Date: Sat, 19 Oct 2002 12:30:12 -0700 (PDT) From: Pete Carah <pete@ns.altadena.net> To: current@freebsd.org Subject: Re: Continuing saga of the VAIO R505ES - now panic in GEOM Message-ID: <200210191930.g9JJUCjC049216@ns.altadena.net> In-Reply-To: From "(env:" "pete)" at "Oct 19, 2002 11:37:34 am"
next in thread | raw e-mail | index | archive | help
Following up on my own message: > Well, now the bad free (actually appeared to me to be a bad malloc or a bad > call to malloc) is fixed; now I get a panic from GEOM (actually from > witness). There are 3 or 4 geom debug messages and then a panic > indicating Giant not owned. I'll follow up with an actual trace from a > serial console soon if desired. (it's a bit of trouble setting up the > serial hookup.) > > As a hint, maybe, I have 3 FBSD slices on this system; might that confuse > geom? (1 each for current and stable, and a big one for home dirs etc.) > > Slice table looks like > NTFS 8G (XP) > FBSD 4G (current) > FBSD 4G (stable) > FBSD 24G (data etc) BTW - the Sony bios boots stable fine so doesn't have an 1g or 8g boot limit. This kernel has DISABLE_PSE and DISABLE_PG_G; they don't appear to have done anything different so far. serial console capture follows: ---------------------------------------------------------------------------- SMAP type=01 base=00000000 00000000 len=00000000 0009e000 SMAP type=02 base=00000000 0009e000 len=00000000 00002000 SMAP type=02 base=00000000 000d8000 len=00000000 00008000 SMAP type=02 base=00000000 000e4000 len=00000000 0001c000 SMAP type=01 base=00000000 00100000 len=00000000 1fbf0000 SMAP type=03 base=00000000 1fcf0000 len=00000000 0000c000 SMAP type=04 base=00000000 1fcfc000 len=00000000 00004000 SMAP type=01 base=00000000 1fd00000 len=00000000 00180000 SMAP type=02 base=00000000 1fe80000 len=00000000 00100000 SMAP type=02 base=00000000 1ff80000 len=00000000 00080000 SMAP type=02 base=00000000 ff800000 len=00000000 00400000 SMAP type=02 base=00000000 fffffc00 len=00000000 00000400 Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #8: Sat Oct 19 11:22:32 PDT 2002 pete@port2.altadena.net:/d/obj-s/current/usr/src/sys/PORT2 Preloaded elf kernel "/boot/kernel/kernel" at 0xc04e3000. Preloaded elf module "/boot/kernel/firewire.ko" at 0xc04e30a8. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04e3158. Calibrating clock(s) ... TSC clock: 1193126632 Hz, i8254 clock: 1193205 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 1193107904 Hz CPU: Pentium III/Pentium III Xeon/Celeron (1193.11-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 535298048 (522752K bytes) Physical memory chunk(s): 0x00001000 - 0x0009dfff, 643072 bytes (157 pages) 0x0050a000 - 0x1fceffff, 528375808 bytes (128998 pages) 0x1fd00000 - 0x1fe77fff, 1540096 bytes (376 pages) avail memory = 513675264 (501636K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f6ba0 bios32: Entry = 0xfd871 (c00fd871) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd870+0x13a pnpbios: Found PnP BIOS data at 0xc00f6bd0 pnpbios: Entry = f0000:880c Rev = 1.0 Other BIOS signatures found: Initializing GEOMetry subsystem g_add_class(DISK) g_add_class(BSD) g_add_class(MBR) g_add_class(MBREXT) g_add_class(GEOMCTL) g_call_me(0xc01c7eb0, 0 g_add_class(DEV) null: <null device, zero device> mem: <memory & I/O> Pentium Pro MTRR support enabled random: <entropy source> npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <SONY C1 > on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=35758086) Using $PIR table, 9 entries at 0xc00fdf30 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 2 5 A 0x69 3 embedded 2 8 A 0x68 9 embedded 0 29 A 0x60 9 embedded 0 29 B 0x63 9 embedded 0 2 A 0x60 9 embedded 0 1 A 0x60 9 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks BAD min = 2, max = 1732, width = 1731 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 ACPI timer looks GOOD min = 2, max = 3, width = 2 Timecounter "ACPI-safe" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \_SB_.LNKA irq 9: [ 9] low,level,sharable 0.1.0 \_SB_.LNKD irq 9: [ 9] low,level,sharable 0.1.3 \_SB_.LNKA