Date: Fri, 5 Dec 2003 21:47:48 +0000 From: Ceri Davies <ceri@submonkey.net> To: current@FreeBSD.org Cc: sos@FreeBSD.org Subject: 5.2 unbootable on my hardware Message-ID: <20031205214748.GB413@submonkey.net>
next in thread | raw e-mail | index | archive | help
--GZVR6ND4mMseVXL/
Content-Type: multipart/mixed; boundary="uZ3hkaAS1mZxFaxD"
Content-Disposition: inline
--uZ3hkaAS1mZxFaxD
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
Apologies for the delay in reporting this, but I've had other
commitments which haven't allowed to me to sit down with this before
tonight.
Sometime between October 5th and November 4th an ATA change has made
current unbootable on my machine.
Verbose boot messages are attached for an October 5th kernel and one
=66rom today's checkout.
Any help I can offer is available - if a committer wants root access and
a serial console that can also be done.
Ceri
--=20
--uZ3hkaAS1mZxFaxD
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="boot.bad"
Content-Transfer-Encoding: quoted-printable
OK boot -v
/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=
=08|=08/=08-=08\=08|=08/=08/boot/kernel/acpi.ko text=3D0x3ef40 -=08\=08|=08=
/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08data=3D0x1724+0x114c -=
=08syms=3D[0x4+0x6260\=08|=08+0x4+0x8075/=08-=08]
\=08|=08/=08-=08\=08|=08/=08SMAP type=3D01 base=3D0000000000000000 len=3D00=
0000000009fc00
SMAP type=3D02 base=3D000000000009fc00 len=3D0000000000000400
SMAP type=3D02 base=3D00000000000f0000 len=3D0000000000010000
SMAP type=3D01 base=3D0000000000100000 len=3D000000001fef0000
SMAP type=3D03 base=3D000000001fff0000 len=3D0000000000008000
SMAP type=3D04 base=3D000000001fff8000 len=3D0000000000008000
SMAP type=3D02 base=3D00000000fec00000 len=3D0000000000001000
SMAP type=3D02 base=3D00000000fee00000 len=3D0000000000001000
SMAP type=3D02 base=3D00000000ffff0000 len=3D0000000000010000
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-BETA #12: Fri Dec 5 20:27:50 GMT 2003
setantae@rhadamanth.private.submonkey.net:/usr/obj/usr/src/sys/RHADAMAN=
TH
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0841000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0841250.
Calibrating clock(s) ... i8254 clock: 1193225 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 863680612 Hz
CPU: Intel Pentium III (863.68-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x686 Stepping =3D 6
Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory =3D 536805376 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c29000 - 0x000000001f6c9fff, 514461696 bytes (125601 pages)
avail memory =3D 511881216 (488 MB)
Table 'FACP' at 0x1fff0030
Table 'APIC' at 0x1fff00b0
MADT: Found table at 0x1fff00b0
MP Configuration Table version 1.1 found at 0xc00f5760
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
ACPI APIC Table: <AMIINT >
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
bios32: Found BIOS32 Service Directory header at 0xc00fdad0
bios32: Entry =3D 0xfdae0 (c00fdae0) Rev =3D 0 Len =3D 1
pcibios: PCI BIOS entry at 0xf0000+0xdb01
pnpbios: Found PnP BIOS data at 0xc00f6b30
pnpbios: Entry =3D f0000:5a04 Rev =3D 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
MADT: Found IO APIC ID 2, Vector 0 at 0xfec00000
ioapic0: intpin 0 -> ExtINT (edge, activehi)
ioapic0: intpin 1 -> irq 1 (edge, activehi)
ioapic0: intpin 2 -> irq 2 (edge, activehi)
ioapic0: intpin 3 -> irq 3 (edge, activehi)
ioapic0: intpin 4 -> irq 4 (edge, activehi)
ioapic0: intpin 5 -> irq 5 (edge, activehi)
ioapic0: intpin 6 -> irq 6 (edge, activehi)
ioapic0: intpin 7 -> irq 7 (edge, activehi)
ioapic0: intpin 8 -> irq 8 (edge, activehi)
ioapic0: intpin 9 -> irq 9 (edge, activehi)
ioapic0: intpin 10 -> irq 10 (edge, activehi)
ioapic0: intpin 11 -> irq 11 (edge, activehi)
ioapic0: intpin 12 -> irq 12 (edge, activehi)
ioapic0: intpin 13 -> irq 13 (edge, activehi)
ioapic0: intpin 14 -> irq 14 (edge, activehi)
ioapic0: intpin 15 -> irq 15 (edge, activehi)
ioapic0: intpin 16 -> irq 16 (level, activelo)
ioapic0: intpin 17 -> irq 17 (level, activelo)
ioapic0: intpin 18 -> irq 18 (level, activelo)
ioapic0: intpin 19 -> irq 19 (level, activelo)
ioapic0: intpin 20 -> irq 20 (level, activelo)
ioapic0: intpin 21 -> irq 21 (level, activelo)
ioapic0: intpin 22 -> irq 22 (level, activelo)
ioapic0: intpin 23 -> irq 23 (level, activelo)
MADT: intr override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: active-hi
MADT: intr override: source 5, irq 5
ioapic0: intpin 5 trigger: level
ioapic0: intpin 5 polarity: active-lo
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00040011 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: [FAST]
stray irq13
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT > on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D06911106)
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00f7220
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x05 3 4 5 7 9 10 11 12 14 15
embedded 0 7 A 0xfe 14
embedded 0 7 B 0xff 15
embedded 0 7 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 7 D 0x05 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 C 0x05 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 D 0x01 3 4 5 7 9 10 11 12 14 15
slot 2 0 10 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 2 0 10 B 0x05 3 4 5 7 9 10 11 12 14 15
slot 2 0 10 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 2 0 10 D 0x02 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 A 0x05 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 B 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 C 0x02 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 D 0x03 3 4 5 7 9 10 11 12 14 15
