Date: Sun, 27 Mar 2005 13:06:40 -0800 (PST) From: Doug White <dwhite@gumbysoft.com> To: Graham Menhennitt <gmenhennitt@optusnet.com.au> Cc: freebsd-stable@freebsd.org Subject: Re: "ffs_mountroot: can't find rootvp" after cvsup and making worldfmen Message-ID: <20050327130409.F35584@carver.gumbysoft.com> In-Reply-To: <42449BCE.7010600@optusnet.com.au> References: <42436771.3060006@optusnet.com.au> <20050325133558.U16071@carver.gumbysoft.com> <42449BCE.7010600@optusnet.com.au>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 26 Mar 2005, Graham Menhennitt wrote:
> >>I just cvsupped to the latest RELENG_5 (as of yesterday) and built and
> >>installed the world and a new kernel. When I boot the new kernel, I get
> >>an error "ffs_mountroot: can't find rootvp". At the "mountroot>" prompt=
,
> >>whatever I type (even '?') causes a crash and reboot. I can still boot
> >>my old kernel without a problem. The dmesg from the old kernel and a
> >>capture of the boot of the new kernel are below. Noticably absent from
> >>the new one is the line "ad0: 76319MB <ST380011A/3.06> [155061/16/63] a=
t
> >>ata0-master UDMA100" which is my only disk drive.
Hm .. from the -v output it looks like the first ATA channel is not
resetting properly for the probe. We'll need to get a better idea of when
the problem appears since a lot has changed between January and now.
Some more stuff to try:
1. Boot up the new kernel off a cold power cycle, in case freebsd is
leaving the controller is some inconsistent state.
2. Download the February 2005 -STABLE snapshot and try booting that.
That can be the first step in a binary search for the offending commit.
> >>
> >>Can somebody please help?
> >>
> >>
> >
> >
> >
> Hi Doug. Thanks for responding.
>
> >If you break out of the beastie menu with '6' then enter:
> >
> >unload
> >boot kernel.old
> >
> >that will get you your old, working kernel. Make a backup of this kernel
> >before doing anything else by 'cd /boot; cp -Rp kernel.old kernel.WORKS'=
=2E
> >You can then reference this in loader by doing 'boot kernel.WORKS'.
> >
> >
> Already done that.
>
> >Next we need to determine why the disk did not probe. I'd suggest bootin=
g
> >with -v and looking for messages from ata about disk discovery.
> >
> >
> >
> A capture of the "boot -v" is below. It doesn't mean anything to me.
>
> >Did you change anything in your kernel config between these kernels?
> >
> >
> >
> No. My kernel config is below too.
>
> Thanks again for helping,
> Graham
>
> >>Thanks,
> >> Graham
> >>
> >> >>>>>>>>>>>>>>>>> old kernel <<<<<<<<<<<<<<<<<<<<<<
> >>
> >>Copyright (c) 1992-2005 The FreeBSD Project.
> >>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 199=
4
> >> The Regents of the University of California. All rights reserve=
d.
