Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 9 Feb 2005 14:53:36 -0800
From:      Marcel Moolenaar <marcel@xcllnt.net>
To:        m <m@telerama.com>
Cc:        "freebsd-ia64@freebsd.org" <freebsd-ia64@freebsd.org>
Subject:   Re: FreeBSD IA64 5.3/RELEASE on Compaq DL590.
Message-ID:  <20050209225336.GB68948@ns1.xcllnt.net>
In-Reply-To: <BE2FFC52.CC2B%m@telerama.com>
References:  <20050209223656.GA68948@ns1.xcllnt.net> <BE2FFC52.CC2B%m@telerama.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Feb 09, 2005 at 05:43:46PM -0500, m wrote:
> > From: Marcel Moolenaar <marcel@xcllnt.net>
> > Date: Wed, 9 Feb 2005 14:36:56 -0800
> > To: m <m@telerama.com>
> > Cc: Rick Jones <rick.jones2@hp.com>, <freebsd-ia64@freebsd.org>, "Mark J.
> > Nernberg" <mark@compitsolutions.com>
> > Subject: Re: FreeBSD IA64 5.3/RELEASE on Compaq DL590.
> > 
> > On Wed, Feb 09, 2005 at 04:30:14PM -0500, m wrote:
> >>> 
> >>> As for the original issue: Are you using a serial console?
> >> 
> >> No.  Attached keyboard/mouse/monitor.
> >> 
> >> Should I be using a serial console?
> > 
> > Yes. Our console code is still sufficiently legacy-rich that it
> > cannot be enabled by default on ia64.
> > 
> >> If so, is there a link to some quick
> >> setup instructions?
> > 
> > Just enable the EFI console on one of the serial ports and if
> > it's not the default serial port known under DOS as com1, you
> > need to interrupt the FreeBSD auto boot and at the OK prompt
> > enter something like:
> > set hw.uart.console="io:0x2f8"
> > 
> > Followed by:
> > boot
> > 
> > Try the 5-STABLE snapshot. It'll automaticly use whatever the
> > baudrate of the EFI console is...
> > 
> 
> Can I do this by connecting to a (ugh!) Windows box using a terminal
> program?

Yes. Any reasonable ANSI or VT100 compatible terminal emulator
should get you going. The installer itself may be a bit more
demanding, but the boot process should not need more than the
most elementary of features (mostly the EFI boot menu anyway).

FYI,

-- 
 Marcel Moolenaar	  USPA: A-39004		 marcel@xcllnt.net



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050209225336.GB68948>