slot 4 0 12 A 0x01 3 4 5 7 9 10 11 12 14 15
slot 4 0 12 B 0x02 3 4 5 7 9 10 11 12 14 15
slot 4 0 12 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 4 0 12 D 0x05 3 4 5 7 9 10 11 12 14 15
slot 5 0 13 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 5 0 13 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 5 0 13 C 0x05 3 4 5 7 9 10 11 12 14 15
slot 5 0 13 D 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 14 A 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 14 B 0x05 3 4 5 7 9 10 11 12 14 15
embedded 0 14 C 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 14 D 0x02 3 4 5 7 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 7 func 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 3, width =3D 2
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0.7.2
\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] 0.7.3
---- before setting priority for links ------------
\_SB_.LNKC:
interrupts: 3 4 5 6 7 9 10 11 12 14 =
15
penalty: 1110 1110 110 1110 1110 210 110 110 1110 10110 10110
references: 1
priority: 0
---- before fixup boot-disabled links -------------
\_SB_.LNKC:
interrupts: 3 4 5 6 7 9 10 11 12 14 =
15
penalty: 1110 1110 110 1110 1110 210 110 110 1110 10110 10110
references: 1
priority: 2391
---- after fixup boot-disabled links --------------
\_SB_.LNKC:
interrupts: 11 10 5 9 12 7 6 4 3 15 =
14
penalty: 110 110 110 210 1110 1110 1110 1110 1110 10110 10110
references: 1
priority: 2391
---- arbitrated configuration ---------------------
\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0.7.2
\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] 0.7.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=3D0
map[10]: type 3, range 32, base e0000000, size 26, enabled
found-> vendor=3D0x1106, dev=3D0x0691, revid=3D0xc4
bus=3D0, slot=3D0, func=3D0
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0006, statreg=3D0x2210, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=3D0x1106, dev=3D0x8598, revid=3D0x00
bus=3D0, slot=3D1, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x2230, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x1106, dev=3D0x0686, revid=3D0x22
bus=3D0, slot=3D7, func=3D0
class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0087, statreg=3D0x0210, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
found-> vendor=3D0x1106, dev=3D0x0571, revid=3D0x10
bus=3D0, slot=3D7, func=3D1
class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000a400, size 5, enabled
pcib0: matched entry for 0.7.INTD (source \_SB_.LNKD)
pcib0: slot 7 INTD is routed to irq 9
found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x10
bus=3D0, slot=3D7, func=3D2
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0117, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Dd, irq=3D9
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000a800, size 5, enabled
pcib0: matched entry for 0.7.INTD (source \_SB_.LNKD)
pcib0: slot 7 INTD is routed to irq 9
found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x10
bus=3D0, slot=3D7, func=3D3
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0117, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Dd, irq=3D9
powerspec 2 supports D0 D3 current D0
found-> vendor=3D0x1106, dev=3D0x3057, revid=3D0x30
bus=3D0, slot=3D7, func=3D4
class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0000, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000dc00, size 3, enabled
map[14]: type 4, range 32, base 0000d800, size 2, enabled
map[18]: type 4, range 32, base 0000d400, size 3, enabled
map[1c]: type 4, range 32, base 0000d000, size 2, enabled
map[20]: type 4, range 32, base 0000cc00, size 4, enabled
map[24]: type 1, range 32, base dfffc000, size 14, enabled
pcib0: matched entry for 0.9.INTA (source )
pcib0: device is hardwired to IRQ 17
found-> vendor=3D0x105a, dev=3D0x4d68, revid=3D0x02
bus=3D0, slot=3D9, func=3D0
class=3D01-80-85, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0430, cachelnsz=3D8 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x12 (4500 ns)
intpin=3Da, irq=3D17
powerspec 1 supports D0 D1 D3 current D0
map[10]: type 4, range 32, base 0000ac00, size 6, enabled
pcib0: matched entry for 0.11.INTA (source )
pcib0: device is hardwired to IRQ 19
found-> vendor=3D0x1274, dev=3D0x5000, revid=3D0x00
bus=3D0, slot=3D11, func=3D0
class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0105, statreg=3D0x0400, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x0c (3000 ns), maxlat=3D0x80 (32000 n=
s)
intpin=3Da, irq=3D19
map[10]: type 4, range 32, base 0000c400, size 3, enabled
map[14]: type 4, range 32, base 0000c000, size 3, enabled
map[18]: type 4, range 32, base 0000bc00, size 3, enabled
map[1c]: type 4, range 32, base 0000b800, size 3, enabled
map[20]: type 4, range 32, base 0000b400, size 3, enabled
map[24]: type 4, range 32, base 0000b000, size 4, enabled
pcib0: matched entry for 0.12.INTA (source )
pcib0: device is hardwired to IRQ 16
found-> vendor=3D0x9710, dev=3D0x9845, revid=3D0x01
bus=3D0, slot=3D12, func=3D0
class=3D07-00-02, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0103, statreg=3D0x0280, cachelnsz=3D8 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D16
map[10]: type 4, range 32, base 0000c800, size 8, enabled
map[14]: type 1, range 32, base dfffbf00, size 8, enabled
pcib0: matched entry for 0.13.INTA (source )
pcib0: device is hardwired to IRQ 17
found-> vendor=3D0x10d9, dev=3D0x0531, revid=3D0x25
bus=3D0, slot=3D13, func=3D0