irq 9: [ 9] low,level,sharable 0.2.0 \_SB_.LNKA irq 9: [ 9] low,level,sharable 0.29.0 \_SB_.LNKD irq 9: [ 9] low,level,sharable 0.29.1 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \_SB_.LNKA irq 9: [ 9] low,level,sharable 0.1.0 \_SB_.LNKD irq 9: [ 9] low,level,sharable 0.1.3 \_SB_.LNKA irq 9: [ 9] low,level,sharable 0.2.0 \_SB_.LNKA irq 9: [ 9] low,level,sharable 0.29.0 \_SB_.LNKD irq 9: [ 9] low,level,sharable 0.29.1 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base 00000000, size 0, enabled found-> vendor=0x8086, dev=0x3575, revid=0x04 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base e8000000, size 27, enabled map[14]: type 1, range 32, base e0000000, size 19, enabled found-> vendor=0x8086, dev=0x3577, revid=0x04 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 1 supports D0 D1 D3 current D0 map[10]: type 3, range 32, base f0000000, size 27, enabled map[14]: type 1, range 32, base e0080000, size 19, enabled found-> vendor=0x8086, dev=0x3577, revid=0x00 bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x09 (2250 ns) powerspec 1 supports D0 D1 D3 current D0 map[20]: type 4, range 32, base 00001800, size 5, enabled found-> vendor=0x8086, dev=0x2482, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 map[20]: type 4, range 32, base 00001820, size 5, enabled found-> vendor=0x8086, dev=0x2484, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 map[20]: type 4, range 32, base 00001840, size 5, enabled found-> vendor=0x8086, dev=0x2487, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=255 found-> vendor=0x8086, dev=0x2448, revid=0x42 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x248c, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 000001f0, size 3, enabled map[14]: type 4, range 32, base 000003f4, size 2, enabled map[18]: type 4, range 32, base 00000170, size 3, enabled map[1c]: type 4, range 32, base 00000374, size 2, enabled map[20]: type 4, range 32, base 00001860, size 4, enabled map[24]: type 1, range 32, base e0100000, size 10, memory disabled found-> vendor=0x8086, dev=0x248a, revid=0x02 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 00001880, size 5, enabled found-> vendor=0x8086, dev=0x2483, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 map[10]: type 4, range 32, base 00001c00, size 8, port disabled map[14]: type 4, range 32, base 000018c0, size 6, enabled found-> vendor=0x8086, dev=0x2485, revid=0x02 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 map[10]: type 4, range 32, base 00002400, size 8, port disabled map[14]: type 4, range 32, base 00002000, size 7, enabled found-> vendor=0x8086, dev=0x2486, revid=0x02 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 agp0: <Intel 82830 (i830M GMCH) SVGA controller> mem 0xe0000000-0xe007ffff,0xe8000000-0xefffffff irq 9 at device 2.0 on pci0 agp0: detected 892k stolen memory agp0: aperture size is 128M pci0: <display> at device 2.1 (no driver attached) uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 9 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 9 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f at device 29.2 on pci0 pcib0: matched entry for 0.29.INTC (source \_SB_.LNKC) pcib0: possible interrupts: 9 pcib0: slot 29 INTC routed to irq 9 via \_SB_.LNKC usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered umass0: Sony USB Memory Stick Slot, rev 1.10/1.09, addr 2 umass0:0:0:-1: Attached to scbus0 as device 0 pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib1: secondary bus 2 pcib1: subordinate bus 2 pcib1: I/O decode 0x3000-0x3fff pcib1: memory decode 0xe0200000-0xe02fffff pcib1: prefetched decode 0xfff00000-0xfffff ---- initial configuration ------------------------ \_SB_.LNKC irq 9: [ 9] low,level,sharable 2.2.0 \_SB_.LNKE irq 9: [ 9] low,level,sharable 2.8.0 \_SB_.LNKD irq 9: [ 9] low,level,sharable 2.11.0 \_SB_.LNKA irq 9: [ 9] low,level,sharable 2.11.1 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \_SB_.LNKC irq 9: [ 9] low,level,sharable 2.2.0 \_SB_.LNKE irq 9: [ 9] low,level,sharable 2.8.0 \_SB_.LNKD irq 9: [ 9] low,level,sharable 2.11.0 \_SB_.LNKA