Date: Tue, 31 Aug 2004 16:40:04 +0200 From: Wilko Bulte <wb@freebie.xs4all.nl> To: ticso@cicely.de Cc: freebsd-alpha@freebsd.org Subject: Re: miata hangs on boot with 5.3-BETA2-alpha-bootonly.iso image Message-ID: <20040831144004.GA58438@freebie.xs4all.nl> In-Reply-To: <20040831143609.GV59909@cicely12.cicely.de> References: <413489F8.2A043E20@fadesa.es> <20040831143609.GV59909@cicely12.cicely.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Aug 31, 2004 at 04:36:10PM +0200, Bernd Walter wrote.. > On Tue, Aug 31, 2004 at 04:23:52PM +0200, José M. Fandiño wrote: > > Hello, > > > > While testing BETA2 the box hangs at xl0 detection. > > > > Below I attach boot output from 5.3-BETA2 and if you > > read the next boot you will see a normal (and successful) > > boot with 5.2.1-RELEASE. > > > > Any idea about the problem? > > (if you need some other info don't hesitate to request it) > > Sound similar to PHK's AS1000A story - and this box has no EISA at all! > But it also has no gap in PCI bus numbering and just hangs instead of > traping. And DES reported something similar on his Miata as well for BETA1. > I would bet that this case has the same cause. > Can you produce a boot -v output please? > > [...] > > isab0: <PCI-ISA bridge> at device 7.0 on pci0 > > isa0: <ISA bus> on isab0 > [...] > > xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x8100-0x817f mem 0x81031000-0x8103107f irq 12 at device 8.0 on pci1 > > miibus1: <MII bus> on xl0 > > xlphy0: <3c905C 10/100 internal PHY> on miibus1 > > xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > xl0: Ethernet address: 00:01:02:1a:20:1c > > xl0: interrupting at CIA irq 12 > > xl0: [GIANT-LOCKED] -- Wilko Bulte wilko@FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040831144004.GA58438>