Date: Thu, 3 Jun 2004 11:17:22 +0000 From: <a.shterenlikht@umist.ac.uk> To: freebsd-questions@freebsd.org Subject: pccard modem Message-ID: <200406031117.22331.a.shterenlikht@umist.ac.uk>
next in thread | raw e-mail | index | archive | help
Hi I recently installed FreeBSD 5.2.1 on Compaq Armada 1700. I have a=20 pcmcia modem (Psion gold card WAN Global PC Card 56 k+ Fax Combine iT). 1. Is this not a winmodem? 2. How do I make it work? I'm not sure if it is detected or not. I get=20 the lines sio4: <Psion Gold Card 56K Combine iT> at port 0x2f8-0x2ff irq 11=20 function 0 config 5 on pccard0 sio4: type 16550A sio4: unable to activate interrupt in fast mode - using normal mode from the dmesg. Does it mean the card is properly detected. 3. If it is detected, do I need to start a daemon for it? 4. What is the recommended way to check that the card is working thanks anton full dmesg output: ------------------- Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights=20 reserved. FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004 root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc09e3000. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium II/Pentium II Xeon/Celeron (233.34-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x652 Stepping =3D 2 =20 Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,= CMOV,PAT,PSE36,MMX,FXSR> real memory =3D 167739392 (159 MB) avail memory =3D 153321472 (146 MB) Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> at pcibus 0 on=20 motherboard pci0: <PCI bus> on pcib0 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1020-0x102f at device=20 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1000-0x101f irq=20 11 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered piix0: <PIIX Timecounter> port 0xd00-0xd0f at device 7.3 on pci0 Timecounter "PIIX" frequency 3579545 Hz quality 0 pci0: <display, VGA> at device 8.0 (no driver attached) cbb0: <TI1220 PCI-CardBus Bridge> mem 0x7fffe000-0x7fffefff irq 11 at=20 device 17.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb1: <TI1220 PCI-CardBus Bridge> mem 0x7ffff000-0x7fffffff irq 11 at=20 device 17.1 on pci0 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] orm0: <Option ROM> at iomem 0xc0000-0xcafff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port=20 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on=20 isa0 unknown: <PNP0401> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0511> can't assign resources (irq) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0303> can't assign resources (port) unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0c02> can't assign resources (port) Timecounter "TSC" frequency 233342652 Hz quality 800 Timecounters tick every 10.000 msec sio4: <Psion Gold Card 56K Combine iT> at port 0x2f8-0x2ff irq 11=20 function 0 config 5 on pccard0 sio4: type 16550A sio4: unable to activate interrupt in fast mode - using normal mode rl0: <RealTek 8139 10/100BaseTX> port 0x1100-0x11ff mem=20 0x88001000-0x880011ff irq 11 at device 0.0 on cardbus1 rl0: Ethernet address: 00:02:44:7b:52:b8 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto GEOM: create disk ad0 dp=3D0xc23f3460 ad0: 3102MB <IBM-DKLA-23240> [6304/16/63] at ata0-master UDMA33 acd0: CDROM <UJDA150> at ata0-slave PIO4 Mounting root from ufs:/dev/ad0s1a --=20 Dr Anton Shterenlikht Research Associate Manchester Materials Science Centre University of Manchester and UMIST Grosvenor Street Manchester M1 7HS UK Tel: +44(0)161 2008959 Fax: +44(0)161 2003586
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200406031117.22331.a.shterenlikht>