> >>FreeBSD 5.3-STABLE #18: Fri Jan 21 06:23:06 EST 2005
> >> gfm@xxxx.xxx.xxx:/usr/obj/usr/src/sys/fang
> >>Timecounter "i8254" frequency 1193182 Hz quality 0
> >>CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz (1700.03-MHz 686-class CPU)
> >> Origin =3D "GenuineIntel" Id =3D 0xf12 Stepping =3D 2
> >>
> >>Features=3D0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,=
PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
> >>real memory =3D 335478784 (319 MB)
> >>avail memory =3D 322949120 (307 MB)
> >>npx0: [FAST]
> >>npx0: <math processor> on motherboard
> >>npx0: INT 16 interface
> >>acpi0: <GBT AWRDACPI> on motherboard
> >>acpi0: Power Button (fixed)
> >>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> >>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
> >>cpu0: <ACPI CPU> on acpi0
> >>acpi_button0: <Power Button> on acpi0
> >>acpi_button1: <Sleep Button> on acpi0
> >>pcib0: <ACPI Host-PCI bridge> port 0x4000-0x40f7,0xcf8-0xcff on acpi0
> >>pci0: <ACPI PCI bus> on pcib0
> >>pcib1: <PCI-PCI bridge> at device 1.0 on pci0
> >>pci1: <PCI bus> on pcib1
> >>pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> >>pci2: <ACPI PCI bus> on pcib2
> >>rl0: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem
> >>0xe4000000-0xe40000ff irq 11 at device 9.0 on pci2
> >>miibus0: <MII bus> on rl0
> >>rlphy0: <RealTek internal media interface> on miibus0
> >>rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> >>rl0: Ethernet address: 00:20:ed:1c:da:f9
> >>pci2: <multimedia, audio> at device 10.0 (no driver attached)
> >>isab0: <PCI-ISA bridge> at device 31.0 on pci0
> >>isa0: <ISA bus> on isab0
> >>atapci0: <Intel ICH2 UDMA100 controller> port
> >>0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci=
0
> >>ata0: channel #0 on atapci0
> >>ata1: channel #1 on atapci0
> >>uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port
> >>0xd000-0xd01f irq 5 at device 31.2 on pci0
> >>uhci0: [GIANT-LOCKED]
> >>usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
> >>usb0: USB revision 1.0
> >>uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> >>uhub0: 2 ports with 2 removable, self powered
> >>pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> >>uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port
> >>0xd800-0xd81f irq 12 at device 31.4 on pci0
> >>uhci1: [GIANT-LOCKED]
> >>usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
> >>usb1: USB revision 1.0
> >>uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> >>uhub1: 2 ports with 2 removable, self powered
> >>fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on a=
cpi0
> >>fdc0: [FAST]
> >>sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
> >>acpi0
> >>sio0: type 16550A, console
> >>sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
> >>sio1: type 16550A
> >>ppc0: <Standard parallel printer port> port 0x778-0x77b,0x378-0x37f irq
> >>7 on acpi0
> >>ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> >>ppbus0: <Parallel port bus> on ppc0
> >>ppbus0: IEEE1284 device found
> >>Probing for PnP devices on ppbus0:
> >>lpt0: <Printer> on ppbus0
> >>lpt0: Interrupt-driven port
> >>atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
> >>atkbd0: <AT Keyboard> irq 1 on atkbdc0
> >>kbd0 at atkbd0
> >>atkbd0: [GIANT-LOCKED]
> >>Timecounter "TSC" frequency 1700030560 Hz quality 800
> >>Timecounters tick every 10.000 msec
> >>acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
> >>ad0: 76319MB <ST380011A/3.06> [155061/16/63] at ata0-master UDMA100
> >>Mounting root from ufs:/dev/ad0s1a
> >>
> >>
> >> >>>>>>>>>>>>>>>>>>>>> new kernel <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
> >>/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=
=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08=
/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=
=08|=08/=08-=08Console:
> >>serial port
> >>BIOS drive A: is disk0
> >>BIOS drive C: is disk1
> >>BIOS 639kB/326592kB available memory
> >>
> >>FreeBSD/i386 bootstrap loader, Revision 1.1
> >>(xxx@xxxx.xxx, Wed Mar 23 20:16:31 EST 2005)
> >>|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=
=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08=
|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=
=08\=08|=08/=08-=08\=08Loading
> >>/boot/defaults/loader.conf
