Date: Fri, 23 Jan 2004 13:50:40 +0100 From: Bogdan TARU <bgd@icomag.de> To: freebsd-hackers@freebsd.org Subject: 4.9 kernel panics on a poweredge 2650 Message-ID: <20040123125040.GA42187@icomag.de>
next in thread | raw e-mail | index | archive | help
Hi hackers, I am experiencing kernel panics on a poweredge 2650 each day around 3am (usually the machine comes up at 3:04am). The kernel panics are reproductable by running: /etc/periodic/security/100.chksetuid (in fact by runnning find on /usr with -perms). The problem lies somewhere in /usr/ports. Deleting the /usr/ports tree doesn't solve it, trying a cvs up of /usr/ports results in a crash again. I googled around a lil' bit, and found: http://lists.freebsd.org/pipermail/freebsd-hackers/2003-April/000192.html, and also Terry's answer, but that addresses freebsd 4.7. But my box is running 4.9-release, and the systems was cleanly installed with 4.9 from the very beginning, so not upgraded from 4.7 or any other previous version. The dmesg looks like: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.9-RELEASE #1: Mon Nov 17 23:47:49 CET 2003 root@:/usr/src/sys/compile/saturn Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 1790761584 Hz CPU: Intel(R) Xeon(TM) CPU 1.80GHz (1790.76-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 2147418112 (2097088K bytes) avail memory = 2088136704 (2039196K bytes) Preloaded elf kernel "kernel" at 0xc0312000. Warning: Pentium 4 CPU: PSE disabled Pentium Pro MTRR support enabled Using $PIR table, 9 entries at 0xc00fc430 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pci0: <unknown card> (vendor=0x1028, dev=0x000c) at 4.0 irq 11 pci0: <unknown card> (vendor=0x1028, dev=0x0008) at 4.1 irq 10 pci0: <unknown card> (vendor=0x1028, dev=0x000d) at 4.2 irq 7 pci0: <ATI Mach64-GR graphics accelerator> at 14.0 atapci0: <ServerWorks CSB5 ATA100 controller> port 0x8b0-0x8bf,0x8d8-0x8db,0x8d0-0x8d7,0x8c8-0x8cb,0x8c0-0x8c7 at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <OHCI USB controller> at 15.2 irq 5 isab0: <PCI to ISA bridge (vendor=1166 device=0225)> at device 15.3 on pci0 isa0: <ISA bus> on isab0 pcib1: <Host to PCI bridge> on motherboard pci1: <PCI bus> on pcib1 pcib2: <Host to PCI bridge> on motherboard pci2: <PCI bus> on pcib2 pcib3: <Host to PCI bridge> on motherboard pci3: <PCI bus> on pcib3 bge0: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xfcf10000-0xfcf1ffff irq 11 at device 6.0 on pci3 bge0: Ethernet address: 00:06:5b:f6:48:38 miibus0: <MII bus> on bge0 brgphy0: <BCM5701 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xfcf00000-0xfcf0ffff irq 10 at device 8.0 on pci3 bge1: Ethernet address: 00:06:5b:f6:48:39 miibus1: <MII bus> on bge1 brgphy1: <BCM5701 10/100/1000baseTX PHY> on miibus1 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xfcf00000-0xfcf0ffff irq 10 at device 8.0 on pci3 bge1: Ethernet address: 00:06:5b:f6:48:39 miibus1: <MII bus> on bge1 brgphy1: <BCM5701 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto pcib4: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard pci4: <PCI bus> on pcib4 pcib8: <PCI to PCI bridge (vendor=8086 device=0309)> at device 8.0 on pci4 pci5: <PCI bus> on pcib8 pci5: <unknown card> (vendor=0x9005, dev=0x00c5) at 6.0 irq 7 pci5: <unknown card> (vendor=0x9005, dev=0x00c5) at 6.1 irq 11 aac0: <Dell PERC 3/Di> mem 0xf0000000-0xf7ffffff irq 7 at device 8.1 on pci4 aac0: i960RX 100MHz, 118MB cache memory, optional battery present aac0: Kernel 2.7-1, Build 3170, S/N 5010d3 aac0: Supported Options=75c<WCACHE,DATA64,HOSTTIME,WINDOW4GB,SOFTERR,NORECOND,SGMAP64> pcib5: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard pci6: <PCI bus> on pcib5 pcib6: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard pci7: <PCI bus> on pcib6 pcib7: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard pci8: <PCI bus> on pcib7 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xec000-0xeffff on isa0 pmtimer0 on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A IP Filter: v3.4.31 initialized. Default = pass all, Logging = disabled ata0-slave: ATAPI identify retries exceeded acd0: CDROM <TEAC CD-ROM CD-224E> at ata0-master PIO4 aacd0: <RAID 0/1> on aac0 aacd0: 139997MB (286714368 sectors) Any ideas? Thank you, bogdan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040123125040.GA42187>