Skip site navigation (1)Skip section navigation (2)
Date:      Wed,  8 Sep 2004 11:11:23 +0200 (CEST)
From:      Holger Kipp <h.kipp@eurowings.com>
To:        <freebsd-stable@freebsd.org>
Subject:   ACPI Problems on HP Netserver LH3000
Message-ID:  <20040908091123.4AC6A14E253@email.eurowings.com>

next in thread | raw e-mail | index | archive | help
Hello,

I currently try to install FreeBSD 5.3-BETA3 on a LH3000.
Booting from CD does work with ACPI disabled. If enabled,
this is what I get (handcopied from screen, typos are my own):

--------------------------------------------------------------------
ACPI APIC Table: <PTLTD    APIC  >
cpu0 (BSP): APIC ID:0
cpu1 (AP): APIC ID:1

acpi0: <PTLTD HWPC207> on motherboard

ACPI-0347: *** Error: During resolve, Unknown Reference opcode 2d (AE_NOT_CONFIGURED) in 0xc3bf12c0
ACPI-1303: *** Error: Method execution failed [\_SB_.PCIO.ISA_.LINK] (Node 0xc3b04c60), AE_AML_INTERNAL
ACPI-1303: *** Error: Method execution failed [\_SB_.PCI0.INIT] (Node 0xc3aa94a0), AE_AML_INTERNAL
ACPI-1303: *** Error: Method execution failed [\_SB_.PCI0._INI] (Node 0xc3aa9520), AE_AML_INTERNAL

acpi0: Power Button (fixed)
can't fetch resources for \_SB_.PCI0.ISO_.SIO_.LPT_ - AE_AML_INVALID_RESOURCE_TYPE

ACPI link \_SB_PCI0.ISA_.LNKU has invalid irq 9, ignoring

amrd0: <LSILogic MegaRaid logical drive> on amr0
amrd1: <LSILogic ...>

Interrupt Storm detected on "irq5: ohci0"
--------------------------------------------------------------------

Then the system hangs. I omitted some other 'normal looking' entries.
If anything else is needed, please let me know.

Booting without APCI from CD does work, installing FreeBSD also.

Booting from harddisk does not work. After POST the screen goes
blank and displays a single '-'. Is it possible that the BIOS
is loading the initial loader which then can't access the
correct drive through BIOS (eg booting from drive 1 instead of
0 via bios, and the loader then tries to access drive 0)?

It is possible to boot from CD, then selecting root device disk1s1a
via loader and start system from harddisk. (with APCI disabled)

All ideas, suggestions, hints, help welcome.

PhoenixBIOS 4.06.33 PT
HP NetRAID Adapter BIOS VER B.02.04 Nov11, 2002

Regards,
Holger Kipp



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040908091123.4AC6A14E253>