irq 9: [ 9] low,level,sharable 2.11.1 pci2: <ACPI PCI bus> on pcib1 pci2: physical bus=2 map[10]: type 1, range 32, base e0205000, size 11, enabled map[14]: type 1, range 32, base e0200000, size 14, enabled found-> vendor=0x104c, dev=0x8023, revid=0x00 bus=2, slot=2, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x1180, dev=0x0475, revid=0x80 bus=2, slot=5, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e0204000, size 12, enabled map[14]: type 4, range 32, base 00003000, size 6, enabled found-> vendor=0x8086, dev=0x1031, revid=0x42 bus=2, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x104c, dev=0xac50, revid=0x01 bus=2, slot=11, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns) intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 XXXfw: vendid=104c, dev=8023 fwohci0: <1394 Open Host Controller Interface> mem 0xe0200000-0xe0203fff,0xe0205000-0xe02057ff at device 2.0 on pci2 fwohci0: Invalid irq 255 fwohci0: Please switch PNP-OS to 'No' in BIOS device_probe_and_attach: fwohci0 attach returned 6 cbb0: <RF5C475 PCI-CardBus Bridge> irq 3 at device 5.0 on pci2 pcib1: device cbb0 requested decoded memory range 0xe0200000-0xe02fffff cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 fxp0: <Intel Pro/100 Ethernet> port 0x3000-0x303f mem 0xe0204000-0xe0204fff irq 9 at device 8.0 on pci2 pcib1: device fxp0 requested decoded memory range 0xe0204000-0xe0204fff fxp0: using memory space register mapping fxp0: Ethernet address 08:00:46:4e:96:17 fxp0: PCI IDs: 8086 1031 104d 8100 0042 fxp0: Dynamic Standby mode is disabled inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: fxp0 attached cbb1: <TI1410 PCI-CardBus Bridge> at device 11.0 on pci2 pcib1: device cbb1 requested decoded memory range 0xe0200000-0xe02fffff cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib1: matched entry for 2.11.INTA (source \_SB_.LNKD) pcib1: slot 11 INTA is routed to irq 9 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xe0100000-0xe01003ff at device 31.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1860 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1868 ata1: mask=03 ostat0=00 ostat2=00 ata1-master: ATAPI 00 00 ata1-slave: ATAPI 00 00 ata1: mask=03 stat0=00 stat1=00 ata1: devices=00 ata1: at 0x170 irq 15 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <multimedia, audio> at device 31.5 (no driver attached) pci0: <simple comms> at device 31.6 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000 psm0: unable to allocate IRQ acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0 sio0: irq maps: 0x201 0x211 0x201 0x201 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A, console unknown: not probed (disabled) unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 acpi_cmbat0: <Control method Battery> on acpi0 acpi_acad0: <AC adapter> on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xd8000-0xdbfff,0xc0000-0xcffff on isa0 pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1 failed to probe at port 0x3e2 iomem 0xd4000 irq 11 on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0 failed to probe on isa0 isa_probe_children: probing PnP devices BIOS Geometries: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. procfs registered Timecounters tick every 10.000 msec bpf: lo0 attached acpi_cpu0: set speed to 100.0% acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5% acpi_acad0: On Line g_do_event(0xc12f6200) 3 m:0 g:0 p:0 c:0 - g_post_event(1, 0, 0, 0xc4668780, 0) g_do_event(0xc45b1e80) 1 m:0 g:0 p:0xc4668780 c:0 - EV_NEW_PROVIDER(geom.ctl) dev_taste(DEV,geom.ctl) g_mbrext_taste(MBREXT,geom.ctl) mbr_taste(MBR,geom.ctl) panic: mutex Giant not owned at /current/usr/src/sys/vm/vm_map.c:384 Debugger("panic") Stopped at Debugger+0x54: xchgl %ebx,in_Debugger.0 db> tr Debugger(c035289f,c03c1880,c0351bb8,d7196bd8,1) at Debugger+0x54 panic(c0351bb8,c0351d22,c03659e4,180,0) at panic+0xab _mtx_assert(c0387600,1,c03659e4,180,c1306750) at _mtx_assert+0xbc _vm_map_lock_read(c053c000,c03659e4,85c,31eeeed,c03875a0) at _vm_map_lock_read+0x36 vm_map_check_protection(c053c000,d7196000,d7197000,3,d7196cb0) at