Date: Tue, 15 Oct 2002 13:53:44 -0400 From: Jake Burkholder <jake@locore.ca> To: Maxim Mazurok <maxim@km.ua> Cc: freebsd-sparc@FreeBSD.ORG Subject: Re: booting on Ultra AX fail Message-ID: <20021015135344.I25928@locore.ca> In-Reply-To: <20021015200151.L304@km.ua>; from maxim@km.ua on Tue, Oct 15, 2002 at 08:01:51PM %2B0300 References: <20021015200151.L304@km.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
Apparently, On Tue, Oct 15, 2002 at 08:01:51PM +0300,
Maxim Mazurok said words to the effect of;
> I have OEM motherboard Ultra AX width processor UltraII 250Mz and IDE
> HDD&CDROM (hme ethernet). I download iso image from home of Jake and
> try to boot:
>
> ======cut======
> ok boot cdrom
> Resetting ...
>
> SPARCengine(tm)Ultra(tm) AX (UltraSPARC-II 248MHz), No Keyboard
> OpenBoot 3.1.9, 128 MB memory installed, Serial #8877980.
> Ethernet address 8:0:20:87:77:9c, Host ID: 8087779c.
>
> Rebooting with command: boot cdrom
> Boot device: /pci@1f,4000/ide@3/ata@1,0/cmdk@0,0:f File and args:
>
> >> FreeBSD/sparc64 boot block
> Boot path: /pci@1f,4000/ide@3/ata@1,0/cmdk@0,0:f
> Boot loader: /boot/loader
> Console: OpenFirmware console
> disk0 is /pci@1f,4000/ide@3/ata@1,0/cmdk@0
> FreeBSD/sparc64 loader
> bootpath="/pci@1f,4000/ide@3/ata@1,0/cmdk@0,0:f"
> loaddev=disk0s0a:
> > \
> \: unknown command
> |
> /boot/kernel/kernel data=0x2f7e08+0xec338 syms=[0x8+0x435c0+0x8+0x3527b]
> Hit [Enter] to boot immediately, or any other key for command prompt.
> Booting [/boot/kernel/kernel]...
> nothing to autoload yet.
> jumping to kernel entry at 0xc0038000.
> stray vector interrupt 2029
> Copyright (c) 1992-2002 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 5.0-CURRENT #0: Mon Jun 24 05:46:27 GMT 2002
> jake@u60.locore.ca:/usr/obj/usr/current/src/sys/GENERIC
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0460000.
> Timecounter "tick" frequency 248000000 Hz
> cpu0: Sun Microsystems UltraSparc-II Processor (248.00 MHZ CPU)
> nexus0: <OpenFirmware Nexus device>
> nexus0: <pci>, type pci (no driver attached)
> nexus0: <pci>, type pci (no driver attached)
> Timecounters tick every 10.000 msec
>
> Manual root filesystem specification:
> <fstype>:<device> Mount <device> using filesystem <fstype>
> eg. ufs:da0a
> ? List valid disk boot devices
> <empty line> Abort manual input
>
> mountroot>
> panic: Root mount failed, startup aborted.
> cpuid = 0; Debugger("panic")
> Stopped at `? x+0x1c: ta %xcc, 1
> db> halt
> Program terminated
> ok
> ======cut======
>
> Where is my mistake?
You made no mistake, it seems that machine has an unsupported pci bus
so no devices were probed. Thomas Moestl who ported the pci drivers is
currently on vacation, but I'll mention this to him when he gets back
and hopefully we can get it fixed.
Are you able to boot solaris and send us the output of prtconf?
Thanks,
Jake
>
> --
> Maxim Mazurok (MMP2-RIPE)
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-sparc" in the body of the message
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-sparc" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021015135344.I25928>