Date: Tue, 20 Apr 2004 12:17:32 -0400 (EDT) From: "Marius M. Rex MARIUS" <marius@mail.communityconnect.com> To: stable@freebsd.org Subject: Diagnosing hardware issue? Message-ID: <20040420114659.R17412@Daath.hq.communityconnect.com>
next in thread | raw e-mail | index | archive | help
I recently inherited a dual processor x86 machine for my personal use. It
was supposed to be in fine working condition as a MS-Windows machine, but upon
installing FreeBSD, I have encountered a number of problems I have no
doubt that the hardware is the issue, and not FreeBSD.
I did a minimal install over the network of 4.7-Release which seemed to go
smoothly. I then tarred up my a 4.9 stable source tree from another
machine and transfered it over to the new box. (from March 30th) Build
world seemed to go fine. (make buildworld) I tweaked the GENERIC kernel to add support for
the second processor and a sound card. I made and installed the new
kernel without any noticeable errors. (make builkernel KERNCONF=STONE ;
make installkernel KERNCONF=STONE) The new kernel booted, but the
second processor was not recognized. Likewise, my network cards became
unresponsive. (the interfaces would just time out) I now have the machine
in serial console, and am wondering how I figure out what is wrong with the
machine. I assume it is a hardware issue, but as to what is precisely broken,
I do not know. For completeness sake I did the installworld and ran
mergmaster, but I am still running on only one processor and no
networking.
Can anyone give me some pointers on how to start troubleshooting this?
The source tree I used seems to work fine on my laptop, so I have doubt
that it is a terrible problem on the other machine.
Here is some basic info to give a little background:
######################################
stone# uname -a
FreeBSD stone.ny.home 4.9-STABLE FreeBSD 4.9-STABLE #1: Mon Apr 19
21:42:50 EDT6
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-STABLE #1: Mon Apr 19 21:42:50 EDT 2004
root@stone.ny.home:/usr/obj/usr/src/sys/STONE
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,MMX,FXSR>
real memory = 134152192 (131008K bytes)
avail memory = 126550016 (123584K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
IOAPIC #0 intpin 16 -> irq 10
IOAPIC #0 intpin 17 -> irq 11
FreeBSD/SMP: Multiprocessor motherboard: 1 CPUs
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc03f1000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem
0xf8000000-0xfbffffff at d
evice 0.0 on pci0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GB graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xef80-0xef9f irq 11
at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Timecounter "PIIX" frequency 3579545 Hz
chip0: <Intel 82371AB Power management controller> port 0x440-0x44f at
device 7.3 on pci0
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xe800-0xe8ff mem
0xfebff000-0xfebfffff irq 10 at device 15.0 on pci0
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xef00-0xef3f mem
0xfea00000-0xfeaffff
f,0xfebfe000-0xfebfefff irq 11 at device 18.0 on pci0
fxp0: Ethernet address 00:90:27:8a:80:53
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: <82c169 PNIC 10/100BaseTX> port 0xe400-0xe4ff mem
0xfebfdf00-0xfebfdfff irq
11 at device 20.0 on pci0
dc0: Ethernet address: 00:a0:cc:65:b8:e7
miibus1: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xcc7ff,0xcc800-0xcd7ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pcm0: <Yamaha OPL-SAx> at port
0x220-0x22f,0x530-0x537,0x388-0x38b,0x330-0x331,0
x370-0x371 irq 5 drq 0,1 on isa0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
ad0: 8063MB <WDC AC28400R> [16383/16/63] at ata0-master UDMA33
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST39103LW 0002> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing
Enabled
da1: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST39204LW 0002> Fixed Direct Access SCSI-3 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing
Enabled
da0: 8750MB (17921835 512 byte sectors: 255H 63S/T 1115C)
cd0 at ahc0 bus 0 target 6 lun 0
cd0: <TOSHIBA CD-ROM XM-6401TA 1009> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
stone# mptable
===============================================================================
MPTable, version 2.0.15
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000fb4f0
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x0d
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x000f2460
signature: 'PCMP'
base table length: 264
version: 1.4
checksum: 0x48
OEM ID: 'INTEL '
Product ID: '440BX '
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 26
local APIC address: 0xfee00000
extended table length: 16
extended table checksum: 234
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step
Flags
0 0x11 BSP, usable 6 5 2
0x183fb
ff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 ISA
--
I/O APICs: APIC ID Version State Address
2 0x11 usable 0xfec00000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID
PIN#
ExtINT conforms conforms 2 0 2
0
INT conforms conforms 2 1 2
1
INT conforms conforms 2 0 2
2
INT conforms conforms 2 3 2
3
INT conforms conforms 2 4 2
4
INT conforms conforms 2 5 2
5
INT conforms conforms 2 6 2
6
INT conforms conforms 2 7 2
7
INT active-hi edge 2 8 2
8
INT conforms conforms 2 9 2
9
INT conforms conforms 2 12 2
12
INT conforms conforms 2 13 2
13
INT conforms conforms 2 14 2
14
INT conforms conforms 2 15 2
15
INT active-lo level 2 10 2
16
INT active-lo level 2 11 2
17
INT active-lo level 2 11 2
18
INT active-lo level 2 11 2
19
SMI conforms conforms 2 0 2
23
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID
PIN#
ExtINT conforms conforms 0 0:A 255
0
NMI conforms conforms 0 0:A 255
1
-------------------------------------------------------------------------------
MP Config Extended Table Entries:
Extended Table HOSED!
####################################
And yes, I imagine that 'Extended Table HOSED!' is NOT a good sign.
-Marius M. Rex
marius@mail.communityconnect.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040420114659.R17412>