Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 16 Sep 2004 10:39:02 -0500
From:      kjelderg@sponge.dyndns.org
To:        freebsd-mobile@freebsd.org
Subject:   Re:[speedstep] testers wanted (Jochen Gensch)
Message-ID:  <200409161039.02581.kjelderg@sponge.dyndns.org>
In-Reply-To: <20040916120103.3554416A4D1@hub.freebsd.org>
References:  <20040916120103.3554416A4D1@hub.freebsd.org>

next in thread | previous in thread | raw e-mail | index | archive | help
>  > I just finished a speedstep driver for p3m and p4m but it's a little bit
>  > ugly, and worst it would work only with ich chipsets.  Even worst, I
>  > don't have the hardware so I can't test it.
>
> I don't if I have the correct hardware, but I gave it a try since I have
> IBM Thinkpad A30p here with a lot of ICH things inside. But I need some
> more input on what data you need...
>
> Some things...
>
> System 5.3-BETA4
>
> SU NB /:dmesg | grep ICH
> uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port
> 0x1800-0x181f irq 9 at device 29.0 on pci0
> usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
> uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port
> 0x1820-0x183f irq 11 at device 29.1 on pci0
> usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
> uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port
> 0x1840-0x185f irq 9 at device 29.2 on pci0
> usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
> fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x8000-0x803f mem
> 0xc0200000-0xc0200fff irq 10 at device 8.0 on pci2
> atapci0: <Intel ICH3 UDMA100 controller> port
> 0x1860-0x186f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
> pcm0: <Intel ICH3 (82801CA)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 5 at
> device 31.5 on pci0
> ichist0: <Intel ICH3m LPC bridge> on motherboard
>
>
> SU NB /:sysctl -a | grep ich
> dev.ichist.0.%desc: Intel ICH3m LPC bridge
> dev.ichist.0.%driver: ichist
> dev.ichist.0.%parent: nexus0
> dev.ichist.0.speedstep: 0
>
>
> SU NB /:sysctl -a | grep acpi
> acpidev    73     3K      3K       73  32
> acpisem    21     2K      2K       21  64
> acpitask     0     0K      1K      290  16,32
> acpica  3218   166K    166K    29902  16,32,64,128,256,512,1024,2048
> acpibatt     1     1K      1K        1  16
> debug.acpi.acpi_ca_version: 0x20040527
> debug.acpi.semaphore_debug: 0
> hw.acpi.supported_sleep_state: S3 S4 S5
> hw.acpi.power_button_state: S5
> hw.acpi.sleep_button_state: S3
> hw.acpi.lid_switch_state: NONE
> hw.acpi.standby_state: S1
> hw.acpi.suspend_state: S3
> hw.acpi.sleep_delay: 1
> hw.acpi.s4bios: 0
> hw.acpi.verbose: 0
> hw.acpi.reset_video: 1
> hw.acpi.cpu.cx_supported: C1/0 C2/84 C3/120
> hw.acpi.cpu.cx_lowest: C3
> hw.acpi.cpu.cx_usage: 0.00% 100.00% 0.00%
> hw.acpi.thermal.min_runtime: 0
> hw.acpi.thermal.polling_rate: 10
> hw.acpi.thermal.tz0.temperature: 3272
> hw.acpi.thermal.tz0.active: -1
> hw.acpi.thermal.tz0.thermal_flags: 0
> hw.acpi.thermal.tz0._PSV: 3647
> hw.acpi.thermal.tz0._HOT: -1