vm_map_check_protection+0x31 kernacc(d7196cb0,4,3,d7196cb0,d7196c94) at kernacc+0x5c mtx_validate(d7196cb0,c031e753,c12f5500,1,d7196cb0) at mtx_validate+0x2d mtx_init(d7196cb0,c034e16b,0,0,0) at mtx_init+0x48 g_up_procbody(0,d7196d48,c034ff9a,354,0) at g_up_procbody+0x45 fork_exit(c01cb900,0,d7196d48) at fork_exit+0xa5 fork_trampoline() at fork_trampoline+0x1a --- trap 0x1, eip = 0, esp = 0xd7196d7c, ebp = 0 --- db> ps pid proc addr uid ppid pgrp flag stat wmesg wchan cmd 36 c4530540 d86e1000 0 0 0 0000204 new [IWAIT] irq8: rtc 35 c4530700 d86e2000 0 0 0 0000204 new [IWAIT] irq0: clk 34 c45308c0 d86e3000 0 0 0 0000204 norm[IWAIT] irq6: fdc0 33 c4530a80 d86e4000 0 0 0 0000204 norm[IWAIT] irq7: ppc0 32 c4530c40 d86e5000 0 0 0 0000204 new [IWAIT] irq4: sio0 31 c4530e00 d86e6000 0 0 0 0000204 new [IWAIT] swi0: tty:sio 30 c459c000 e0770000 0 0 0 0000204 norm[IWAIT] irq1: atkbd0 29 c459c1c0 e0771000 0 0 0 0000204 new [IWAIT] irq15: ata1 28 c459c380 e0772000 0 0 0 0000204 norm[IWAIT] irq14: ata0 6 c459c540 e0773000 0 0 0 0000204 new [RUNQ] cbb1 5 c459c700 e0774000 0 0 0 0000204 new [RUNQ] cbb0 27 c459c8c0 e0775000 0 0 0 0000204 new [IWAIT] irq3: cbb0 26 c130a1c0 d71dc000 0 0 0 0000204 new [RUNQ] usb2 25 c130a380 d71dd000 0 0 0 0000204 new [RUNQ] usb1 24 c130a540 d71de000 0 0 0 0000204 new [RUNQ] usbtask 23 c130a700 d71df000 0 0 0 0000204 new [RUNQ] usb0 22 c130a8c0 d71e0000 0 0 0 0000204 new [RUNQ] acpi_thermal 21 c130aa80 d71e1000 0 0 0 0000204 norm[RUNQ] irq9: cbb1 fxp0++++ 20 c130ac40 d71e2000 0 0 0 0000204 new [IWAIT] irq13: 19 c130ae00 d71e3000 0 0 0 0000204 norm[IWAIT] swi5: acpitaskq 18 c4530000 d86a5000 0 0 0 0000204 new [IWAIT] swi3: cambio 17 c45301c0 d86a6000 0 0 0 0000204 new [IWAIT] swi2: camnet 16 c4530380 d86a7000 0 0 0 0000204 new [IWAIT] swi5: task queue 15 c1303000 d7160000 0 0 0 0000204 new [RUNQ] random 4 c13031c0 d71d3000 0 0 0 0000204 new [RUNQ] g_down 3 c1303380 d71d4000 0 0 0 0000204 norm[CPU 0] g_up 2 c1303540 d71d5000 0 0 0 0000204 norm[SLPQ ggetattr c4668500][SLP] g_event 14 c1303700 d71d6000 0 0 0 0000204 new [IWAIT] swi1: net 13 c13038c0 d71d7000 0 0 0 0000204 new [IWAIT] swi4: vm 12 c1303a80 d71d8000 0 0 0 000020c norm[RUNQ] swi6: tty:sio clock 11 c1303c40 d71d9000 0 0 0 000020c norm[Can run] idle 1 c1303e00 d71da000 0 0 0 0000200 newpanic: unknown thread state Uptime: 1s Terminate ACPI cbb0: Unsupported card type detected cbb1: Unsupported card type detected Automatic reboot in 15 seconds - press a key on the console to abort Rebooting... ---------------------------------------------------------------------------- The bad things I notice here before the panic are: 1. Firewire sees IRQ 255; pnp bios setting has no effect. I suspect that fixing this requires acpi to get more aggressive. 2. All of the useful routed IRQs go to IRQ 9. This shouldn't be serious but may cause some inefficiency in network operation. IRQ 10 and 11 don't appear to get used at all. 3. psm0: unable to map IRQ (but nothing else maps to 12) 4. GEOM panics. 5. the wireless isn't detected; we probably need to add to the mfr/card table to fix that (the "cbb1: unsupported card type detected"). May need to add those numbers to the message :-) (note that cbb0 doesn't have a card inserted so should be unsupported; the message could be better). 6. The messages from "Uptime: 1s" on come out spontaneously after the ps output along with the reboot; something is fubar in either kdb or one of the proc structs that is confusing kdb. Also newpanic: is ending up in init's slot (probably doesn't matter at this stage). The message about "PCI-only interrupts: none" is probably lying; this wireless won't map to ISA (per Warner). IRQ9 is always in RUNQ state whenever I look. With 5 or 6 devices attached it isn't a big surprise but this may cause problems. With ACPI renamed it panics fairly early in PNP processing with a page-not-present trap 12. I haven't bothered to capture this since this laptop seems to require ACPI anyhow for full operation. -- Pete To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200210191930.g9JJUCjC049216>