Date: Wed, 23 Feb 2005 23:06:40 -0300 From: Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org> To: freebsd-stable@FreeBSD.org Subject: FreeBSD 5-STABLE, MSI KT880 , fxp and SCB timeouts Message-ID: <20050224020702.51073.qmail@exxodus.fedaykin.here>
next in thread | raw e-mail | index | archive | help
Hi,
My last motherboard burned down to ashes so I got myself a brand
(after 2 weeks) new MSI KT880. I am getting some weird results.
1) fxp intel etherxpress 10/100 network cards report SCB timeout
as well as achieving ridiculously low transfer rates of 600
Bytes/second. Well, I got 10 KBytes/sec once but that does not count
since a side box gets more than 50KB/s ;-) on the same hub. Oh,
I've already switched hub ports, rj45 cables and fxp cards.
I have the following PCI devices:
- Matrox G450 Dual Head video card
- Intel etherxpress 10/100 network card
- Soundblaster audigy 2 soundboard
- Highpoint ATA 100 raid controller
- Brooktree 878 video capture
Any ideas on how to fix this? Here is my system information
ps: Please include me on CC: when replying because I am not subscribed
to this list mailing list
$ uname -a
FreeBSD exxodus.here.here 5.3-STABLE FreeBSD 5.3-STABLE #0: Wed Feb 23 01:47:05 BRT 2005 lioux@exxodus:/usr/obj/usr/src/sys/LIOUX i386
$ cat /var/run/dmesg.boot
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #0: Wed Feb 23 01:47:05 BRT 2005
lioux@exxodus:/usr/obj/usr/src/sys/LIOUX
ACPI APIC Table: <A M I OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 2600+ (1917.81-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 1072955392 (1023 MB)
avail memory = 1040420864 (992 MB)
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 0.3> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA KT880 host to PCI bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
drm0: <Matrox G400/G450 (AGP)> mem 0xfe000000-0xfe7fffff,0xfeafc000-0xfeafffff,0xfa000000-0xfbffffff irq 16 at device 0.0 on pci1
info: [drm] AGP at 0xe0000000 256MB
info: [drm] Initialized mga 3.1.0 20021029 on minor 0
pci0: <multimedia, video> at device 7.0 (no driver attached)
pci0: <multimedia> at device 7.1 (no driver attached)
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xb800-0xb83f mem 0xfebc0000-0xfebdffff,0xfebfe000-0xfebfefff irq 18 at device 8.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:02:b3:2d:b2:de
pci0: <multimedia, audio> at device 10.0 (no driver attached)
pci0: <input device> at device 10.1 (no driver attached)
pci0: <serial bus, FireWire> at device 10.2 (no driver attached)
atapci0: <VIA 6420 SATA150 controller> port 0xc800-0xc80f,0xcc00-0xcc03,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 irq 20 at device 15.0 on pci0
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
atapci1: <VIA 8237 UDMA133 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
uhci0: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 21 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 21 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 21 at device 16.2 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xe800-0xe81f irq 21 at device 16.3 on pci0
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <ISA Option ROMs> at iomem 0xc8800-0xc9fff,0xc0000-0xc87ff on isa0
pmtimer0 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0 at vga0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounter "TSC" frequency 1917807181 Hz quality 800
Timecounters tick every 0.868 msec
IP Filter: v3.4.35 initialized. Default = pass all, Logging = disabled
ipfw2 initialized, divert disabled, rule-based forwarding disabled, default to accept, logging disabled
acd0: CDRW <HL-DT-ST GCE-8525B/1.02> at ata0-master UDMA33
acd1: DVDR <HL-DT-ST DVDRAM GSA-4120B/A102> at ata0-slave UDMA33
ad2: 152627MB <ST3160021A/3.06> [310101/16/63] at ata1-master UDMA100
cd0 at ata0 bus 0 target 0 lun 0
cd0: <HL-DT-ST CD-RW GCE-8525B 1.02> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
cd1 at ata0 bus 0 target 1 lun 0
cd1: <HL-DT-ST DVDRAM GSA-4120B A102> Removable CD-ROM SCSI-0 device
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad2s4a
acd1: FAILURE - unknown CMD (0xe3) status=51<READY,DSC,ERROR> error=4<ABORTED>
