Date: Thu, 24 Oct 2002 20:59:24 +0100 (BST) From: Douglas Hall <doug@fearless.org> To: freebsd-mobile@freebsd.org Subject: kernel panic with PNPBIOS on Sony Vaio Message-ID: <20021024113317.E7133-100000@warthog.fearless.org>
next in thread | raw e-mail | index | archive | help
I have successfully managed to install FreeBSD 4.7-RELEASE (I am currently using RELENG_4_7) on a Sony VAIO GRX416G. However the sound is not working, although the pcm0 device is recognised on boot. The error received in the console is this 'Pcm0:play:0:play interrupt timeout, channel dead' A quick perusal of the mailing list archives suggests that setting the BIOS to disable PNP OS would help. Unfortunately the bios in this laptop does not have that feature. Other suggestions were to do 'options PNPBIOS' in the kernel config, this however causes the system to panic with a 'Fatal Trap 9 - General Protection Fault' on boot. I tried turning on more logging in /boot/loader.conf, and this showed a couple of pages of PNP related output before the panic occured, ending with: -- pnpbios: handle 14 device ID PNP0c02 (020cd041) Fatal trap 9: general protection fault while in kernel mode instruction pointer = 0x58:0x8d1b stack pointer = 0x10:0xeb8 frame pointer = 0x10:0xf0e code segment = base 0xc00f0000, limit 0xffff, type 0x1b = DPL 0, pres 1, def 32 0, gran 0 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (swapper) interrupt mask = net tty bio cam trap number = 9 panic: general protection fault uptime: 0s -- This can be reproduced by adding 'options PNPBIOS' to the GENERIC config with 4.7. It makes no difference whether 'device pcm' is added. I have tried stripping out all non essential config statements, including all SCSI and USB options, but with the same result. Also to experiment, i tried the freebsd-stable kernel with the same variation of kernel configs, and also the freebsd-current kernel with the default option. Each time the system panics. Is there anything else I should try at this point, besides a new laptop :) -Douglas Include copy of dmesg output: avail memory = 517918720 (505780K bytes) Preloaded elf kernel "kernel" at 0xc03ce000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc03ce09c. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 7 entries at 0xc00fdf50 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82845 Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <ATI model 4c57 graphics accelerator> at 0.0 irq 9 uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 9 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 9 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f at device 29.2 on pci0 pci_cfgintr_search: linked (0) to configured irq 9 at 0:29:1 pci_cfgintr: 0:29 INTC routed to irq 9 usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered umass0: Sony USB Memory Stick Slot, rev 1.10/1.09, addr 2 pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 pcic0: <Ricoh RL5C476 PCI-CardBus Bridge> irq 3 at device 5.0 on pci2 pcic0: PCI Memory allocated: 0x88000000 pccard0: <PC Card 16-bit bus (classic)> on pcic0 pci_cfgintr_search: linked (0) to configured irq 9 at 2:8:0 pci_cfgintr: 2:5 INTB routed to irq 9 pcic1: <Ricoh RL5C476 PCI-CardBus Bridge> irq 9 at device 5.1 on pci2 pcic1: PCI Memory allocated: 0x88001000 pccard1: <PC Card 16-bit bus (classic)> on pcic1 pci2: <unknown card> (vendor=0x1180, dev=0x0552) at 5.2 fxp0: <Intel Pro/100 Ethernet> port 0x4000-0x403f mem 0xe8200000-0xe8200fff irq 9 at device 8.0 on pci2 fxp0: Ethernet address 08:00:46:67:a2:b1 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 pcm0: <Intel 82801CA (ICH3)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 9 at device 31.5 on pci0 pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6 eisa0: <EISA bus> on motherboard eisa0: unknown card @@D0000 (0x00040000) at slot 1 orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd8000-0xdbfff,0xdc000-0xdffff on isa0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad0: 28615MB <TOSHIBA MK3018GAS> [58140/16/63] at ata0-master UDMA100 acd0: CD-RW <SONY CD-RW/DVD-ROM CRX810E> at ata1-master PIO4 pccard: card inserted, slot 0 umass0: CBI reset failed, TIMEOUT umass0: CBI bulk-in stall clear failed, TIMEOUT umass0: CBI bulk-out stall clear failed, TIMEOUT umass0: CBI reset failed, TIMEOUT umass0: CBI bulk-in stall clear failed, TIMEOUT umass0: CBI bulk-out stall clear failed, TIMEOUT umass0: CBI reset failed, TIMEOUT umass0: CBI bulk-in stall clear failed, TIMEOUT umass0: CBI bulk-out stall clear failed, TIMEOUT umass0: CBI reset failed, TIMEOUT umass0: CBI bulk-in stall clear failed, TIMEOUT umass0: CBI bulk-out stall clear failed, TIMEOUT umass0: CBI reset failed, TIMEOUT umass0: CBI bulk-in stall clear failed, TIMEOUT umass0: CBI bulk-out stall clear failed, TIMEOUT Mounting root from ufs:/dev/ad0s2a logo_saver: no suitable graphics mode module_register_init: MOD_LOAD (logo_saver, c1fcea44, 0) error 19 wi0 at port 0x240-0x27f irq 3 slot 0 on pccard0 wi0: 802.11 address: 00:04:e2:08:15:31 wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A wi0: Intersil Firmware: Primary 0.03.00, Station 0.08.03 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021024113317.E7133-100000>