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0187, statreg=3D0x0290, cachelnsz=3D8 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x38 (14000 n=
s)
intpin=3Da, irq=3D17
powerspec 1 supports D0 D1 D2 D3 current D0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xe0000000-0xe3fffff=
f at device 0.0 on pci0
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x5000-0x5fff
pcib1: memory decode 0xdde00000-0xdfefffff
pcib1: prefetched decode 0xcdc00000-0xddcfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=3D1
map[10]: type 1, range 32, base de000000, size 24, enabled
map[14]: type 3, range 32, base d0000000, size 27, enabled
pcib0: matched entry for 0.1.INTA (source )
pcib0: device is hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
found-> vendor=3D0x10de, dev=3D0x0110, revid=3D0xb2
bus=3D1, slot=3D0, func=3D0
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x05 (1250 ns), maxlat=3D0x01 (250 ns)
intpin=3Da, irq=3D16
powerspec 2 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686A UDMA66 controller> port 0xffa0-0xffaf at device 7.1 o=
n pci0
ata0: reset tp1 mask=3D02 ostat0=3Dff ostat1=3D00
ata0-slave: stat=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata0: reset tp2 mask=3D02 stat0=3D00 stat1=3D00 devices=3D0x8<ATAPI_SLAVE>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00
ata1-master: stat=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata1-slave: stat=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata1: reset tp2 mask=3D03 stat0=3D00 stat1=3D00 devices=3D0x4<ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xa400-0xa41f irq 9 at device 7.2 o=
n pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xa800-0xa81f irq 9 at device 7.3 o=
n pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 7.4 (no driver attached)
atapci1: <Promise PDC20268 UDMA100 controller> port 0xcc00-0xcc0f,0xd000-0x=
d003,0xd400-0xd407,0xd800-0xd803,0xdc00-0xdc07 mem 0xdfffc000-0xdfffffff ir=
q 17 at device 9.0 on pci0
atapci1: [MPSAFE]
ata2: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00
ata2-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata2-slave: stat=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata2: reset tp2 mask=3D03 stat0=3D50 stat1=3D00 devices=3D0x1<ATA_MASTER>
ata2: at 0xdc00 on atapci1
ata2: [MPSAFE]
ata3: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata3-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata3-slave: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata3: reset tp2 mask=3D03 stat0=3D50 stat1=3D50 devices=3D0x3<ATA_SLAVE,ATA=
_MASTER>
ata3: at 0xd400 on atapci1
ata3: [MPSAFE]
pcm0: <AudioPCI ES1370> port 0xac00-0xac3f irq 19 at device 11.0 on pci0
pcm0: sndbuf_setmap 310000, 1000; 0xc47bc000 -> 310000
pcm0: sndbuf_setmap 30e000, 1000; 0xc47ba000 -> 30e000
puc0: <NetMos NM9845 Quad UART> port 0xb000-0xb00f,0xb400-0xb407,0xb800-0xb=
807,0xbc00-0xbc07,0xc000-0xc007,0xc400-0xc407 irq 16 at device 12.0 on pci0
sio4: <NetMos NM9845 Quad UART> on puc0
sio4: type 16550A
sio4: unable to activate interrupt in fast mode - using normal mode
sio5: <NetMos NM9845 Quad UART> on puc0
sio5: type 16550A
sio5: unable to activate interrupt in fast mode - using normal mode
sio6: <NetMos NM9845 Quad UART> on puc0
sio6: type 16550A
sio6: unable to activate interrupt in fast mode - using normal mode
sio7: <NetMos NM9845 Quad UART> on puc0
sio7: type 16550A
sio7: unable to activate interrupt in fast mode - using normal mode
dc0: <Macronix 98715AEC-C 10/100BaseTX> port 0xc800-0xc8ff mem 0xdfffbf00-0=
xdfffbfff irq 17 at device 13.0 on pci0
dc0: Ethernet address: 00:50:bf:76:2a:98
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: bpf attached
unknown: not probed (disabled)
acpi_button1: <Sleep Button> on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:ffffffff
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x=
3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0xe001 0xe011 0xe001 0xe001
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1: irq maps: 0xe001 0xe009 0xe001 0xe001
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/ECP/NIBBLE_ID/ECP_ID/Extensibility Li=
nk
Probing for PnP devices on ppbus0:
ppbus0: <hp deskjet 5550> PRINTER MLC,PCL,PML,DW-PCL,DYN,DESKJET
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xcc800-0xcffff,0xc0000-0xcc7ff on isa0
pmtimer0 on isa0
adv0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
bt0 failed to probe on isa0
cs0 failed to probe at port 0x300 on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000-0xdbfff irq 10 on isa0
fe0 failed to probe at port 0x300 on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x100>
sc0: fb0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0 failed to probe at port 0x300 irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80=20
bf 1f 00 4f 0d 0e 00 00 06 90 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 863680612 Hz quality -100
Timecounters tick every 10.000 msec
lo0: bpf attached
ata0-slave: pio=3D0x0c wdma=3D0x22 udma=3D0xffffffff cable=3D40pin
ata0-slave: setting PIO4 on VIA 82C686A chip
acd0: <TOSHIBA CD-ROM XM-6202B/1110> CDROM drive at ata0 as slave
acd0: read 5512KB/s (5512KB/s), 256KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data disc
ata1: spurious interrupt - status=3D0x58 error=3D0x00
ata1-master: pio=3D0x08 wdma=3D0xffffffff udma=3D0xffffffff cable=3D40pin
ata1-master: FAILURE - SETFEATURES status=3D51<READY,DSC,ERROR> error=3D4<A=
BORTED>
ata1-master: FAILURE setting PIO0 on VIA 82C686A chip
ata1: resetting devices ..
