Date: Thu, 9 Oct 2003 17:48:06 +0100 From: Scott Mitchell <scott+freebsd@fishballoon.org> To: Alexey Koptsevich <kopts@astro.psu.edu> Cc: questions@freebsd.org Subject: Re: problem with aue card Message-ID: <20031009164806.GA27389@llama.fishballoon.org> In-Reply-To: <Pine.LNX.4.44.0310090246190.6645-100000@localhost.localdomain> References: <Pine.LNX.4.44.0310090246190.6645-100000@localhost.localdomain>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Oct 09, 2003 at 03:23:15AM -0400, Alexey Koptsevich wrote: > > Hi, > > I have a problem with the network card Linksys USB100TX. The hardware > itself is known to be working, but not under FreeBSD. > > Here is dmesg: > > Oct 8 21:10:39 pyosik kernel: aue0: LINKSYS Inc. LINKSYS USB Adapter, rev 1.10/1.01, addr 2 > Oct 8 21:10:40 pyosik kernel: aue0: Ethernet address: 00:e0:98:82:f3:e6 > Oct 8 21:10:40 pyosik kernel: miibus1: <MII bus> on aue0 > Oct 8 21:10:40 pyosik kernel: bmtphy0: <BCM5201 10/100baseTX PHY> on miibus1 > Oct 8 21:10:40 pyosik kernel: bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > After loading if_ep the interface appears in the output of ifconfig, but > Oct 8 21:18:17 pyosik kernel: aue0: MII read timed out > > When I then try 'dhclient aue0', I get thousands of messages > aue0: usb error on rx: IOERROR > > Any piece of advice how to make this card work would be appreciated. Are you on a 100Mbps network? Our driver seems to have issues with this device on such networks, although it seems to work fine on 10Mbps connections. Scott -- =========================================================================== Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels Cambridge, England | 0x54B171B9 | don't get sucked into jet engines" scott at fishballoon.org | 0xAA775B8B | -- Anon
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031009164806.GA27389>