Date: Sat, 4 Oct 2003 21:51:46 +0200 From: Eric Dillenseger <eric@naxalite.ath.cx> To: freebsd-mozilla@freebsd.org Subject: Moz 1.3 on FreeBSD 5.1 Huge fonts Message-ID: <20031004195146.GB8346@tweety.naxalite.org>
next in thread | raw e-mail | index | archive | help
--sdtB3X0nJg68CQEu Content-Type: text/plain; charset="iso-8859-15:utf-8" Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi. I've setup a box running FreeBSD 5.1, installed some apps and mozilla 1.3 from /usr/ports/www/mozilla It ran well, so I downloaded the correct (yes, sure) language pack from mozilla.org (franch language pack) and installed it as root. Next time I ran moz, Every test were huge (web pages, menu, dialog box) I removed the package, built and installed it again (quite long), no changes. I haven't made many changes at this point, just build a GENERIC kernel added NVidia drivers. I've seen some hints on google about X fonts (put 75dpi at the top of the list in XF86Config) and such, but none helped. When I commented 75dpi and 100dpi, It felt to some other fonts but still too big to be usable. Has someone any hints? dmesg: ------ Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-RELEASE #0: Sat Oct 4 15:52:31 CEST 2003 root@nazgul.naxalite.org:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc090e000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc090e244. Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc090e2f0. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc090e39c. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 1540487552 Hz CPU: AMD Athlon(tm) XP 1800+ (1540.49-MHz 686-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x662 Stepping =3D 2 Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=3D0xc0480000<MP,AMIE,DSP,3DNow!> real memory =3D 1073676288 (1023 MB) avail memory =3D 1033424896 (985 MB) Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <GBT AWRDACPI> on motherboard pcibios: BIOS version 2.10 Using $PIR table, 9 entries at 0xc00fcb00 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <VIA Generic host to PCI bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 nvidia0: <GeForce4 Ti 4200> mem 0xe0000000-0xe007ffff,0xd8000000-0xdfffffff,0xe8000000-0xe8ffffff irq 11 at device 0.0 on pci1 pcm0: <Creative EMU10K1> port 0xd000-0xd01f irq 10 at device 10.0 on pci0 pcm0: <SigmaTel STAC9708/11 AC97 Codec> ahc0: <Adaptec aic7860 Ultra SCSI adapter> port 0xd800-0xd8ff mem 0xea000000-0xea000fff irq 11 at device 13.0 on pci0 aic7860: Ultra Single Channel A, SCSI Id=3D7, 3/253 SCBs uhci0: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 11 at device 16.0 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ugen0: Canon CanoScan, rev 1.10/1.00, addr 2 uhci1: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 11 at device 16.1 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 10 at device 16.2 on pci0 usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 16.3 (no driver attached) isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8235 UDMA133 controller> port 0xe800-0xe80f at device 17.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 rl0: <RealTek 8139 10/100BaseTX> port 0xec00-0xecff mem 0xea002000-0xea0020ff irq 10 at device 19.0 on pci0 rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode rl0: Ethernet address: 00:20:ed:6a:3e:44 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse Explorer, device ID 4 pmtimer0 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0% ad0: 78533MB <IC35L090AVV207-0> [159560/16/63] at ata0-master UDMA100 acd0: DVD-ROM <Memorex DVD-MAXX 1648 AJ> at ata1-master PIO4 Waiting 15 seconds for SCSI devices to settle Mounting root from ufs:/dev/ad0s1a cd0 at ahc0 bus 0 target 3 lun 0 cd0: <YAMAHA CRW-F1S 1.0c> Removable CD-ROM SCSI-2 device=20 cd0: 20.000MB/s transfers (20.000MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed ahc0: PCI error Interrupt at seqaddr =3D 0x7 ahc0: Data Parity Error Detected during address or write data phase pid 39901 (fluxbox), uid 1000: exited on signal 4 XF86Config: ----------- Section "Module" Load "dbe" # Double buffer extension SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection Load "type1" Load "speedo" Load "freetype" Load "xtt" Load "glx" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/local/" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/TrueType/" FontPath "/usr/X11R6/lib/X11/fonts/freefont/" FontPath "/usr/X11R6/lib/X11/fonts/URW" ModulePath "/usr/X11R6/lib/modules" EndSection Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" Option "AutoRepeat" "500 30" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "fr" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "PS/2" Option "Device" "/dev/psm0" Option "Resolution" "256" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "My Monitor" HorizSync 31.5 - 64.3 VertRefresh 40-150 EndSection Section "Device" Identifier "NVIDIA" Driver "nvidia" EndSection Section "Screen" Identifier "Screen 1" Device "NVIDIA" Monitor "My Monitor" DefaultDepth 24 Subsection "Display" Depth 8 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection EndSection Section "ServerLayout" Identifier "Simple Layout" Screen "Screen 1" InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection --=20 > Enfin vivement les procs optique qui ne chaufferont pas trop ;-) Vivement les proc quantiques, en rajoutant un gla=E7on, on pourra m=EAme=20 les boire ... [ Eric Dillenseger GPG(OxFF352913) eric(at)naxalite(dot)ath(dot)cx ] --sdtB3X0nJg68CQEu Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.2 (OpenBSD) iD8DBQE/fyTSkZEoR/81KRMRAm8kAJ9d6JnPvigpfERDzQRZyhA/xdifhQCeKKAD KXL2jccJz4XOdLzLfRjf4yg= =VgBQ -----END PGP SIGNATURE----- --sdtB3X0nJg68CQEu--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031004195146.GB8346>