Date: 9 Jan 2004 08:56:01 -0000 From: andy-freebsd@splashground.de To: Dag-Erling =?iso-8859-1?q?Sm=F8rgrav?= <des@des.no> Cc: current@freebsd.org Subject: Re: Problems with Promise FastTrak Message-ID: <20040109085601.20479.qmail@paladin.fortunaty.net> In-Reply-To: <xzpu1351qmb.fsf@dwp.des.no> References: <20040109001353.16836.qmail@paladin.fortunaty.net> (andy@splashground.de's message of "9 Jan 2004 00:13:53 -0000"),<xzpu1351qmb.fsf@dwp.des.no>
next in thread | previous in thread | raw e-mail | index | archive | help
des wrote @ Fri, 09 Jan 2004 09:19:08 +0100: > andy@splashground.de writes: > > It's now master but that didn't change anything. > > Reading crawls around 5MB/s and writing around 2 MB/s > > and when writing the mouse misbehaves and there are > > stalls > 10s. > > Sounds like it's using PIO instead of DMA. What does your dmesg say? ----8<---- root@tower: atacontrol list ATA channel 0: Master: ad0 <IC35L120AVV207-0/V24OA63A> ATA/ATAPI rev 6 Slave: no device present ATA channel 1: Master: no device present Slave: acd0 <20X10/H.DH> ATA/ATAPI rev 0 ATA channel 2: Master: ad4 <IC35L120AVV207-0/V24OA63A> ATA/ATAPI rev 6 Slave: no device present ATA channel 3: Master: no device present Slave: no device present root@tower: atacontrol mode 2 Master = UDMA100 Slave = BIOSPIO ---->8---- ----8<----- tower: dmesg ----8<---- Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-BETA #2: Thu Jan 8 10:37:44 CET 2004 inst@tower.paradise.splashground.de:/usr/obj/usr/src/sys/TOWER acpi_alloc_wakeup_handler: can't alloc wake memory Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a20000. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(TM) XP 1800+ (1535.21-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0400000<AMIE,DSP,3DNow!> real memory = 805289984 (767 MB) avail memory = 771002368 (735 MB) ACPI APIC Table: <ASUS A7V333 > ioapic0: Changing APIC ID to 2 ioapic0 <Version 0.2> irqs 0-23 on motherboard Pentium Pro MTRR support enabled VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc00c52cd (c00052cd) VESA: Matrox Graphics Inc. acpi0: <ASUS A7V333 > on motherboard pcibios: BIOS version 2.10 Using $PIR table, 11 entries at 0xc00f1d90 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 acpi_cpu0: CLK_VAL field overlaps THT_EN bit acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 drm0: <Matrox G550 (AGP)> mem 0xdc800000-0xdcffffff,0xdd000000-0xdd003fff,0xde000000-0xdfffffff irq 16 at device 0.0 on pci1 info: [drm] AGP at 0xe0000000 128MB info: [drm] Initialized mga 3.1.0 20021029 on minor 0 pcm0: <CMedia CMI8738> port 0xd800-0xd8ff irq 17 at device 5.0 on pci0 atapci0: <Promise PDC20276 UDMA133 controller> port 0xb000-0xb00f,0xb400-0xb403,0xb800-0xb807,0xd000-0xd003,0xd400-0xd407 mem 0xdc000000-0xdc003fff irq 19 at device 6.0 on pci0 atapci0: [MPSAFE] ata2: at 0xd400 on atapci0 ata2: [MPSAFE] ata3: at 0xb800 on atapci0 ata3: [MPSAFE] fwohci0: vendor=104c, dev=8026 fwohci0: <1394 Open Host Controller Interface> mem 0xdb000000-0xdb003fff,0xdb800000-0xdb8007ff irq 17 at device 7.0 on pci0 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:e0:18:00:00:03:80:fa fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:e0:18:03:80:fa fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) uhci0: <VIA 83C572 USB controller> port 0xa800-0xa81f irq 19 at device 9.0 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xa400-0xa41f irq 16 at device 9.1 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 9.2 (no driver attached) rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xda000000-0xda0000ff irq 16 at device 13.0 on pci0 rl0: Ethernet address: 00:06:4f:02:1c:ed miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl1: <RealTek 8139 10/100BaseTX> port 0x9800-0x98ff mem 0xd9800000-0xd98000ff