ata1: reset tp1 mask=3D03 ostat0=3Dd0 ostat1=3D80
acd1: stat=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata1-slave: stat=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata1: reset tp2 mask=3D03 stat0=3D00 stat1=3D00 devices=3D0x4<ATAPI_MASTER>
acd1: pio=3D0x0c wdma=3D0x22 udma=3D0x42 cable=3D40pin
~
--uZ3hkaAS1mZxFaxD
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="boot.good"
Content-Transfer-Encoding: quoted-printable
OK boot -0 v
/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=
=08|=08/=08-=08\=08|=08/=08/boot/kernel/acpi.ko text=3D0x3b4dc -=08\=08|=08=
/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08data=3D0x16cc+0xee0 /=08sym=
s=3D[0x4+0x5c10-=08+0x4+0x7a31\=08|=08]
/=08-=08\=08|=08/=08-=08\=08SMAP type=3D01 base=3D0000000000000000 len=3D00=
0000000009fc00
SMAP type=3D02 base=3D000000000009fc00 len=3D0000000000000400
SMAP type=3D02 base=3D00000000000f0000 len=3D0000000000010000
SMAP type=3D01 base=3D0000000000100000 len=3D000000001fef0000
SMAP type=3D03 base=3D000000001fff0000 len=3D0000000000008000
SMAP type=3D04 base=3D000000001fff8000 len=3D0000000000008000
SMAP type=3D02 base=3D00000000fec00000 len=3D0000000000001000
SMAP type=3D02 base=3D00000000fee00000 len=3D0000000000001000
SMAP type=3D02 base=3D00000000ffff0000 len=3D0000000000010000
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #8: Sun Oct 5 19:04:14 BST 2003
setantae@rhadamanth.private.submonkey.net:/usr/obj/usr/src/sys/RHADAMAN=
TH
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0847000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0847250.
Calibrating clock(s) ... i8254 clock: 1193226 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 863679965 Hz
CPU: Intel Pentium III (863.68-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x686 Stepping =3D 6
Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory =3D 536805376 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c29000 - 0x000000001f6c9fff, 514461696 bytes (125601 pages)
avail memory =3D 511856640 (488 MB)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
bios32: Found BIOS32 Service Directory header at 0xc00fdad0
bios32: Entry =3D 0xfdae0 (c00fdae0) Rev =3D 0 Len =3D 1
pcibios: PCI BIOS entry at 0xf0000+0xdb01
pnpbios: Found PnP BIOS data at 0xc00f6b30
pnpbios: Entry =3D f0000:5a04 Rev =3D 1.0
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
SMP: CPU0 bsp_apic_configure():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT > on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060
pci_open(1a): mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D06911106)
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00f7220
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x05 3 4 5 7 9 10 11 12 14 15
embedded 0 7 A 0xfe 14
embedded 0 7 B 0xff 15
embedded 0 7 C 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 7 D 0x05 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 C 0x05 3 4 5 7 9 10 11 12 14 15
slot 1 0 9 D 0x01 3 4 5 7 9 10 11 12 14 15
slot 2 0 10 A 0x03 3 4 5 7 9 10 11 12 14 15
slot 2 0 10 B 0x05 3 4 5 7 9 10 11 12 14 15
slot 2 0 10 C 0x01 3 4 5 7 9 10 11 12 14 15
slot 2 0 10 D 0x02 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 A 0x05 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 B 0x01 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 C 0x02 3 4 5 7 9 10 11 12 14 15
slot 3 0 11 D 0x03 3 4 5 7 9 10 11 12 14 15
slot 4 0 12 A 0x01 3 4 5 7 9 10 11 12 14 15
slot 4 0 12 B 0x02 3 4 5 7 9 10 11 12 14 15
slot 4 0 12 C 0x03 3 4 5 7 9 10 11 12 14 15
slot 4 0 12 D 0x05 3 4 5 7 9 10 11 12 14 15
slot 5 0 13 A 0x02 3 4 5 7 9 10 11 12 14 15
slot 5 0 13 B 0x03 3 4 5 7 9 10 11 12 14 15
slot 5 0 13 C 0x05 3 4 5 7 9 10 11 12 14 15
slot 5 0 13 D 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 14 A 0x03 3 4 5 7 9 10 11 12 14 15
embedded 0 14 B 0x05 3 4 5 7 9 10 11 12 14 15
embedded 0 14 C 0x01 3 4 5 7 9 10 11 12 14 15
embedded 0 14 D 0x02 3 4 5 7 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 7 func 0
ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._ST=
A] (Node 0xc1cf3120), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._ST=
A] (Node 0xc1cf3120), AE_AML_REGION_LIMIT
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min =3D 1, max =3D 3, width =3D 2
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
AcpiOsDerivePciId: bus 0 dev 0 func 0
ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._ST=
A] (Node 0xc1cf3120), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._ST=
A] (Node 0xc1cf3120), AE_AML_REGION_LIMIT
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0.7.2
\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] 0.7.3
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] 0.9.0
\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0.9.1
\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] 0.9.2
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] 0.9.3
\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0.10.0
\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] 0.10.1
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] 0.10.2
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] 0.10.3
\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] 0.11.0
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] 0.11.1
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] 0.11.2
\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0.11.3
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] 0.12.0
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] 0.12.1
\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0.12.2
\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] 0.12.3
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] 0.13.0
\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0.13.1
\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] 0.13.2
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] 0.13.3
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] 0.1.0
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] 0.1.1
\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0.14.0
---- before setting priority for links ------------
\_SB_.LNKC:
interrupts: 3 4 5 6 7 9 10 11 12 14 =
15
penalty: 1770 1770 770 1770 1770 1370 1370 1370 1770 10770 10770
references: 7
priority: 0
---- before fixup boot-disabled links -------------
\_SB_.LNKC:
interrupts: 3 4 5 6 7 9 10 11 12 14 =
15
penalty: 1770 1770 770 1770 1770 1370 1370 1370 1770 10770 10770
references: 7
priority: 22444
---- after fixup boot-disabled links --------------
\_SB_.LNKC:
interrupts: 5 11 10 9 12 7 6 4 3 15 =
14
penalty: 770 1370 1370 1370 1770 1770 1770 1770 1770 10770 10770
references: 7
priority: 22444
---- arbitrated configuration ---------------------
\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0.7.2
\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] 0.7.3
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] 0.9.0
\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0.9.1
\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] 0.9.2
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] 0.9.3
\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0.10.0
\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] 0.10.1
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] 0.10.2
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] 0.10.3
\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] 0.11.0
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] 0.11.1
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] 0.11.2
\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0.11.3
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] 0.12.0
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] 0.12.1
\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0.12.2
\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] 0.12.3
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] 0.13.0
\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0.13.1
\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] 0.13.2
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] 0.13.3
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] 0.1.0
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] 0.1.1
\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0.14.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=3D0
map[10]: type 3, range 32, base e0000000, size 26, enabled
found-> vendor=3D0x1106, dev=3D0x0691, revid=3D0xc4
bus=3D0, slot=3D0, func=3D0
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0006, statreg=3D0x2210, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=3D0x1106, dev=3D0x8598, revid=3D0x00
bus=3D0, slot=3D1, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x2230, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x1106, dev=3D0x0686, revid=3D0x22
bus=3D0, slot=3D7, func=3D0
class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0087, statreg=3D0x0210, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
found-> vendor=3D0x1106, dev=3D0x0571, revid=3D0x10
bus=3D0, slot=3D7, func=3D1
class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
IOAPIC #0 intpin 19 -> irq 2
Freeing (NOT implemented) redirected PCI irq 9.
