Date: Thu, 16 Sep 2004 10:39:02 -0500 From: kjelderg@sponge.dyndns.org To: freebsd-mobile@freebsd.org Subject: Re:[speedstep] testers wanted (Jochen Gensch) Message-ID: <200409161039.02581.kjelderg@sponge.dyndns.org> In-Reply-To: <20040916120103.3554416A4D1@hub.freebsd.org> References: <20040916120103.3554416A4D1@hub.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
> > I just finished a speedstep driver for p3m and p4m but it's a little bit > > ugly, and worst it would work only with ich chipsets. Even worst, I > > don't have the hardware so I can't test it. > > I don't if I have the correct hardware, but I gave it a try since I have > IBM Thinkpad A30p here with a lot of ICH things inside. But I need some > more input on what data you need... > > Some things... > > System 5.3-BETA4 > > SU NB /:dmesg | grep ICH > uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port > 0x1800-0x181f irq 9 at device 29.0 on pci0 > usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 > uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port > 0x1820-0x183f irq 11 at device 29.1 on pci0 > usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 > uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port > 0x1840-0x185f irq 9 at device 29.2 on pci0 > usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 > fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x8000-0x803f mem > 0xc0200000-0xc0200fff irq 10 at device 8.0 on pci2 > atapci0: <Intel ICH3 UDMA100 controller> port > 0x1860-0x186f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 > pcm0: <Intel ICH3 (82801CA)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 5 at > device 31.5 on pci0 > ichist0: <Intel ICH3m LPC bridge> on motherboard > > > SU NB /:sysctl -a | grep ich > dev.ichist.0.%desc: Intel ICH3m LPC bridge > dev.ichist.0.%driver: ichist > dev.ichist.0.%parent: nexus0 > dev.ichist.0.speedstep: 0 > > > SU NB /:sysctl -a | grep acpi > acpidev 73 3K 3K 73 32 > acpisem 21 2K 2K 21 64 > acpitask 0 0K 1K 290 16,32 > acpica 3218 166K 166K 29902 16,32,64,128,256,512,1024,2048 > acpibatt 1 1K 1K 1 16 > debug.acpi.acpi_ca_version: 0x20040527 > debug.acpi.semaphore_debug: 0 > hw.acpi.supported_sleep_state: S3 S4 S5 > hw.acpi.power_button_state: S5 > hw.acpi.sleep_button_state: S3 > hw.acpi.lid_switch_state: NONE > hw.acpi.standby_state: S1 > hw.acpi.suspend_state: S3 > hw.acpi.sleep_delay: 1 > hw.acpi.s4bios: 0 > hw.acpi.verbose: 0 > hw.acpi.reset_video: 1 > hw.acpi.cpu.cx_supported: C1/0 C2/84 C3/120 > hw.acpi.cpu.cx_lowest: C3 > hw.acpi.cpu.cx_usage: 0.00% 100.00% 0.00% > hw.acpi.thermal.min_runtime: 0 > hw.acpi.thermal.polling_rate: 10 > hw.acpi.thermal.tz0.temperature: 3272 > hw.acpi.thermal.tz0.active: -1 > hw.acpi.thermal.tz0.thermal_flags: 0 > hw.acpi.thermal.tz0._PSV: 3647 > hw.acpi.thermal.tz0._HOT: -1 > hw.acpi.thermal.tz0._CRT: 3702 > hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 > hw.acpi.battery.life: 100 > hw.acpi.battery.time: -1 > hw.acpi.battery.state: 0 > hw.acpi.battery.units: 1 > hw.acpi.battery.info_expire: 5 > hw.acpi.acline: 1 > machdep.acpi_timer_freq: 3579545 > machdep.acpi_root: 1012816 > dev.acpi.0.