> >>|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=
=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08=
|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=
=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08=
/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=
=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08=
-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=
=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08=
\=08/boot/kernel/kernel
> >>text=3D0x252bec |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=
=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08=
|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=
=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08=
/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=
=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08=
-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=
=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08=
\=08|=08/=08-=08\=08|=08data=3D0x2bbe8+0x30518
> >>/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08syms=3D[0x4+0x36040/=08=
-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08+0x4+0x44316\=08|=08/=
=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08]
> >>|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=
=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08Loading
> >>/boot/defaults/loader.conf
> >>-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=
=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08=
-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=
=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08=1B[H=1B[J=1B[4;=
46H
> >>, ,=1B[5;46H /( )`=1B[6;46H \ \___ =
/
> >>|=1B[7;46H /- _ `-/ '=1B[8;46H (/\/ \ \
> >>/\=1B[9;46H / / | ` \=1B[10;46H O O ) /
> >>|=1B[11;46H `-^--'`< '=1B[12;46H (_.) _ )
> >>/=1B[13;46H `.___/` /=1B[14;46H `-----'
> >>/=1B[15;46H<----. __ / __ \=1B[16;46H<----|=3D=3D=3D=3DO)))=3D=3D=
) \)
> >>/=3D=3D=3D=3D=1B[17;46H<----' `--' `.__,' \=1B[18;46H |
> >>|=1B[19;46H \ / /\=1B[20;46H ______( (=
_
> >>/ \______/=1B[21;46H ,' ,-----' |=1B[22;46H `--{________=
__)=1B[3;2H=B3=1B[4;2H=B3=1B[5;2H=B3=1B[6;2H=B3=1B[7;2H=B3=1B[8;2H=B3=1B[9;=
2H=B3=1B[10;2H=B3=1B[11;2H=B3=1B[12;2H=B3=1B[13;2H=B3=1B[14;2H=B3=1B[15;2H=
=B3=1B[16;2H=B3=1B[17;2H=B3=1B[18;2H=B3=1B[19;2H=B3=1B[20;2H=B3=1B[21;2H=B3=
=1B[3;44H=B3=1B[4;44H=B3=1B[5;44H=B3=1B[6;44H=B3=1B[7;44H=B3=1B[8;44H=B3=1B=
[9;44H=B3=1B[10;44H=B3=1B[11;44H=B3=1B[12;44H=B3=1B[13;44H=B3=1B[14;44H=B3=
=1B[15;44H=B3=1B[16;44H=B3=1B[17;44H=B3=1B[18;44H=B3=1B[19;44H=B3=1B[20;44H=
=B3=1B[21;44H=B3=1B[2;3H=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=
=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=1B=
[22;3H=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=
=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=1B[2;2H=DA=1B[22;2H=
=C0=1B[2;44H=BF=1B[22;44H=D9=1B[6;13HWelcome
> >>to FreeBSD!=1B[9;5H1 =1B[9;6H. Boot FreeBSD [default]=1B[10;5H2 =1B[10;=
6H. Boot
> >>FreeBSD with ACPI disabled=1B[11;5H3 =1B[11;6H. Boot FreeBSD in Safe
> >>Mode=1B[12;5H4 =1B[12;6H. Boot FreeBSD in single user mode=1B[13;5H5 =
=1B[13;6H.
> >>Boot FreeBSD with verbose logging=1B[14;5H6 =1B[14;6H. Escape to loader
> >>prompt=1B[15;5H7 =1B[15;6H. Reboot=1B[20;5HSelect option, [Enter] for
> >>default=1B[21;5Hor [Space] to pause timer =1B[21;32H10 =1B[21;32H10
> >>=1B[21;32H10 =1B[21;32H10 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32=
H9
> >>=1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9=
=1B[21;32H9
> >>=1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9=
=1B[21;32H8
> >>=1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32H8=
=1B[21;32H8
> >>=1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B[25;0H\=
=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08=
-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=
=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08=
\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=
=08-=08\=08|=08/=08-=08\=08|=08/=08-=08ACPI
> >>autoload failed - no such file or directory
> >>\=08|=08/=08-=08\=08|=08/=08Copyright (c) 1992-2005 The FreeBSD Project=
=2E
> >>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 199=
4
> >> The Regents of the University of California. All rights reserved.
