Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 16 Dec 2003 05:35:47 -0500
From:      klchxbec <klchxbec@m-net.arbornet.org>
To:        freebsd-ia64@freebsd.org
Subject:   Re: 5.1 fails to boot on lion and rx5670
Message-ID:  <20031216053547.A39307@m-net.arbornet.org>
In-Reply-To: <20031210203742.GA24702@ns1.xcllnt.net>; from marcel@xcllnt.net on Wed, Dec 10, 2003 at 12:37:42PM -0800
References:  <20031210043551.A91490@m-net.arbornet.org> <20031210203742.GA24702@ns1.xcllnt.net>

next in thread | previous in thread | raw e-mail | index | archive | help
I tried 5.2-RC1 on a Lion server. It hung trying to send commands
to a SCSI_PROCESSOR device. These are not disks and probably
FreeBSD is trying to send it a read capacity command or something.
This hangs off the internal qlisp scsi card. Relevant excerpt
from the boot -v:

isp0: <Qlogic ISP 12160 PCI SCSI Adapter> port 0xa800-0xa8ff mem 0xf1ff0000-0xf1ff0fff irq 48 at device 2.0 on pci1
isp0: using I/O space register mapping
isp0: bus 0 is in LVD Mode
isp0: bus 1 is in LVD Mode
isp0: Board Type 12160, Chip Revision 0x6, resident F/W Revision 10.4.31
isp0: Last F/W revision was 10.4.31
isp0: 563 max I/O commands supported
isp0: Initiator ID is 7 on Channel 0
isp0: Initiator ID is 7 on Channel 1
isp0: Enabled FW features (0xa)
isp0: driver initiated bus reset of bus 0
isp0: driver initiated bus reset of bus 1
(probe0:isp0:0:0:0): Retrying Command
(probe1:isp0:0:1:0): Retrying Command
(probe6:isp0:0:6:0): error 22
(probe6:isp0:0:6:0): Unretryable Error

The inquriy data for this device (target id 6) is 
vendorid:productid:dev_type:periph_qualifier
ESG-SHV :SCA HSBP M12    :3:0

I think FreeBSD scsi stack should be fixed not to probe targets
of type SCSI_PROCESSOR(3). Is it possible to fix it before
5.2-RELEASE goes out ?



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031216053547.A39307>