Date: Mon, 29 Dec 2003 19:16:15 +0900 (JST) From: Hideki Yamamoto <yamamoto436@oki.com> To: wes@softweyr.com Cc: stable@freebsd.org Subject: Re: bge drivers does not work for 3COM 3C996-SX / 3C996B-T Message-ID: <20031229.191615.71155718.yamamoto436@oki.com> In-Reply-To: <20031229.184207.74681106.yamamoto436@oki.com> References: <20031228.210152.74688241.yamamoto436@oki.com> <200312282059.47990.wes@softweyr.com> <20031229.184207.74681106.yamamoto436@oki.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Dear Peters
> > >
> > > bge0: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem
> > > 0xf7ef0000-0xf7efffff irq 10 at device 1.0 on pci1 bge0: Ethernet
> > > address: 00:04:76:e1:06:cf
> >
> > No miibus or PHY on bge0?
>
> Sorry, I cannot answer because my knowledge is not sufficient.
Neither PHY nor miibus exist on bge0 and bge2.
Both bge0 and bge2 are SX cards. The following is the full dmesg.
bge1 and bge3 have miibus and phy.
------------------------------------------------------------
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-STABLE #0: Sun Dec 28 17:21:50 JST 2003
vod@tsrmldgw1:/usr/obj/usr/src/sys/mldgw
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Xeon(TM) CPU 3.06GHz (3065.81-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 1610588160 (1572840K bytes)
avail memory = 1562906624 (1526276K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
Programming 16 pins in IOAPIC #2
Programming 16 pins in IOAPIC #3
FreeBSD/SMP: Multiprocessor motherboard: 4 CPUs
cpu0 (BSP): apic id: 6, version: 0x00050014, at 0xfee00000
cpu1 (AP): apic id: 7, version: 0x00050014, at 0xfee00000
cpu2 (AP): apic id: 0, version: 0x00050014, at 0xfee00000
cpu3 (AP): apic id: 1, version: 0x00050014, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 3, version: 0x000f0011, at 0xfec01000
io2 (APIC): apic id: 4, version: 0x000f0011, at 0xfec02000
io3 (APIC): apic id: 5, version: 0x000f0011, at 0xfec03000
Preloaded elf kernel "kernel" at 0xc0430000.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #1 intpin 15 -> irq 2
IOAPIC #1 intpin 7 -> irq 3
IOAPIC #1 intpin 6 -> irq 5
IOAPIC #0 intpin 10 -> irq 7
pci0: <PCI bus> on pcib0
pci0: <ATI Mach64-GR graphics accelerator> at 3.0
ciss0: <Compaq Smart Array 5i> port 0x2800-0x28ff mem 0xf5df0000-0xf5df3fff,0xf5f80000-0xf5fbffff irq 2 at device 4.0 on pci0
pci0: <unknown card> (vendor=0x0e11, dev=0xb203) at 5.0 irq 3
pci0: <unknown card> (vendor=0x0e11, dev=0xb204) at 5.2 irq 5
isab0: <PCI to ISA bridge (vendor=1166 device=0201)> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB5 ATA100 controller> port 0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xf5e70000-0xf5e70fff irq 7 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: <Host to PCI bridge> on motherboard
IOAPIC #1 intpin 12 -> irq 10
IOAPIC #1 intpin 14 -> irq 11
pci1: <PCI bus> on pcib1
bge0: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xf7ef0000-0xf7efffff irq 10 at device 1.0 on pci1
bge0: Ethernet address: 00:04:76:e1:06:cf
bge1: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf7ee0000-0xf7eeffff irq 11 at device 2.0 on pci1
bge1: Ethernet address: 00:0b:cd:d2:b0:40
miibus0: <MII bus> on bge1
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
pcib2: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib2
pcib3: <Host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib3
pcib4: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
IOAPIC #1 intpin 10 -> irq 15
IOAPIC #1 intpin 13 -> irq 16
pci4: <PCI bus> on pcib4
bge2: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xf7ff0000-0xf7ffffff irq 15 at device 1.0 on pci4
bge2: Ethernet address: 00:0a:5e:1d:83:25
bge3: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf7fe0000-0xf7feffff irq 16 at device 2.0 on pci4
bge3: Ethernet address: 00:0b:cd:d2:b0:3b
miibus1: <MII bus> on bge3
brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
pcib5: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci5: <PCI bus> on pcib5
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0733 (System Board)> on eisa0 slot 0
eisa0: unknown card Z@B0000 (0x68020000) at slot 2
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcd7ff,0xee000-0xeffff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
ciss0: *** Cache enabled
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
acd0: CDROM <CRN-8245B> at ata0-master PIO4
SMP: AP CPU #2 Launched!
Mounting root from ufs:/dev/da0s1a
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-0 device
da0: 135.168MB/s transfers
da0: 69459MB (142253280 512 byte sectors: 255H 32S/T 17433C)
bge0: gigabit link up
bge2: gigabit link up
-----------------------------------------------------------------
Regards,
Hideki Yamamoto |
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031229.191615.71155718.yamamoto436>