> hw.acpi.thermal.tz0._CRT: 3702
> hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
> hw.acpi.battery.life: 100
> hw.acpi.battery.time: -1
> hw.acpi.battery.state: 0
> hw.acpi.battery.units: 1
> hw.acpi.battery.info_expire: 5
> hw.acpi.acline: 1
> machdep.acpi_timer_freq: 3579545
> machdep.acpi_root: 1012816
> dev.acpi.0.%desc: IBM TP-1E
> dev.acpi.0.%driver: acpi
> dev.acpi.0.%parent: nexus0
> dev.acpi_ec.0.%desc: Embedded Controller: GPE 0x1c, ECDT
> dev.acpi_ec.0.%driver: acpi_ec
> dev.acpi_ec.0.%location: handle=\_SB_.PCI0.LPC_.EC__
> dev.acpi_ec.0.%pnpinfo: _HID=PNP0C09 _UID=0
> dev.acpi_ec.0.%parent: acpi0
> dev.acpi_sysresource.0.%desc: System Resource
> dev.acpi_sysresource.0.%driver: acpi_sysresource
> dev.acpi_sysresource.0.%location: handle=\_SB_.MEM_
> dev.acpi_sysresource.0.%pnpinfo: _HID=PNP0C01 _UID=0
> dev.acpi_sysresource.0.%parent: acpi0
> dev.acpi_sysresource.1.%desc: System Resource
> dev.acpi_sysresource.1.%driver: acpi_sysresource
> dev.acpi_sysresource.1.%location: handle=\_SB_.PCI0.LPC_.SIO_
> dev.acpi_sysresource.1.%pnpinfo: _HID=PNP0C02 _UID=0
> dev.acpi_sysresource.1.%parent: acpi0
> dev.acpi_timer.0.%desc: 24-bit timer at 3.579545MHz
> dev.acpi_timer.0.%driver: acpi_timer
> dev.acpi_timer.0.%location: unknown
> dev.acpi_timer.0.%pnpinfo: unknown
> dev.acpi_timer.0.%parent: acpi0
> dev.cpu.0.%parent: acpi0
> dev.acpi_tz.0.%desc: Thermal Zone
> dev.acpi_tz.0.%driver: acpi_tz
> dev.acpi_tz.0.%location: handle=\_TZ_.THM0
> dev.acpi_tz.0.%pnpinfo: _HID=none _UID=0
> dev.acpi_tz.0.%parent: acpi0
> dev.acpi_lid.0.%desc: Control Method Lid Switch
> dev.acpi_lid.0.%driver: acpi_lid
> dev.acpi_lid.0.%location: handle=\_SB_.LID_
> dev.acpi_lid.0.%pnpinfo: _HID=PNP0C0D _UID=0
> dev.acpi_lid.0.%parent: acpi0
> dev.acpi_lid.0.wake: 1
> dev.acpi_button.0.%desc: Sleep Button
> dev.acpi_button.0.%driver: acpi_button
> dev.acpi_button.0.%location: handle=\_SB_.SLPB
> dev.acpi_button.0.%pnpinfo: _HID=PNP0C0E _UID=0
> dev.acpi_button.0.%parent: acpi0
> dev.acpi_button.0.wake: 1
> dev.pcib.0.%parent: acpi0
> dev.atpic.0.%parent: acpi0
> dev.attimer.0.%parent: acpi0
> dev.attimer.1.%parent: acpi0
> dev.atdma.0.%parent: acpi0
> dev.npxisa.0.%parent: acpi0
> dev.atkbdc.0.%parent: acpi0
> dev.psmcpnp.0.%parent: acpi0
> dev.fdc.0.%parent: acpi0
> dev.sio.0.%parent: acpi0
> dev.sio.1.%parent: acpi0
> dev.ppc.0.%parent: acpi0
> dev.acpi_cmbat.0.%desc: Control Method Battery
> dev.acpi_cmbat.0.%driver: acpi_cmbat
> dev.acpi_cmbat.0.%location: handle=\_SB_.PCI0.LPC_.EC__.BAT0
> dev.acpi_cmbat.0.%pnpinfo: _HID=PNP0C0A _UID=0
> dev.acpi_cmbat.0.%parent: acpi0
> dev.acpi_acad.0.%desc: AC Adapter
> dev.acpi_acad.0.%driver: acpi_acad
> dev.acpi_acad.0.%location: handle=\_SB_.PCI0.LPC_.EC__.AC__
> dev.acpi_acad.0.%pnpinfo: _HID=ACPI0003 _UID=0
> dev.acpi_acad.0.%parent: acpi0
>
> Cheers, Jochen
I'd also be happy to test if you send exactly what you want tested.  Thinkpad 
R40 with p4m here.  



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200409161039.02581.kjelderg>