%desc: IBM TP-1E > dev.acpi.0.%driver: acpi > dev.acpi.0.%parent: nexus0 > dev.acpi_ec.0.%desc: Embedded Controller: GPE 0x1c, ECDT > dev.acpi_ec.0.%driver: acpi_ec > dev.acpi_ec.0.%location: handle=\_SB_.PCI0.LPC_.EC__ > dev.acpi_ec.0.%pnpinfo: _HID=PNP0C09 _UID=0 > dev.acpi_ec.0.%parent: acpi0 > dev.acpi_sysresource.0.%desc: System Resource > dev.acpi_sysresource.0.%driver: acpi_sysresource > dev.acpi_sysresource.0.%location: handle=\_SB_.MEM_ > dev.acpi_sysresource.0.%pnpinfo: _HID=PNP0C01 _UID=0 > dev.acpi_sysresource.0.%parent: acpi0 > dev.acpi_sysresource.1.%desc: System Resource > dev.acpi_sysresource.1.%driver: acpi_sysresource > dev.acpi_sysresource.1.%location: handle=\_SB_.PCI0.LPC_.SIO_ > dev.acpi_sysresource.1.%pnpinfo: _HID=PNP0C02 _UID=0 > dev.acpi_sysresource.1.%parent: acpi0 > dev.acpi_timer.0.%desc: 24-bit timer at 3.579545MHz > dev.acpi_timer.0.%driver: acpi_timer > dev.acpi_timer.0.%location: unknown > dev.acpi_timer.0.%pnpinfo: unknown > dev.acpi_timer.0.%parent: acpi0 > dev.cpu.0.%parent: acpi0 > dev.acpi_tz.0.%desc: Thermal Zone > dev.acpi_tz.0.%driver: acpi_tz > dev.acpi_tz.0.%location: handle=\_TZ_.THM0 > dev.acpi_tz.0.%pnpinfo: _HID=none _UID=0 > dev.acpi_tz.0.%parent: acpi0 > dev.acpi_lid.0.%desc: Control Method Lid Switch > dev.acpi_lid.0.%driver: acpi_lid > dev.acpi_lid.0.%location: handle=\_SB_.LID_ > dev.acpi_lid.0.%pnpinfo: _HID=PNP0C0D _UID=0 > dev.acpi_lid.0.%parent: acpi0 > dev.acpi_lid.0.wake: 1 > dev.acpi_button.0.%desc: Sleep Button > dev.acpi_button.0.%driver: acpi_button > dev.acpi_button.0.%location: handle=\_SB_.SLPB > dev.acpi_button.0.%pnpinfo: _HID=PNP0C0E _UID=0 > dev.acpi_button.0.%parent: acpi0 > dev.acpi_button.0.wake: 1 > dev.pcib.0.%parent: acpi0 > dev.atpic.0.%parent: acpi0 > dev.attimer.0.%parent: acpi0 > dev.attimer.1.%parent: acpi0 > dev.atdma.0.%parent: acpi0 > dev.npxisa.0.%parent: acpi0 > dev.atkbdc.0.%parent: acpi0 > dev.psmcpnp.0.%parent: acpi0 > dev.fdc.0.%parent: acpi0 > dev.sio.0.%parent: acpi0 > dev.sio.1.%parent: acpi0 > dev.ppc.0.%parent: acpi0 > dev.acpi_cmbat.0.%desc: Control Method Battery > dev.acpi_cmbat.0.%driver: acpi_cmbat > dev.acpi_cmbat.0.%location: handle=\_SB_.PCI0.LPC_.EC__.BAT0 > dev.acpi_cmbat.0.%pnpinfo: _HID=PNP0C0A _UID=0 > dev.acpi_cmbat.0.%parent: acpi0 > dev.acpi_acad.0.%desc: AC Adapter > dev.acpi_acad.0.%driver: acpi_acad > dev.acpi_acad.0.%location: handle=\_SB_.PCI0.LPC_.EC__.AC__ > dev.acpi_acad.0.%pnpinfo: _HID=ACPI0003 _UID=0 > dev.acpi_acad.0.%parent: acpi0 > > Cheers, Jochen I'd also be happy to test if you send exactly what you want tested. Thinkpad R40 with p4m here.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200409161039.02581.kjelderg>