map[20]: type 4, range 32, base 0000a400, size 5, enabled
found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x10
bus=3D0, slot=3D7, func=3D2
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0117, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Dd, irq=3D2
powerspec 2 supports D0 D3 current D0
Freeing (NOT implemented) redirected PCI irq 9.
map[20]: type 4, range 32, base 0000a800, size 5, enabled
found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0x10
bus=3D0, slot=3D7, func=3D3
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0117, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Dd, irq=3D2
powerspec 2 supports D0 D3 current D0
found-> vendor=3D0x1106, dev=3D0x3057, revid=3D0x30
bus=3D0, slot=3D7, func=3D4
class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0000, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
IOAPIC #0 intpin 17 -> irq 16
Freeing (NOT implemented) redirected PCI irq 10.
map[10]: type 4, range 32, base 0000dc00, size 3, enabled
map[14]: type 4, range 32, base 0000d800, size 2, enabled
map[18]: type 4, range 32, base 0000d400, size 3, enabled
map[1c]: type 4, range 32, base 0000d000, size 2, enabled
map[20]: type 4, range 32, base 0000cc00, size 4, enabled
map[24]: type 1, range 32, base dfffc000, size 14, enabled
found-> vendor=3D0x105a, dev=3D0x4d68, revid=3D0x02
bus=3D0, slot=3D9, func=3D0
class=3D01-80-85, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0430, cachelnsz=3D8 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x12 (4500 ns)
intpin=3Da, irq=3D16
powerspec 1 supports D0 D1 D3 current D0
Freeing (NOT implemented) redirected PCI irq 9.
map[10]: type 4, range 32, base 0000ac00, size 6, enabled
found-> vendor=3D0x1274, dev=3D0x5000, revid=3D0x00
bus=3D0, slot=3D11, func=3D0
class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0105, statreg=3D0x0400, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x0c (3000 ns), maxlat=3D0x80 (32000 n=
s)
intpin=3Da, irq=3D2
IOAPIC #0 intpin 16 -> irq 17
Freeing (NOT implemented) redirected PCI irq 11.
map[10]: type 4, range 32, base 0000c400, size 3, enabled
map[14]: type 4, range 32, base 0000c000, size 3, enabled
map[18]: type 4, range 32, base 0000bc00, size 3, enabled
map[1c]: type 4, range 32, base 0000b800, size 3, enabled
map[20]: type 4, range 32, base 0000b400, size 3, enabled
map[24]: type 4, range 32, base 0000b000, size 4, enabled
found-> vendor=3D0x9710, dev=3D0x9845, revid=3D0x01
bus=3D0, slot=3D12, func=3D0
class=3D07-00-02, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0103, statreg=3D0x0280, cachelnsz=3D8 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D17
Freeing (NOT implemented) redirected PCI irq 10.
map[10]: type 4, range 32, base 0000c800, size 8, enabled
map[14]: type 1, range 32, base dfffbf00, size 8, enabled
found-> vendor=3D0x10d9, dev=3D0x0531, revid=3D0x25
bus=3D0, slot=3D13, func=3D0
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0187, statreg=3D0x0290, cachelnsz=3D8 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x38 (14000 n=
s)
intpin=3Da, irq=3D16
powerspec 1 supports D0 D1 D2 D3 current D0
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xe0000000-0xe3fffff=
f at device 0.0 on pci0
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x5000-0x5fff
pcib1: memory decode 0xdde00000-0xdfefffff
pcib1: prefetched decode 0xcdc00000-0xddcfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=3D1
Freeing (NOT implemented) redirected PCI irq 11.
