Date: Thu, 22 Jan 2004 16:55:29 +0100 From: dada@sbox.tugraz.at To: freebsd-gnats-submit@FreeBSD.org Subject: kern/61733: panic: resource_list_release: resource entry is not busy Message-ID: <20040122165529.u9q1w0ggwo444w04@webmail.tugraz.at> Resent-Message-ID: <200401221600.i0MG0Uwl084824@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 61733 >Category: kern >Synopsis: panic: resource_list_release: resource entry is not busy >Confidential: no >Severity: serious >Priority: high >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Thu Jan 22 08:00:30 PST 2004 >Closed-Date: >Last-Modified: >Originator: Martin Kammerhofer >Release: FreeBSD 5.2-RELEASE i386 >Organization: Graz University >Environment: FreeBSD 5.2-RELEASE #0: Sun Jan 11 04:37:35 GMT 2004 root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/BOOTMFS >Description: Kernel panics when probing 3COM ISA NIC: Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/kernel]... Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-RELEASE #0: Sun Jan 11 04:37:35 GMT 2004 root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/BOOTMFS Preloaded elf kernel "/kernel" at 0xc0b05000. Preloaded mfs_root "/mfsroot" at 0xc0b050a8. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: i486DX (486-class CPU) real memory = 16777216 (16 MB) avail memory = 7131136 (6 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface isa0: <ISA bus> on motherboard orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0 ata0: [MPSAFE] ata1 at port 0x376,0x170-0x177 irq 15 on isa0 ata1: [MPSAFE] atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 fdc0: <NEC 765 or clone> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16450, console sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16450 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ep0: <3Com 3C509-Combo EtherLink III> at port 0x300-0x30f irq 10 on isa0 ep0: eeprom failed to come ready. ep0: ep_alloc() failed! (6) panic: resource_list_release: resource entry is not busy cpuid = 0; Uptime: 1s Automatic reboot in 15 seconds - press a key on the console to abort --> Press a key on the console to reboot, --> or switch off the system now. The rather old 3COM card actually gets probed twice as ep0 (bogus) and ep1 (working). Below is a copy of dmesg(8) output from the same hardware, but running a 4.9-STABLE kernel - where it doesn't panic :-) Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.9-STABLE #1: Mon Jan 5 14:43:09 CET 2004 toor@Martin.liebt.Susi:/usr/obj/usr/src/sys/VLB486 Timecounter "i8254" frequency 1193182 Hz CPU: i486DX (486-class CPU) real memory = 16777216 (16384K bytes) config> enable sio2 config> irq sio2 11 config> ls Device port irq drq iomem iosize unit flags enab fdc0 0x3f0 6 2 0 0 0 0 Yes fd0 0 0 0 0 0 0 0 Yes ata0 0x1f0 14 0 0 0 0 0 Yes ata1 0x170 15 0 0 0 1 0 Yes atkbdc0 0x60 0 0 0 0 0 0 Yes atkbd0 0 1 0 0 0 0 0x1 Yes vga0 0 0 0 0 0 0 0 Yes sc0 0 0 0 0 0 0 0x100 Yes npx0 0xf0 13 0 0 0 0 0 Yes sio0 0x3f8 4 0 0 0 0 0x10 Yes sio1 0x2f8 3 0 0 0 1 0x80 Yes sio2 0x3e8 11 0 0 0 2 0 Yes sio3 0x2e8 9 0 0 0 3 0 No sbc0 0x220 5 1 0 0 0 0x15 Yes ppc0 0 7 0 0 0 0 0 Yes sio1: gdb debugging port avail memory = 13713408 (13392K bytes) Preloaded elf kernel "kernel" at 0xc02d4000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc02d409c. npx0: <math processor> on motherboard npx0: INT 16 interface isa0: <ISA bus> on motherboard orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 pmtimer0 on isa0 ep0: <3Com 3C509-Combo EtherLink III> at port 0x300-0x30f irq 10 on isa0 ep0: eeprom failed to come ready. ep0: eeprom failed to come ready. ep0: eeprom failed to come ready. ep0: eeprom failed to come ready. ep0: eeprom failed to come ready. ep0: Ethernet address 00:00:00:00:00:00 fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata1 at port 0x170-0x177,0x376 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16450, console sio1 at port 0x2f8-0x2ff irq 3 flags 0x80 on isa0 sio1: type 16450 sio2 at port 0x3e8-0x3ef irq 11 drq 0 on isa0 sio2: type 16550A sbc0: <SoundBlaster 16> at port 0x220-0x22f irq 5 drq 1 flags 0x15 on isa0 pcm0: <SB16 DSP 4.13> on sbc0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ep1: <3Com 3C509B-Combo EtherLink III (PnP)> at port 0x210-0x21f irq 9 on isa0 ep1: Ethernet address 00:a0:24:44:81:eb ad0: 329MB <Maxtor 7345 AT> [790/15/57] at ata0-master BIOSPIO ad1: 408MB <ST3491A-XR> [899/15/62] at ata0-slave BIOSPIO acd0: CDROM <CDA66801I> at ata1-slave BIOSPIO Mounting root from ufs:/dev/ad1s1a >How-To-Repeat: Boot 5.2 with those NIC. >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040122165529.u9q1w0ggwo444w04>