Date: Fri, 11 Jun 2004 14:09:48 -0300 (ADT) From: "Marc G. Fournier" <scrappy@hub.org> To: freebsd-current@freebsd.org Subject: How to enable HTT under 5-CURRENT ... ? Message-ID: <20040610164703.O907@ganymede.hub.org>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] 'k, I'm lost ... checked through the NOTES kernel config, to make sure that I wasn't missing anything, and I don't think I am ... My CPU comes up as supporting HTT: CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2393.19-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> I have ACPI enabled in the BIOS ... I tried setting cpu_idle_hlt to 0 in /etc/sysctl.conf, which I *thought* was what I needed to do, but it states: Jun 10 16:20:40 ganymede root: /etc/rc.d/sysctl: WARNING: sysctl machdep.cpu_idle_hlt: does not exist. where the following tells me that it does: ganymede# sysctl machdep.cpu_idle_hlt machdep.cpu_idle_hlt: 1 Attached are my dmesg.out for the machine, as well as my kernel config file ... am I missing a setting here somewhere? ---- Marc G. Fournier Hub.Org Networking Services (http://www.hub.org) Email: scrappy@hub.org Yahoo!: yscrappy ICQ: 7615664 [-- Attachment #2 --] Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #10: Fri Jun 11 12:50:25 ADT 2004 root@ganymede.hub.org:/shared/obj/usr/src/sys/kernel Preloaded elf kernel "/boot/kernel/kernel" at 0xc0759000. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc07591f4. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc07592a0. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc075934c. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2393.19-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 536805376 (511 MB) avail memory = 519806976 (495 MB) ACPI APIC Table: <AOpen AWRDACPI> ioapic0 <Version 2.0> irqs 0-23 on motherboard random: <entropy source, Software, Yarrow> Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <AOpen AWRDACPI> on motherboard acpi0: [GIANT-LOCKED] pcibios: BIOS version 2.10 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82845 host to AGP bridge> mem 0xd8000000-0xdbffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib1: slot 0 INTA is routed to irq 16 pci1: <display, VGA> at device 0.0 (no driver attached) pci0: <serial bus, USB> at device 29.0 (no driver attached) pci0: <serial bus, USB> at device 29.1 (no driver attached) pci0: <serial bus, USB> at device 29.2 (no driver attached) pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 ahc0: <Adaptec 2940A Ultra SCSI adapter> port 0xc000-0xc0ff mem 0xdf100000-0xdf100fff irq 18 at device 10.0 on pci2 ahc0: [GIANT-LOCKED] aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs fxp0: <Intel 82557 Pro/100 Ethernet> port 0xc400-0xc41f mem 0xdf000000-0xdf0fffff,0xe0000000-0xe0000fff irq 21 at device 11.0 on pci2 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:a0:c9:af:0f:58 fxp0: [GIANT-LOCKED] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel ICH4 (82801DB)> port 0xe400-0xe43f,0xe000-0xe0ff mem 0xe0102000-0xe01020ff,0xe0101000-0xe01011ff irq 17 at device 31.5 on pci0 pcm0: [GIANT-LOCKED] pcm0: <Avance Logic ALC650 AC97 Codec> fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 orm0: <Option ROM> at iomem 0xd0000-0xd07ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2393191264 Hz quality 800 Timecounters tick every 10.000 msec ad0: 38166MB <WDC WD400JB-00ENA0> [77545/16/63] at ata0-master UDMA100 ad1: 76319MB <WDC WD800JB-00ETA0> [155061/16/63] at ata0-slave UDMA100 Waiting 2 seconds for SCSI devices to settle cd0 at ahc0 bus 0 target 1 lun 0 cd0: <YAMAHA CRW2200S 1.0D> Removable CD-ROM SCSI-2 device cd0: 20.000MB/s transfers (20.000MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed Mounting root from ufs:/dev/ad0s1a [-- Attachment #3 --] machine i386 cpu I686_CPU ident kernel makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options SCHED_ULE #4BSD scheduler options INET #InterNETworking options FFS #Berkeley Fast Filesystem options SOFTUPDATES #Enable FFS soft updates support options UFS_ACL #Support for access control lists options UFS_DIRHASH #Improve performance on big directories options NFSSERVER #Network Filesystem Server options CD9660 #ISO 9660 Filesystem options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options SMP # Symmetric MultiProcessor Kernel device apic device isa device pci device fdc device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives options ATA_STATIC_ID #Static device numbering device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver device splash # Splash screen and screen saver support device sc device agp # support several AGP chipsets device npx device scbus # SCSI bus (required for SCSI) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) device ahc # AHA2940 and onboard AIC7xxx devices device miibus # MII bus support device fxp # Intel EtherExpress PRO/100B (82557, 82558) device rl # RealTek 8129/8139 device random # Entropy device device loop # Network loopback device ether # Ethernet support device pty # Pseudo-ttys (telnet etc) device bpf # Berkeley packet filter options INCLUDE_CONFIG_FILE options DDB #Enable the kernel debugger
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040610164703.O907>