Date: Mon, 2 Dec 2002 09:29:38 +0200 (EET) From: Jarkko Santala <jake@iki.fi> To: Setient <setient@reva.sixgirls.org> Cc: Falko Meyer <wds_de@yahoo.de>, <freebsd-alpha@freebsd.org> Subject: Re: 433 au Message-ID: <20021202092405.I33855-100000@trillian.santala.org> In-Reply-To: <Pine.NEB.4.44.0212011909040.24638-100000@reva.sixgirls.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 1 Dec 2002, Setient wrote: > it has a terminator on the cable that isn't the problem it has macos > partitions on it and it don't like reading the size therefore reporting > it has no disk which is completely bogus i need a way to lowlevel format > it from srm or something. No, do as he told below. Boot from a floppy and issue a command like this: dd if=/dev/zero of=/dev/foo foo begin the harddrive device. You can also specify bs and count if you like or just let that run for a few seconds. Then reboot with your preferred installation media. What that does is clears the partitions and whatever you have on the beginning of the disk, forcing size and all other things to be detected properly. I think I used a NetBSD floppy to do this a while ago, because I couldn't do it from a FreeBSD one or something. A bootable installation CD probably works OK too if you have around. -jake > On Fri, 29 Nov 2002, Falko Meyer wrote: > > > Date: Fri, 29 Nov 2002 12:59:55 +0100 > > From: Falko Meyer <wds_de@yahoo.de> > > To: Setient <setient@reva.sixgirls.org>, freebsd-alpha@freebsd.org > > Subject: Re: 433 au > > > > Setient wrote: > > > > > > i have a scsi disk a 36 gig 10k rpm seagate cheetah it was formerly in a > > > mac running mac linux. I try to put it in the freebsd machine then boot > > > off cdrom but alas it comes up with unable to determin hd size then i > > > can't go further cause it says there is no harddisk present. is there a > > > way i can get rid of the information that is on the hd without a mac? > > Boot a Linux Bootdisk (i usually take Slackware Boot- and Rootdisks) and > > run dd or do a lowlevel format which should be provided by the > > hostadapter's BIOS (on a PC). Maybe there is also a way using > > BSD-Bootdisks. > > > > MfG > > Falko Meyer > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-alpha" in the body of the message > -- Jarkko Santala <jake@iki.fi> http://www.iki.fi/~jake/ System Administrator 2001:670:83:f08::/64 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021202092405.I33855-100000>