irq 17 at device 14.0 on pci0 rl1: Ethernet address: 00:e0:7d:02:1c:de miibus1: <MII bus> on rl1 rlphy1: <RealTek internal media interface> on miibus1 rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcm1: <Yamaha DS-1E (YMF744)> port 0x9000-0x9003,0x9400-0x943f mem 0xd9000000-0xd9007fff irq 18 at device 15.0 on pci0 pcm1: <SigmaTel STAC9708/11 AC97 Codec> sym0: <875> port 0x8800-0x88ff mem 0xd8000000-0xd8000fff,0xd8800000-0xd88000ff irq 19 at device 16.0 on pci0 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <VIA 8233A UDMA133 controller> port 0x8400-0x840f at device 17.1 on pci0 ata0: at 0x1f0 irq 14 on atapci1 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci1 ata1: [MPSAFE] uhci2: <VIA 83C572 USB controller> port 0x8000-0x801f irq 21 at device 17.2 on pci0 usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <VIA 83C572 USB controller> port 0x7800-0x781f irq 21 at device 17.3 on pci0 usb3: <VIA 83C572 USB controller> on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 ppbus0: IEEE1284 device found /NIBBLE/ECP Probing for PnP devices on ppbus0: ppbus0: <Hewlett-Packard OfficeJet Series 700.4.04c> MLC,PCL,PML plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pmtimer0 on isa0 orm0: <Option ROMs> at iomem 0xcc000-0xd47ff,0xc0000-0xc8fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1535213941 Hz quality 800 Timecounters tick every 10.000 msec ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default IPv6 packet filtering initialized, unlimited logging GEOM: create disk ad0 dp=0xc662ed60 ad0: 117800MB <IC35L120AVV207-0> [239340/16/63] at ata0-master UDMA100 acd0: CDRW <20X10> at ata1-slave WDMA2 GEOM: create disk ad4 dp=0xc662e960 ad4: 114440MB <IC35L120AVV207-0> [232514/16/63] at ata2-master UDMA100 GEOM: create disk ar0 dp=0xc6502de0 ar0: 114440MB <ATA RAID0 array> [14589/255/63] status: READY subdisks: disk0 READY on ad4 at ata2-master Waiting 15 seconds for SCSI devices to settle GEOM: create disk cd0 dp=0xc64bc600 GEOM: create disk cd1 dp=0xc64be600 cd1 at ata1 bus 0 target 1 lun 0 cd1: <ATAPI CD-R/RW 20X10 H.DH> Removable CD-ROM SCSI-0 device cd1: 16.000MB/s transfers cd1: Attempt to query device size failed: NOT READY, Medium not present cd0 at sym0 bus 0 target 2 lun 0 cd0: <PIONEER DVD-ROM DVD-303 1.09> Removable CD-ROM SCSI-2 device cd0: 20.000MB/s transfers (20.000MHz, offset 8) cd0: Attempt to query device size failed: NOT READY, Medium not present Mounting root from ufs:/dev/ad0s1a drm0: [MPSAFE] Warning: pid 1420 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 1420 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 1420 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 1420 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 1420 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 1420 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 1420 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 1420 used static ldt allocation. See the i386_set_ldt man page for more info Warning: pid 1420 used static ldt allocation. See the i386_set_ldt man page for more info pid 29830 (gpgsm), uid 1001: exited on signal 10 (core dumped) ad4: WARNING - WRITE_DMA recovered from missing interrupt ad4: WARNING - WRITE_DMA recovered from missing interrupt ad4: WARNING - WRITE_DMA recovered from missing interrupt ad4: WARNING - WRITE_DMA recovered from missing interrupt ad4: WARNING - WRITE_DMA recovered from missing interrupt ad4: WARNING - WRITE_DMA recovered from missing interrupt ad4: WARNING - WRITE_DMA recovered from missing interrupt ad4: WARNING - WRITE_DMA recovered from missing interrupt ad4: WARNING - READ_DMA recovered from missing interrupt ---->8----- tower: dmesg ---->8---- Andy
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040109085601.20479.qmail>