acd1: FAILURE - unknown CMD (0xe2) status=51<READY,DSC,ERROR> error=4<ABORTED>
fxp0: Microcode loaded, int_delay: 1000 usec bundle_max: 6
emu10kx0: <Creative Audigy (Unknow model) [SB????]> port 0xbc00-0xbc3f irq 17 at device 10.0 on pci0
pcm0: <EMU10Kx PCM Interface> on emu10kx0
pcm0: <SigmaTel STAC9721/23 AC97 Codec>
emu10kx0: Audigy AC3 passthrough disabled
pid 1048 (ripmime), uid 82: exited on signal 11
pid 12974 (ripmime), uid 82: exited on signal 11
pid 26692 (ripmime), uid 82: exited on signal 11
pid 49171 (as), uid 0: exited on signal 11 (core dumped)
pid 49449 (as), uid 0: exited on signal 11 (core dumped)
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...16 9 9 3 3 3 1 1 1 0 0 0 0 done
No buffers busy after final sync
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #0: Wed Feb 23 22:26:32 BRT 2005
lioux@exxodus:/usr/src/sys/i386/compile/LIOUX
ACPI APIC Table: <A M I OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 2600+ (1917.81-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 1072955392 (1023 MB)
avail memory = 1040412672 (992 MB)
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 0.3> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA KT880 host to PCI bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
drm0: <Matrox G400/G450 (AGP)> mem 0xfe000000-0xfe7fffff,0xfeafc000-0xfeafffff,0xfa000000-0xfbffffff irq 16 at device 0.0 on pci1
info: [drm] AGP at 0xe0000000 256MB
info: [drm] Initialized mga 3.1.0 20021029 on minor 0
bktr0: <BrookTree 878> mem 0xfd9fe000-0xfd9fefff irq 19 at device 7.0 on pci0
smbus0: <System Management Bus> on bktr0
iicbb0: <I2C bit-banging driver> on bktr0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicsmb0: <SMBus over I2C bridge> on iicbus0
smbus1: <System Management Bus> on iicsmb0
bktr0: Hauppauge Model 44001 C110
bktr0: Hauppauge WinCast/TV.
pci0: <multimedia> at device 7.1 (no driver attached)
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xb800-0xb83f mem 0xfebc0000-0xfebdffff,0xfebfe000-0xfebfefff irq 18 at device 8.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:02:b3:2d:b2:de
emu10kx0: <Creative Audigy (Unknow model) [SB????]> port 0xbc00-0xbc3f irq 17 at device 10.0 on pci0
pcm0: <EMU10Kx PCM Interface> on emu10kx0
pcm0: <SigmaTel STAC9721/23 AC97 Codec>
pci0: <input device> at device 10.1 (no driver attached)
pci0: <serial bus, FireWire> at device 10.2 (no driver attached)
atapci0: <VIA 6420 SATA150 controller> port 0xc800-0xc80f,0xcc00-0xcc03,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 irq 20 at device 15.0 on pci0
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
atapci1: <VIA 8237 UDMA133 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
uhci0: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 21 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 21 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 21 at device 16.2 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xe800-0xe81f irq 21 at device 16.3 on pci0
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc8800-0xc9fff,0xc0000-0xc87ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0 at vga0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounter "TSC" frequency 1917805899 Hz quality 800
Timecounters tick every 0.868 msec
IP Filter: v3.4.35 initialized. Default = pass all, Logging = disabled
ipfw2 initialized, divert disabled, rule-based forwarding disabled, default to accept, logging disabled
acd0: CDRW <HL-DT-ST GCE-8525B/1.02> at ata0-master UDMA33
acd1: DVDR <HL-DT-ST DVDRAM GSA-4120B/A102> at ata0-slave UDMA33
ad2: 152627MB <ST3160021A/3.06> [310101/16/63] at ata1-master UDMA100
cd0 at ata0 bus 0 target 0 lun 0
cd0: <HL-DT-ST CD-RW GCE-8525B 1.02> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
cd1 at ata0 bus 0 target 1 lun 0
cd1: <HL-DT-ST DVDRAM GSA-4120B A102> Removable CD-ROM SCSI-0 device
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
--
Mario S F Ferreira - DF - Brazil - "I guess this is a signature."
feature, n: a documented bug | bug, n: an undocumented feature
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050224020702.51073.qmail>