Date: Tue, 12 Aug 2003 12:20:25 -0700 (PDT) From: Jamie Bowden <ragnar@sysabend.org> To: mobile@FreeBSD.org Subject: Wierd X issue. Message-ID: <20030812115548.S15481-100000@moo.sysabend.org>
next in thread | raw e-mail | index | archive | help
I upgraded my laptop (Dell Latitude C810) to 5.1-R this morning (saved
data I cared about, did fresh install), and cvsup'd RELENG_5_1. After
buildworld, installworld, buildkernel, installkernel, and a reboot I built
the XFree86-4 port. I've also installed the linux_base posrt and the
NVIDIA FreeBSD driver dated July 1, 2003, which is the newest on their
site.
My problem is that X can't grab the keyboard. X comes up just fine, but
anything I type doesn't echo in the focused window (xterm for test
purposes), and upon exiting I get random garbage dumped to my command
line. This doesn't happen on my desktop, only my laptop. This happens
both in the dock and out of it. With this exception, everything else
appears to be working fine (except the:
ACPI-0293: *** Warning: Buffer created with zero length in AML
-0166: *** Error: UtAllocate: Attempt to allocate zero bytes
issue, which I'll patch later).
Right now, I'd just like to know if anyone else has seen this problem, and
what was necessary to solve it. I'll paste the dmesg output (without the
zillion AML errors below).
from dmesg (in a C/PortII):
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE-p2 #0: Tue Aug 12 10:54:05 EDT 2003
jamie@ghast:/usr/obj/usr/src/sys/ghast
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0764000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc07641cc.
Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc0764278.
Preloaded elf module "/boot/kernel/snd_maestro3.ko" at 0xc0764324.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07643d8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1129573170 Hz
CPU: Intel(R) Pentium(R) III Mobile CPU 1133MHz (1129.57-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536780800 (511 MB)
avail memory = 513400832 (489 MB)
Pentium Pro MTRR support enabled
VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc04a6de2 (1000022)
VESA: NVidia
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL CPi R > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00fbc20
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_tz0: <thermal zone> port 0x530-0x537 on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce2 Go> mem 0xe0000000-0xe7ffffff,0xfc000000-0xfcffffff irq 11 at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcm0: <ESS Technology Maestro3> port 0xec00-0xecff mem 0xf8ffe000-0xf8ffffff irq 5 at device 3.0 on pci2
pcm0: <SigmaTel STAC9721/23 AC97 Codec>
xl0: <3Com 3c556 Fast Etherlink XL> port 0xe800-0xe8ff mem 0xf8ffd800-0xf8ffd87f,0xf8ffdc00-0xf8ffdc7f irq 10 at device 6.0 on pci2
xl0: Ethernet address: 00:04:76:4c:0d:94
miibus0: <MII bus> on xl0
tdkphy0: <TDK 78Q2120 media interface> on miibus0
tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <simple comms> at device 6.1 (no driver attached)
xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xe080-0xe0ff mem 0xf8ffcc00-0xf8ffcc7f irq 3 at device 8.0 on pci2
xl1: Ethernet address: 00:06:5b:d0:0d:6e
miibus1: <MII bus> on xl1
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0: <TI4451 PCI-CardBus Bridge> at device 15.0 on pci2
start (30000000) < sc->membase (f4000000)
end (ffffffff) > sc->memlimit (fbffffff)
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib2: slot 15 INTA is routed to irq 10
cbb1: <TI4451 PCI-CardBus Bridge> at device 15.1 on pci2
start (30000000) < sc->membase (f4000000)
end (ffffffff) > sc->memlimit (fbffffff)
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib2: slot 15 INTA is routed to irq 10
fwohci0: <Texas Instruments PCI4451> mem 0xf8ff8000-0xf8ffbfff,0xf8ffc000-0xf8ffc7ff irq 10 at device 15.2 on pci2
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 42:4f:c0:00:14:8b:94:21
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
if_fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 42:4f:c0:8b:94:21
sbp0: <SBP2/SCSI over firewire> on firewire0
fwohci0: Initiate bus reset
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0xbfa0-0xbfaf at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xdce0-0xdcff irq 10 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB Mouse, rev 1.10/6.20, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
speaker0 port 0x67,0x65,0x63,0x61 on acpi0
orm0: <Option ROMs> at iomem 0xcf800-0xcffff,0xcf000-0xcf7ff,0xce800-0xcefff,0xce000-0xce7ff,0xc0000-0xcdfff on isa0
pmtimer0 on isa0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <8 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
fwohci0: BUS reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad0: 28615MB <IC25N030ATDA04-0> [58140/16/63] at ata0-master UDMA100
acd0: CD-RW <Samsung CD-RW/DVD-ROM SN-308B> at ata0-slave WDMA2
Mounting root from ufs:/dev/ad0s2a
---------------------------------------------------------------
>From X when starting:
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: FreeBSD 5.1 i386 [ELF]
Build Date: 12 August 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Aug 12 14:15:55 2003
(==) Using config file: "/etc/X11/XF86Config"
Symbol __glXActiveScreens from module /usr/X11R6/lib/modules/extensions/libdri.a is unresolved!