map[10]: type 1, range 32, base de000000, size 24, enabled
map[14]: type 3, range 32, base d0000000, size 27, enabled
found-> vendor=3D0x10de, dev=3D0x0110, revid=3D0xb2
bus=3D1, slot=3D0, func=3D0
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x05 (1250 ns), maxlat=3D0x01 (250 ns)
intpin=3Da, irq=3D17
powerspec 2 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686A UDMA66 controller> port 0xffa0-0xffaf at device 7.1 o=
n pci0
ata0: reset tp1 mask=3D02 ostat0=3Dff ostat1=3D00
ata0-slave: stat=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata0: reset tp2 mask=3D02 stat0=3D00 stat1=3D00 devices=3D0x8<ATAPI_SLAVE>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00
ata1-master: stat=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata1-slave: stat=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata1: reset tp2 mask=3D03 stat0=3D00 stat1=3D00 devices=3D0x4<ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xa400-0xa41f irq 2 at device 7.2 o=
n pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xa800-0xa81f irq 2 at device 7.3 o=
n pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 7.4 (no driver attached)
atapci1: <Promise PDC20268 UDMA100 controller> port 0xcc00-0xcc0f,0xd000-0x=
d003,0xd400-0xd407,0xd800-0xd803,0xdc00-0xdc07 mem 0xdfffc000-0xdfffffff ir=
q 16 at device 9.0 on pci0
atapci1: [MPSAFE]
ata2: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00
ata2-master: stat=3D0x80 err=3D0x80 lsb=3D0x80 msb=3D0x80
ata2-slave: stat=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata2-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata2: reset tp2 mask=3D03 stat0=3D50 stat1=3D00 devices=3D0x1<ATA_MASTER>
ata2: at 0xdc00 on atapci1
ata2: [MPSAFE]
ata3: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata3-master: stat=3D0x80 err=3D0x80 lsb=3D0x80 msb=3D0x80
ata3-slave: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata3-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata3: reset tp2 mask=3D03 stat0=3D50 stat1=3D50 devices=3D0x3<ATA_SLAVE,ATA=
_MASTER>
ata3: at 0xd400 on atapci1
ata3: [MPSAFE]
pcm0: <AudioPCI ES1370> port 0xac00-0xac3f irq 2 at device 11.0 on pci0
pcm0: sndbuf_setmap 27a000, 1000; 0xc47e6000 -> 27a000
pcm0: sndbuf_setmap 278000, 1000; 0xc47e4000 -> 278000
puc0: <NetMos NM9845 Quad UART> port 0xb000-0xb00f,0xb400-0xb407,0xb800-0xb=
807,0xbc00-0xbc07,0xc000-0xc007,0xc400-0xc407 irq 17 at device 12.0 on pci0
sio4: <NetMos NM9845 Quad UART> on puc0
sio4: type 16550A
sio4: unable to activate interrupt in fast mode - using normal mode
sio5: <NetMos NM9845 Quad UART> on puc0
sio5: type 16550A
sio5: unable to activate interrupt in fast mode - using normal mode
sio6: <NetMos NM9845 Quad UART> on puc0
sio6: type 16550A
sio6: unable to activate interrupt in fast mode - using normal mode
sio7: <NetMos NM9845 Quad UART> on puc0
sio7: type 16550A
sio7: unable to activate interrupt in fast mode - using normal mode
dc0: <Macronix 98715AEC-C 10/100BaseTX> port 0xc800-0xc8ff mem 0xdfffbf00-0=
xdfffbfff irq 16 at device 13.0 on pci0
dc0: Ethernet address: 00:50:bf:76:2a:98
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: bpf attached
unknown: not probed (disabled)
acpi_button1: <Sleep Button> on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._ST=
A] (Node 0xc1cf3120), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._ST=
A] (Node 0xc1cf3120), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._ST=
A] (Node 0xc1cf3120), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._ST=
A] (Node 0xc1cf3120), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._ST=
A] (Node 0xc1cf3120), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._ST=
A] (Node 0xc1cf3120), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._ST=
A] (Node 0xc1cf3120), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._ST=
A] (Node 0xc1cf3120), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._ST=
A] (Node 0xc1cf3120), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._ST=
A] (Node 0xc1cf3120), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._ST=
A] (Node 0xc1cf3120), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._ST=
A] (Node 0xc1cf3120), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._ST=
A] (Node 0xc1cf3120), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._ST=
A] (Node 0xc1cf3120), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._ST=
A] (Node 0xc1cf3120), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._ST=
A] (Node 0xc1cf3120), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._ST=
A] (Node 0xc1cf3120), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._ST=
A] (Node 0xc1cf3120), AE_AML_REGION_LIMIT
ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._ST=
A] (Node 0xc1cf3120), AE_AML_REGION_LIMIT
ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._ST=
A] (Node 0xc1cf3120), AE_AML_REGION_LIMIT
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:ffffffff
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x=
3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0xc001 0xc011 0xc001 0xc001
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1: irq maps: 0xc001 0xc009 0xc001 0xc001
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/ECP/NIBBLE_ID/ECP_ID/Extensibility Li=
nk
Probing for PnP devices on ppbus0:
ppbus0: <hp deskjet 5550> PRINTER MLC,PCL,PML,DW-PCL,DYN,DESKJET
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xcc800-0xcffff,0xc0000-0xcc7ff on isa0
pmtimer0 on isa0
adv0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
bt0 failed to probe on isa0
cs0 failed to probe at port 0x300 on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fe0 failed to probe at port 0x300 on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x100>
sc0: fb0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0 failed to probe at port 0x300 irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80=20
bf 1f 00 4f 0d 0e 00 00 06 90 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
SMP: enabled INTs: 2, 3, 4, 5, 6, 7, 12, 14, 15, 16, apic_imen: 0xfffe2f03
Device configuration finished.
procfs registered
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Timecounter "TSC" frequency 863679965 Hz quality -100
Timecounters tick every 10.000 msec
lo0: bpf attached
acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0%
ata0-slave: pio=3D0x0c wdma=3D0x22 udma=3D0xffffffff cable=3D40pin
acd0: setting PIO4 on VIA 82C686A chip
acd0: <TOSHIBA CD-ROM XM-6202B/1110> CDROM drive at ata0 as slave
acd0: read 5512KB/s (5512KB/s), 256KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data disc
ata1: spurious interrupt - status=3D0x58 error=3D0x00
ata1-master: pio=3D0x08 wdma=3D0xffffffff udma=3D0xffffffff cable=3D40pin
ata1: resetting devices ..
