Date: Mon, 15 Sep 2003 10:54:09 +0100 From: Ian Morrison <ian@darq.net> To: scsi@freebsd.org Subject: IBM ServeRaid-3 on FreeBSD 5.1 (release & current) Message-ID: <20030915095409.GA26587@phear.darq.net>
next in thread | raw e-mail | index | archive | help
hiya, i posted this on current@ last week, but haven't heard anything back. i'm reposting it here in the hope that someone might be able to shine some light on the problem.. i've just got hold of an IBM Netfinity 4000R system (8653-45Y) which uses an IBM ServeRaid-3L to control two 9 gig disks. Drives are set up as a standard mirror, and online. Booting from 5.1-RELEASE and the latest snapshot i could find both result in a kernel panic on boot. i've included the dmesg for both kernels below, and would be grateful if anyone could offer any advice. many thanks, ian Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT-20030908-JPSNAP #0: Mon Sep 8 03:26:52 GMT 2003 root@ushi.jp.freebsd.org:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b41000. Preloaded mfs_root "/boot/mfsroot" at 0xc0b41200. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (745.00-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x681 Stepping =3D 1 Features=3D0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory =3D 1073741824 (1024 MB) avail memory =3D 1031286784 (983 MB) Pentium Pro MTRR support enabled md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0707670 npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 pcib0: <Intel 82443GX host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82443GX host to PCI bridge> mem 0xf0000000-0xf3ffffff at devic= e 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0xffa0-0xffaf at device 7.1 o= n pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x3000-0x301f at devi= ce 7.2 on pci0 uhci0: Could not allocate irq device_probe_and_attach: uhci0 attach returned 6 pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) fxp0: <Intel 82559 Pro/100 Ethernet> port 0x3040-0x307f mem 0xfea00000-0xfe= afffff,0xfebff000-0xfebfffff irq 10 at device 17.0 on pci0 fxp0: Disabling dynamic standby mode in EEPROM fxp0: New EEPROM ID: 0x4080 fxp0: EEPROM checksum @ 0x3f: 0xd29 -> 0xd29 fxp0: Ethernet address 00:06:29:de:b9:ac miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: <Intel 82559 Pro/100 Ethernet> port 0x3080-0x30bf mem 0xfe900000-0xfe= 9fffff,0xfebfe000-0xfebfefff irq 11 at device 18.0 on pci0 fxp1: Disabling dynamic standby mode in EEPROM fxp1: New EEPROM ID: 0x4080 fxp1: EEPROM checksum @ 0x3f: 0xe29 -> 0xe29 fxp1: Ethernet address 00:06:29:de:b9:ab miibus1: <MII bus> on fxp1 inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib2: <PCI-PCI bridge> at device 20.0 on pci0 pci2: <PCI bus> on pcib2 ips0: <IBM ServeRAID Adapter> port 0x2000-0x20ff mem 0xfe000000-0xfe0fffff = irq 9 at device 15.0 on pci2 ips0: reinitializing adapter, this could take several minutes. ips0: logical drives: 222 ipsd0: <Logical Drive> on ips0 GEOM: create disk ipsd0 dp=3D0xc6588b90 ipsd0: Logical Drive (1824184MB) ipsd1: <Logical Drive> on ips0 GEOM: create disk ipsd1 dp=3D0xc6588a90 ipsd1: Logical Drive (1824184MB) ipsd2: <Logical Drive> on ips0 GEOM: create disk ipsd2 dp=3D0xc6588990 ipsd2: Logical Drive (1824184MB) ipsd3: <Logical Drive> on ips0 GEOM: create disk ipsd3 dp=3D0xc6588890 ipsd3: Logical Drive (1824184MB) ipsd4: <Logical Drive> on ips0 GEOM: create disk ipsd4 dp=3D0xc6588790 Memory modified after free 0xc65aa080(124) panic: Most recently used by none Debugger("panic") Stopped at Debugger+0x54: xchgl %ebx,in_Debugger.0 db> reset =00=00=00=00=80=80=00=80=80=80=00=00=00=00=F8=F8=80=00=FE=F8=80=80=00=98=00= =E6=00=F8DS=00=00=00Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-RELEASE #0: Thu Jun 5 02:55:42 GMT 2003 root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ac1000. Preloaded mfs_root "/boot/mfsroot" at 0xc0ac1200. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 744995420 Hz CPU: Intel Pentium III (745.00-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x681 Stepping =3D 1 Features=3D0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory =3D 1073741824 (1024 MB) avail memory =3D 1031827456 (984 MB) Pentium Pro MTRR support enabled md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc06877a4 npx0: <math processor> on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 pcib0: <Intel 82443GX host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82443GX host to PCI bridge> mem 0xf0000000-0xf3ffffff at devic= e 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0xffa0-0xffaf at device 7.1 o= n pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x3000-0x301f at devi= ce 7.2 on pci0 uhci0: Could not allocate irq device_probe_and_attach: uhci0 attach returned 6 pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x3040-0x307f= mem 0xfea00000-0xfeafffff,0xfebff000-0xfebfffff irq 10 at device 17.0 on p= ci0 fxp0: Disabling dynamic standby mode in EEPROM fxp0: New EEPROM ID: 0x4080 fxp0: EEPROM checksum @ 0x3f: 0xd29 -> 0xd29 fxp0: Ethernet address 00:06:29:de:b9:ac miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x3080-0x30bf= mem 0xfe900000-0xfe9fffff,0xfebfe000-0xfebfefff irq 11 at device 18.0 on p= ci0 fxp1: Disabling dynamic standby mode in EEPROM fxp1: New EEPROM ID: 0x4080 fxp1: EEPROM checksum @ 0x3f: 0xe29 -> 0xe29 fxp1: Ethernet address 00:06:29:de:b9:ab miibus1: <MII bus> on fxp1 inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib2: <PCI-PCI bridge> at device 20.0 on pci0 pci2: <PCI bus> on pcib2 ips0: <IBM ServeRAID Adapter> port 0x2000-0x20ff mem 0xfe000000-0xfe0fffff = irq 9 at device 15.0 on pci2 ips0: reinitializing adapter, this could take several minutes. ips0: logical drives: 0 Fatal trap 12: page fault while in kernel mode fault virtual address =3D 0xffddc399 fault code =3D supervisor read, page not present instruction pointer =3D 0x8:0xc031ce94 stack pointer =3D 0x10:0xc0ae3c14 frame pointer =3D 0x10:0xc0ae3c24 code segment =3D base 0x0, limit 0xfffff, type 0x1b =3D DPL 0, pres 1, def32 1, gran 1 processor eflags =3D interrupt enabled, resume, IOPL =3D 0 current process =3D 0 (swapper) trap number =3D 12 panic: page fault Uptime: 1s Automatic reboot in 15 seconds - press a key on the console to abort --> Press a key on the console to reboot, --> or switch off the system now. -- :: darq.net /#/ :: such swoopy interwords | mnemonica
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030915095409.GA26587>