Symbol __glXActiveScreens from module /usr/X11R6/lib/modules/extensions/libdri.a is unresolved!
(II) [GLX]: Initializing GLX extension
This is xbattbar version 1.4.2, copyright (c)1998-2001 Suguru Yamaguchi
waiting for X server to shut down xterm: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0"
xterm: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0"
xterm: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0"
xterm: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0"
xterm: fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0"
----------------------------------------------------------------
The XF86Config file:
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "extmod"
Load "dri"
Load "glx"
Load "dbe"
Load "record"
Load "xtrap"
Load "speedo"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/sysmouse"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "DigitalVibrance" # <i>
#Option "PageFlip" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "NoLogo" # [<bool>]
#Option "Overlay" # [<bool>]
#Option "UBB" # [<bool>]
#Option "Stereo" # <i>
#Option "WindowFlip" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "VideoKey" # <i>
#Option "NvAGP" # <i>
#Option "PixmapCacheLines" # <i>
#Option "IgnoreEDID" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ConnectedMonitor" # <str>
#Option "ConnectedMonitors" # <str>
#Option "TVStandard" # <str>
#Option "TVOutFormat" # <str>
#Option "NoRenderAccel" # [<bool>]
#Option "CursorShadow" # [<bool>]
#Option "CursorShadowAlpha" # <i>
#Option "CursorShadowXOffset" # <i>
#Option "CursorShadowYOffset" # <i>
#Option "UseEdidFreqs" # [<bool>]
#Option "FlatPanelProperties" # <str>
#Option "TwinView" # [<bool>]
#Option "TwinViewOrientation" # <str>
#Option "SecondMonitorHorizSync" # <str>
#Option "SecondMonitorVertRefresh" # <str>
#Option "MetaModes" # <str>
#Option "UseInt10Module" # [<bool>]
#Option "SwapReady" # [<bool>]
#Option "NoTwinViewXineramaInfo" # [<bool>]
#Option "NoRenderExtension" # [<bool>]
#Option "UseClipIDs" # [<bool>]
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV11 [GeForce2 Go]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200"
EndSubSection
EndSection
--------------------------------------------------------------
And the kernel config file:
machine i386
ident ghast
maxusers 0
options INCLUDE_CONFIG_FILE # Include this file in kernel
cpu I686_CPU # aka Pentium Pro(tm)
options COMPAT_43
options SCHED_4BSD
options COMPAT_FREEBSD4
options _KPOSIX_PRIORITY_SCHEDULING
options SYSVSHM # include support for shared memory
options SYSVSEM # include support for semaphores
options SYSVMSG # include support for message queues
options INET #Internet communications protocols
options INET6 #IPv6 communications protocols
options IPSEC #IP security
options IPSEC_ESP #IP security (crypto; define w/ IPSEC)
options IPSEC_DEBUG #debug for IP security
device ether #Generic Ethernet
device loop #Network loopback device
device wlan #802.11 support
device ppp #Point-to-point protocol
device bpf #Berkeley packet filter
device gif #IPv6 and IPv4 tunneling
device faith #for IPv6 and IPv4 translation
device stf #6to4 IPv6 over IPv4 encapsulation
device tun
options PPP_BSDCOMP #PPP BSD-compress support
options PPP_DEFLATE #PPP zlib/deflate/gzip support
options PPP_FILTER #enable bpf filtering (needs bpf)
options MROUTING # Multicast routing
options FFS #Fast filesystem
options SOFTUPDATES
device random
device scbus #base SCSI code
device da #SCSI direct access devices (aka disks)
device sa #SCSI tapes
device cd #SCSI CD-ROMs
device pass #SCSI passthrough driver
device pt #SCSI processor type
options SCSI_DELAY=8000 # Be pessimistic about Joe SCSI device
device pty #Pseudo ttys
device speaker #Play IBM BASIC-style noises out your speaker
device isa
device atkbdc
device atkbd
device psm
device vga
device agp
options VESA
device splash
device sc
options MAXCONS=8 # number of virtual consoles
options SC_PIXEL_MODE # add support for the raster text mode
device npx
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
device fdc
device sio
device apm
device pmtimer
device joy
device pci
device xl
device miibus
device pcm
device midi
device seq
device cbb
device pccard
device cardbus
device ppc
device ppbus
device lpt
device vpo
device firewire # Firewire bus code
device sbp # SCSI over Firewire (Requires scbus and da)
device fwe # Ethernet over Firewire (non-standard!)
device uhci
device ohci
device ehci
device usb
device ugen
device uhid
device ukbd
device ulpt
device umass
device ums
-----------------------------------------------------------------------------
Does anyone see any problems with my setup (other than the obvious 'It
doesn't work')?
Jamie Bowden
--
"It was half way to Rivendell when the drugs began to take hold"
Hunter S Tolkien "Fear and Loathing in Barad Dur"
Iain Bowen <alaric@alaric.org.uk>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030812115548.S15481-100000>