ata1: reset tp1 mask=3D03 ostat0=3Dd0 ostat1=3D80
acd1: stat=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata1-slave: stat=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata1: reset tp2 mask=3D03 stat0=3D00 stat1=3D00 devices=3D0x4<ATAPI_MASTER>
acd1: pio=3D0x0c wdma=3D0x22 udma=3D0x42 cable=3D40pin
done
acd1: WARNING - SETFEATURES recovered from missing interrupt
acd1: setting PIO4 on VIA 82C686A chip
acd1: <SONY CD-RW CRX210E1/2YS1> CDRW drive at ata1 as master
acd1: read 28531KB/s (6875KB/s) write 172KB/s (8250KB/s), 2048KB buffer, PI=
O4
acd1: Reads: CDR, CDRW, CDDA stream, packet
acd1: Writes: CDR, CDRW, test write, burnproof
acd1: Audio: play, 255 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: no/blank disc
ata2-master: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
ad4: setting UDMA100 on Promise PDC20268 chip
GEOM: create disk ad4 dp=3D0xc4928a70
ad4: <IC35L040AVER07-0/ER4OA44A> ATA-5 disk at ata2-master
ad4: 39266MB (80418240 sectors), 79780 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad4
ata3-slave: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
ata3-master: pio=3D0x0c wdma=3D0x22 udma=3D0x45 cable=3D80pin
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):964/254/63 s:63 l:15502662
[1] f:00 typ:165 s(CHS):965/0/1 e(CHS):1023/254/63 s:15502725 l:24145695
[2] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:39648420 l:6297480
[3] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:45945900 l:34459425
GEOM: Configure ad4s1, start 32256 length 7937362944 end 7937395199
GEOM: Configure ad4s2, start 7937395200 length 12362595840 end 20299991039
GEOM: Configure ad4s3, start 20299991040 length 3224309760 end 23524300799
GEOM: Configure ad4s4, start 23524300800 length 17643225600 end 41167526399
ad6: setting UDMA100 on Promise PDC20268 chip
GEOM: create disk ad6 dp=3D0xc4928870
ad6: <IC35L100AVVA07-0/VA5OA52A> ATA-5 disk at ata3-master
ad6: 98166MB (201045600 sectors), 199450 C, 16 H, 63 S, 512 B
ad6: 16 secs/int, 1 depth queue, UDMA100
GEOM: Configure ad4s2a, start 0 length 268435456 end 268435455
GEOM: Configure ad4s2b, start 268435456 length 536870912 end 805306367
GEOM: Configure ad4s2c, start 0 length 12362595840 end 12362595839
GEOM: Configure ad4s2d, start 11295260672 length 1067335168 end 12362595839
GEOM: Configure ad4s2e, start 805306368 length 1363148800 end 2168455167
GEOM: Configure ad4s2f, start 2168455168 length 2147483648 end 4315938815
GEOM: Configure ad4s2g, start 4315938816 length 1610612736 end 5926551551
GEOM: Configure ad4s2h, start 5926551552 length 5368709120 end 11295260671
ad7: setting UDMA100 on Promise PDC20268 chip
GEOM: create disk ad7 dp=3D0xc4928270
ad7: <IC35L040AVER07-0/ER4OA46A> ATA-5 disk at ata3-slave
ad7: 39266MB (80418240 sectors), 79780 C, 16 H, 63 S, 512 B
ad7: 16 secs/int, 1 depth queue, UDMA100
SMP: AP CPU #1 Launched!
SMP: CPU1 ap_init():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
GEOM: Configure ad4s3a, start 0 length 3224309760 end 3224309759
GEOM: Configure ad4s3c, start 0 length 3224309760 end 3224309759
GEOM: Configure ad4s4c, start 0 length 17643225600 end 17643225599
GEOM: Configure ad4s4e, start 0 length 17643225600 end 17643225599
GEOM: new disk ad6
GEOM: new disk ad7
[0] f:00 typ:169 s(CHS):0/1/1 e(CHS):1023/184/63 s:63 l:50278977
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:50279040 l:50271795
[2] f:00 typ:169 s(CHS):1023/255/63 e(CHS):1023/254/63 s:100550835 l:502513=
20
[3] f:00 typ:12 s(CHS):1023/255/63 e(CHS):1023/254/63 s:150802155 l:50235255
GEOM: Configure ad6s1, start 32256 length 25742836224 end 25742868479
GEOM: Configure ad6s2, start 25742868480 length 25739159040 end 51482027519
GEOM: Configure ad6s3, start 51482027520 length 25728675840 end 77210703359
GEOM: Configure ad6s4, start 77210703360 length 25720450560 end 102931153919
[0] f:00 typ:12 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:35792757
[1] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:35792820 l:4176900
[2] f:00 typ:5 s(CHS):1023/255/63 e(CHS):1023/254/63 s:39969720 l:23005080
[3] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:62974800 l:17430525
GEOM: Configure ad7s1, start 32256 length 18325891584 end 18325923839
GEOM: Configure ad7s2, start 18325923840 length 2138572800 end 20464496639
GEOM: Configure ad7s3, start 20464496640 length 11778600960 end 32243097599
GEOM: Configure ad7s4, start 32243097600 length 8924428800 end 41167526399
GEOM: Configure ad6s2a, start 0 length 536870912 end 536870911
GEOM: Configure ad6s2b, start 536870912 length 1610612736 end 2147483647
GEOM: Configure ad6s2c, start 0 length 25739159040 end 25739159039
GEOM: Configure ad6s2d, start 2147483648 length 3221225472 end 5368709119
GEOM: Configure ad6s2e, start 5368709120 length 6442450944 end 11811160063
GEOM: Configure ad6s2f, start 11811160064 length 4294967296 end 16106127359
GEOM: Configure ad6s2g, start 16106127360 length 9633031680 end 25739159039
GEOM: Configure ad7s2b, start 0 length 536870912 end 536870911
GEOM: Configure ad7s2c, start 0 length 2138572800 end 2138572799
GEOM: Configure ad7s2e, start 536870912 length 1320157184 end 1857028095
GEOM: Configure ad7s2f, start 1857028096 length 281544704 end 2138572799
MBREXT Slice 5 on ad7s3:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:20000862
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:20000925 l:3004155
GEOM: Configure ad7s5, start 32256 length 10240441344 end 10240473599
MBREXT Slice 6 on ad7s3:
[0] f:00 typ:130 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:3004092
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad7s6, start 10240505856 length 1538095104 end 11778600959
GEOM: Configure ad7s4a, start 0 length 268435456 end 268435455
GEOM: Configure ad7s4c, start 0 length 8924428800 end 8924428799
GEOM: Configure ad7s4d, start 268435456 length 1073741824 end 1342177279
GEOM: Configure ad7s4e, start 1342177280 length 5368709120 end 6710886399
GEOM: Configure ad7s4f, start 6710886400 length 2213542400 end 8924428799
Mounting root from ufs:/dev/ad6s2a
start_init: trying /sbin/init
Loading configuration files.
