(s) : 11 > >Description : This command is to reserve the IRQ(s) for PCI >devices. > When 'Disable' is specified, PCI device may not work > properly. To see the current system IRQ assignment, > type "PS2 ? IRQ". > >WHile I was poking around in there I disabled the parallel port >and the IR port, but it's not clear if that does me any good. I >don't seem to be able to assign the sound chip to it's own IRQ. > >On my most recent reboot, I removed the network card but sound >failed to work: so much for that theory. > >-- >Paul Beard / 8040 27th Ave NE / Seattle WA 98115 / >paulbeard [at] mac [ dot] com / 206 529 8400 > >weblog @ <http://paulbeard.no-ip.org/movabletype/> > >"Here's something to think about: How come you never see a >headline like >`Psychic Wins Lottery'?" > -- Jay Leno > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-mobile" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200209220716150694.2B44C7BD>