Date: Thu, 15 Jan 2004 09:58:39 +0900 From: UEDA Hiroyuki <ueda@netforest.ad.jp> To: freebsd-stable@freebsd.org Subject: Re: Dell PE600SC with ServerWorks CSB6 Message-ID: <20040115094617.DC85.UEDA@netforest.ad.jp> In-Reply-To: <40055924.5020905@typhoon.co.jp> References: <40055924.5020905@typhoon.co.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
> Hello!
>
> Has anyone gotten 4.9R to recognize the "ServerWorks CSB6" ATA
> controller on a Dell 600SC? How about installing 5.2R on a 600SC? 5.2R
> recognizes the said controller, but it corrupts data.
We are using Dell 600SC with ServerWorks CSB6 for FreeBSD
5.1-RELEASE-p11. The machine's dmesg is here:
-----
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE-p11 #1: Wed Jan 7 19:00:21 JST 2004
ishikawa@eir.netforest.co.jp:/usr/src/sys/i386/compile/EIR
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0454000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04541f4.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 2399340052 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2399.34-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 1073676288 (1023 MB)
avail memory = 1038413824 (990 MB)
pnpbios: Bad PnP BIOS data checksum
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE600SC > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00fc2c0
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.5.31> port 0xecc0-0xecff mem 0xfe100000-0xfe11ffff irq 10 at device 2.0 on pci0
em0: Speed:100 Mbps Duplex:Full
ahc0: <Adaptec 3960D Ultra160 SCSI adapter> port 0xe800-0xe8ff mem 0xfe123000-0xfe123fff irq 5 at device 6.0 on pci0
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec 3960D Ultra160 SCSI adapter> port 0xe400-0xe4ff mem 0xfe122000-0xfe122fff irq 10 at device 6.1 on pci0
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
pci0: <display, VGA> at device 8.0 (no driver attached)
atapci0: <ServerWorks CSB6 UDMA100 controller> port 0x8b0-0x8bf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at device 15.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 15.3 on pci0
isa0: <ISA bus> on isab0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 1 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <Option ROMs> at iomem 0xec000-0xeffff,0xe3000-0xea7ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
IP Filter: v3.4.31 initialized. Default = block all, Logging = enabled
ad0: 38146MB <ST340014A> [77504/16/63] at ata0-master UDMA100
ad2: 38146MB <ST340014A> [77504/16/63] at ata1-master UDMA100
ar0: 38146MB <ATA RAID1 array> [4862/255/63] status: READY subdisks:
disk0 READY on ad0 at ata0-master
disk1 READY on ad2 at ata1-master
Waiting 5 seconds for SCSI devices to settle
Opened disk ad0 -> 1
Opened disk ad0 -> 1
Opened disk ad0 -> 1
Opened disk ad0 -> 1
Opened disk ad2 -> 1
Opened disk ad2 -> 1
sa0 at ahc0 bus 0 target 6 lun 0
sa0: <ARCHIVE Python 06408-XXX 9100> Removable Sequential Access SCSI-3 device
sa0: 80.000MB/s transfers (40.000MHz, offset 32, 16bit)
Mounting root from ufs:/dev/ar0s1a
IP Filter: already initialized
IP Filter: already initialized
-----
The machine has 2 IDE disk which are connected to different channel
for ataraid of FreeBSD.
We could not install both 4.9R and 5.1R-p11 when first try, but we
found that we could install without CD-ROM drive :-).
-----
UEDA Hiroyuki <ueda@netforest.ad.jp>
Net Forest Inc., JAPAN
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040115094617.DC85.UEDA>