Date: Sun, 22 Aug 2004 17:10:38 -0700 (PDT) From: Doug White <dwhite@gumbysoft.com> To: Joe Marcus Clarke <marcus@marcuscom.com> Cc: current@freebsd.org Subject: Re: Cannot install onto mpt-driven drive Message-ID: <20040822170955.H94593@carver.gumbysoft.com> In-Reply-To: <20040822154204.O94593@carver.gumbysoft.com> References: <1093058259.9940.29.camel@shumai.marcuscom.com> <1093195573.11223.3.camel@shumai.marcuscom.com> <20040822154204.O94593@carver.gumbysoft.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Followup to this -- My PE1750 boots and appears to operate normally with this patch. So at least there's no regression. :-) On Sun, 22 Aug 2004, Doug White wrote: > On Sun, 22 Aug 2004, Joe Marcus Clarke wrote: > > > > > > > I just got a new Dell Precision 360 workstation with an LSILogic SCSI > > > > > > controller: > > > > > > > > > > > > mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xcd00-0xcdff mem > > > > > > 0xfe780000-0xfe79ffff,0xfe760000-0xfe77ffff irq 10 at device 3.0 on pci2 > > > > > > mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xce00-0xceff mem > > > > > > 0xfe7x0000-0xfe7dffff,0xfe7a0000-0xfe7bffff irq 9 at device 3.1 on pci2 > > Hm .. I have a PowerEdge 1750 here, which has the same controller, but it > installed 5.2.1R fine: > > mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xbc00-0xbcff mem > 0xfcb20000-0xfcb2ffff,0xfcb30000-0xfcb3ffff irq 18 at device 5.0 on pci4 > mpt0: [GIANT-LOCKED] > mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xb800-0xb8ff mem > 0xfcb00000-0xfcb0ffff,0xfcb10000-0xfcb1ffff irq 19 at device 5.1 on pci4 > mpt1: [GIANT-LOCKED] > > pciconf -lv info: > > mpt0@pci4:5:0: class=0x010000 card=0x014a1028 chip=0x00301000 rev=0x07 > hdr=0x00 > vendor = 'LSI Logic (Was: Symbios Logic, NCR)' > device = 'LSI53C1020/1030 PCI-X to Ultra320 SCSI Controller' > class = mass storage > subclass = SCSI > > > > No, the problem was definitely the bug I mentioned in my follow-up. I > > have a custom 5.2.1-RELEASE ISO that will work just fine. If you decide > > to upgrade beyond 5.2.1-RELEASE, you will also need to re-patch the > > mpt(4) driver. I'm currently running 5.3-BETA, and it works just fine. > > > > http://www.marcuscom.com/downloads/5.2.1-RELEASE-i386-miniinst.iso > > http://www.marcuscom.com/downloads/mpt.diff > > I'll do a build pass with this patch to make sure there's no regression on > my machine. > > -- Doug White | FreeBSD: The Power to Serve dwhite@gumbysoft.com | www.FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040822170955.H94593>