Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 18 Jan 2004 22:32:09 -0800
From:      John Kennedy <jk@jk.homeunix.net>
To:        freebsd-current@freebsd.org
Subject:   Shuttle SB75G2
Message-ID:  <20040119063209.GA27591@memnoch.jk.homeunix.net>

next in thread | raw e-mail | index | archive | help

--HcAYCG3uE/tztfnV
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

  I'm trying to load FreeBSD on this (new) system -- 4.9 and 5.2 (release,
not current).  As something of a test case, I also loaded XP pro on it.
It obviously isn't working yet and I'm starting the process of figuring out
why.

  The system works well enough to load, boot and install 4.9 and 5.2.  I
can't get it to stay up long enough to recompile the OS (dies during
buildworld).  When the system dies, it tends to freeze or reboot.  Once, it
looked like it may have double-faulted (haven't chased that one down yet).

  I tried a few things.  I tested with APIC and HT disabled.  Under 5.2, I
booted up with various options (safe, default, and APIC disabled).  The
safe mode was where I saw what looked like the double-fault.

  Given the double-fault, I figured that I might have some bad memory.  I
tried changing the timings a bit and then ultimately ran the Memtest86 ISO
and let it run for a few hours and it didn't find any problems with the
default settings.

  XP hasn't had any problems, but it really hasn't had any kind of workout
comparable to the buildworld.

  IRQs are a little shared, but I don't know where the pitfalls are there.

  [sorted, stripped a bit]
		ioapic0 <Version 2.0> irqs 0-23 on motherboard
	1	atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
	1	atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
	3	sio1 port 0x2f8-0x2ff irq 3 on acpi0
	4	sio0 port 0x3f8-0x3ff irq 4 on acpi0
	6	fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> irq 6 drq 2 on acpi0
	7	ppc0 port 0x378-0x37f irq 7 on acpi0
	12	psm0: <PS/2 Mouse> irq 12 on atkbdc0
	14	ata0: at 0x1f0 irq 14 on atapci0
	15	ata1: at 0x170 irq 15 on atapci0
	16	pcib1: slot 0 INTA is routed to irq 16
	16	uhci0: <Intel 82801EB (ICH5) USB controller USB-A> irq 16 at device 29.0 on pci0
	16	uhci3: <Intel 82801EB (ICH5) USB controller USB-D> irq 16 at device 29.3 on pci0
	18	fwohci0: <VIA VT6306> irq 18 at device 6.0 on pci2
	18	uhci2: <Intel 82801EB (ICH5) USB controller USB-C> irq 18 at device 29.2 on pci0
	19	bge0: <Broadcom BCM5788 Gigabit Ethernet, ASIC rev. 0x3003> irq 19 at device 7.0 on pci2
	19	uhci1: <Intel 82801EB (ICH5) USB controller USB-B> irq 19 at device 29.1 on pci0

  Anybody had previous experience with this hardware or care to steer me at
anything?  Left to my own devices, I'm going to try and get it to lock up
(rather than reboot) and see if it'll tell me where.  All but one of the
lockups seemed pretty hard (no response from keyboard, not even buffering).

--HcAYCG3uE/tztfnV
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg-4.9"

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE #0: Mon Oct 27 17:51:09 GMT 2003
    root@freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3207.29-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 1073676288 (1048512K bytes)
avail memory = 1039691776 (1015324K bytes)
Preloaded elf kernel "kernel" at 0xc053f000.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fded0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82875P host to AGP bridge> mem 0xf0000000-0xf3ffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=2579)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4e48 graphics accelerator> at 0.0 irq 10
pci1: <ATI model 4e68 graphics accelerator> at 0.1
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xcc00-0xcc1f irq 10 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xc000-0xc01f irq 11 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xc400-0xc41f irq 9 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
umass0: LEXR PLUG DRIVE LEXR PLUG DRIVE, rev 1.10/0.01, addr 2
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xc800-0xc81f irq 10 at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <USB controller> at 29.7 irq 11
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
fwohci0: <VIA VT6306> port 0xb000-0xb07f mem 0xf7010000-0xf70107ff irq 9 at device 6.0 on pci2
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 8.
fwohci0: EUI64 00:30:1b:b1:00:00:f6:6c
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
if_fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:30:1b:00:f6:6c
sbp0: <SBP2/SCSI over firewire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci2: <unknown card> (vendor=0x14e4, dev=0x169c) at 7.0 irq 11
isab0: <PCI to ISA bridge (vendor=8086 device=24d0)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 ATA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x24d3) at 31.3 irq 5
pci0: <unknown card> (vendor=0x8086, dev=0x24d5) at 31.5 irq 5
orm0: <Option ROMs> at iomem 0xc0000-0xccfff,0xd0000-0xd7fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ad0: 114473MB <WDC WD1200JB-00EVA0> [232581/16/63] at ata0-master UDMA100
acd0: DVD-ROM <SONY DVD-ROM DDU1612> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s3a
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <LEXAR DIGITAL FILM /W1.> Removable Direct Access SCSI-2 device 
da0: 650KB/s transfers
da0: 123MB (251904 512 byte sectors: 64H 32S/T 123C)
can't re-use a leaf (firewire_debug)!
can't re-use a leaf (fwmem_debug)!
module_register: module fwohci/firewire already exists!
linker_file_sysinit "firewire.ko" failed to register! 17

--HcAYCG3uE/tztfnV
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg-5.2"

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2-RELEASE #0: Sun Jan 11 04:21:45 GMT 2004
    root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a33000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a331f4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3207.29-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 1073676288 (1023 MB)
avail memory = 1033510912 (985 MB)
ACPI APIC Table: <XPC    AWRDACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <XPC    AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00fded0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82875P host to AGP bridge> mem 0xf0000000-0xf3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 16
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xcc00-0xcc1f irq 16 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xc000-0xc01f irq 19 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xc400-0xc41f irq 18 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xc800-0xc81f irq 16 at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
fwohci0: <VIA VT6306> port 0xb000-0xb07f mem 0xf7010000-0xf70107ff irq 18 at device 6.0 on pci2
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 8.
fwohci0: EUI64 00:30:1b:b1:00:00:f6:6c
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:30:1b:00:f6:6c
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
bge0: <Broadcom BCM5788 Gigabit Ethernet, ASIC rev. 0x3003> mem 0xf7000000-0xf700ffff irq 19 at device 7.0 on pci2
bge0: Ethernet address: 00:30:1b:b1:f6:08
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
orm0: <Option ROMs> at iomem 0xd0000-0xd7fff,0xc0000-0xccfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc6a9b660
ad0: 114473MB <WDC WD1200JB-00EVA0> [232581/16/63] at ata0-master UDMA100
acd0: DVDROM <SONY DVD-ROM DDU1612> at ata1-master PIO4
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad0s4a
WARNING: / was not properly dismounted
WARNING: /h was not properly dismounted
WARNING: /home was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
/usr: mount pending error: blocks 84 files 2
/usr: superblock summary recomputed
WARNING: /var was not properly dismounted
umass0: LEXR PLUG DRIVE LEXR PLUG DRIVE, rev 1.10/0.01, addr 2
GEOM: create disk da0 dp=0xc6999450
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <LEXAR DIGITAL FILM /W1.> Removable Direct Access SCSI-2 device 
da0: 1.000MB/s transfers
da0: 123MB (251904 512 byte sectors: 64H 32S/T 123C)

--HcAYCG3uE/tztfnV--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040119063209.GA27591>