Entropy harvesting: interrupts ethernet point_to_point.
kernel dumps on /dev/ad6s2b
swapon: adding /dev/ad6s2b as swap device
Starting file system checks:
/dev/ad6s2a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad6s2a: clean, 194347 free (523 frags, 24228 blocks, 0.2% fragmentatio=
n)
/dev/ad6s2e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad6s2e: clean, 1935130 free (21594 frags, 239192 blocks, 0.7% fragment=
ation)
/dev/ad6s2d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad6s2d: clean, 1414569 free (2337 frags, 176529 blocks, 0.2% fragmenta=
tion)
/dev/ad6s2g: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad6s2g: clean, 4378256 free (272 frags, 547248 blocks, 0.0% fragmentat=
ion)
security.jail.set_hostname_allowed: 1 -> 0
Setting hostname: rhadamanth.private.submonkey.net.
dc0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.10.1 netmask 0xffffff00 broadcast 192.168.10.255
inet6 fe80::250:bfff:fe76:2a98%dc0 prefixlen 64 tentative scopeid 0x1=20
inet 192.168.10.129 netmask 0xffffffff broadcast 192.168.10.129
inet 192.168.10.130 netmask 0xffffffff broadcast 192.168.10.130
ether 00:50:bf:76:2a:98
media: Ethernet autoselect (none)
status: no carrier
lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128=20
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2=20
inet 127.0.0.1 netmask 0xff000000=20
add net default: gateway 192.168.10.17
Additional routing options:.
hw.bus.devctl_disable: 0 -> 1
Mounting NFS file systems:.
Starting syslogd.
Dec 5 21:18:43 rhadamanth syslogd: kernel boot file is /boot/kernel/kernel=
=0D
Checking for core dump...
savecore: no dumps found
Starting named.
NFS access cache time=3D2
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/=
lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
Starting usbd.
Starting local daemons:.
Updating motd.
Starting ntpd.
Configuring syscons: keymapkbdcontrol: setting keymap: Operation not suppor=
ted by device
blanktime.
Starting sshd.
Initial i386 initialization:.
Additional ABI support: linuxLinux ELF exec handler installed
=2E
Starting cron.
Local package initialization:cups: started scheduler.
Starting snmpd.
=2E
Additional TCP options:.
Starting exim.
Starting background file system checks in 60 seconds.
Fri Dec 5 21:18:49 GMT 2003
=0D
FreeBSD/i386 (rhadamanth.private.submonkey.net) (ttyd0)=0D
=0D
login: root
Password:
Dec 5 21:19:00 rhadamanth login: ROOT LOGIN (root) ON ttyd0=0D
Last login: Fri Dec 5 21:15:34 on ttyd0
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT (RHADAMANTH) #8: Sun Oct 5 19:04:14 BST 2003
2x Intel Pentium III (863.68-MHz 686-class CPU), 512MB RAM
root has logged on ttyd0 from local
{=1B[1m=1B[4mroot=1B[m@rhadamanth}-{~} # cd /boot=0D
{=1B[1m=1B[4mroot=1B[m@rhadamanth}-{/boot} # mv kernel kernekl=08=1B[K=08=
=1B[Kl.ok=0D
{=1B[1m=1B[4mroot=1B[m@rhadamanth}-{/boot} # mv kernel.new kernel=0D
{=1B[1m=1B[4mroot=1B[m@rhadamanth}-{/boot} # ls=0D
DEBUG boot2 kernel.good loader.conf pxeboot
GENERIC cdboot kernel.ok loader.help screen.4th
beastie.4th defaults kernel.old loader.old support.4th
boot device.hints liloboot loader.rc
boot0 frames.4th loader loader.rc.orig
boot1 kernel loader.4th mbr
{=1B[1m=1B[4mroot=1B[m@rhadamanth}-{/boot} # shutdown -r now=0D
Shutdown NOW!
shutdown: [pid 577]
=
=0D
=07*** FINAL System shutdown message from root@rhadamanth.private.submonkey=
=2Enet *=0D
*=07 =
=0D
System going down IMMEDIATELY =
=0D
=
=0D
=
=0D
Dec 5 21:19:24 rhadamanth shutdown: reboot by root: =0D
{=1B[1m=1B[4mroot=1B[m@rhadamanth}-{/boot} # =0D
System shutdown time has arrived=07=07=0D
Stopping exim.
Shutting down daemon processes:Stopping snmpd.
Waiting for PIDS: 526.
cups: stopped scheduler.
=2E
Stopping cron.
Shutting down local daemons:.
Writing entropy file:.
Terminated
=2E
Dec 5 21:19:32 rhadamanth syslogd: exiting on signal 15=0D
boot() called on cpu#0
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks, buffers remaining... 9 7 6 5 4 3 2 1=20
done
Uptime: 1m34s
Shutting down ACPI
Rebooting...
cpu_reset called on cpu#1
cpu_reset: Stopping other CPUs
cpu_reset: Restarting BSP
cpu_reset_proxy: Stopped CPU 1
--uZ3hkaAS1mZxFaxD--
--GZVR6ND4mMseVXL/
Content-Type: application/pgp-signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (FreeBSD)
iD8DBQE/0P0EocfcwTS3JF8RAoVqAJ4wBBWT/m2ZXPqgUFkqKax3YqQ5fACgtu+1
OxFssw+uVRs9XJatM6lqYMY=
=2RhH
-----END PGP SIGNATURE-----
--GZVR6ND4mMseVXL/--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031205214748.GB413>