> >>FreeBSD 5.4-PRERELEASE #19: Fri Mar 25 07:31:35 EST 2005
> >> xxx@xxxx.xxx:/usr/obj/usr/src/sys/fang
> >>Timecounter "i8254" frequency 1193182 Hz quality 0
> >>CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz (1700.03-MHz 686-class CPU)
> >> Origin =3D "GenuineIntel" Id =3D 0xf12 Stepping =3D 2
> >>
> >>Features=3D0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,=
PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
> >>real memory =3D 335478784 (319 MB)
> >>avail memory =3D 322957312 (307 MB)
> >>npx0: <math processor> on motherboard
> >>npx0: INT 16 interface
> >>cpu0 on motherboard
> >>pcib0: <Host to PCI bridge> pcibus 0 on motherboard
> >>pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard
> >>pci0: <PCI bus> on pcib0
> >>pcib1: <PCI-PCI bridge> at device 1.0 on pci0
> >>pci1: <PCI bus> on pcib1
> >>pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
> >>pci2: <PCI bus> on pcib2
> >>rl0: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem
> >>0xe4000000-0xe40000ff irq 11 at device 9.0 on pci2
> >>miibus0: <MII bus> on rl0
> >>rlphy0: <RealTek internal media interface> on miibus0
> >>rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> >>rl0: Ethernet address: 00:20:ed:1c:da:f9
> >>pci2: <multimedia, audio> at device 10.0 (no driver attached)
> >>isab0: <PCI-ISA bridge> at device 31.0 on pci0
> >>isa0: <ISA bus> on isab0
> >>atapci0: <Intel ICH2 UDMA100 controller> port
> >>0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci=
0
> >>ata0: channel #0 on atapci0
> >>ata1: channel #1 on atapci0
> >>uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port
> >>0xd000-0xd01f irq 5 at device 31.2 on pci0
> >>usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
> >>usb0: USB revision 1.0
> >>uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> >>uhub0: 2 ports with 2 removable, self powered
> >>pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> >>uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port
> >>0xd800-0xd81f irq 12 at device 31.4 on pci0
> >>usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
> >>usb1: USB revision 1.0
> >>uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> >>uhub1: 2 ports with 2 removable, self powered
> >>atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
> >>atkbd0: <AT Keyboard> irq 1 on atkbdc0
> >>kbd0 at atkbd0
> >>fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on i=
sa0
> >>ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> >>ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> >>ppbus0: <Parallel port bus> on ppc0
> >>ppbus0: IEEE1284 device found
> >>Probing for PnP devices on ppbus0:
> >>lpt0: <Printer> on ppbus0
> >>lpt0: Interrupt-driven port
> >>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> >>sio0: type 16550A, console
> >>sio1 at port 0x2f8-0x2ff irq 3 on isa0
> >>sio1: type 16550A
> >>unknown: <PNP0303> can't assign resources (port)
> >>unknown: <PNP0501> can't assign resources (port)
> >>unknown: <PNP0700> can't assign resources (port)
> >>unknown: <PNP0400> can't assign resources (port)
> >>unknown: <PNP0501> can't assign resources (port)
> >>Timecounter "TSC" frequency 1700026032 Hz quality 800
> >>Timecounters tick every 10.000 msec
> >>Mounting root from ufs:/dev/ad0s1a
> >>setrootbyname failed
> >>ffs_mountroot: can't find rootvp
> >>Root mount failed: 6
> >>
> >>Manual root filesystem specification:
> >> <fstype>:<device> Mount <device> using filesystem <fstype>
> >> eg. ufs:da0s1a
> >> ? List valid disk boot devices
> >> <empty line> Abort manual input
> >>
> >>mountroot>
> >>_______________________________________________
> >>freebsd-stable@freebsd.org mailing list
> >>http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> >>To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.or=
g"
> >>
> >>
> >>
> >
> >
> >
> >>>>>>>>>>>>>>>>>>>>>>>> new kernel with -v flag
> <<<<<<<<<<<<<<<<<<<<<<<<<<<<<
> /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=
=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08=
-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=
=08/=08-=08Console:
> serial port
> BIOS drive A: is disk0
> BIOS drive C: is disk1
> BIOS 639kB/326592kB available memory
>
> FreeBSD/i386 bootstrap loader, Revision 1.1
> (xxx@xxxx.xxx, Wed Mar 23 20:16:31 EST 2005)
> |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=
=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08=
/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=
=08|=08/=08-=08\=08Loading
> /boot/defaults/loader.conf
> |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=
=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08=
/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=
=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08=
-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=
=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08=
\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=
=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08=
/boot/kernel/kernel
> text=3D0x252bec |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=
=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08=
/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=
=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08=
-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=
=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08=
\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=
=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08=
|=08/=08-=08\=08|=08data=3D0x2bbe8+0x30518
> /=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08syms=3D[0x4+0x36040/=08-=
=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08+0x4+0x44316\=08|=08/=08=
-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08]
> |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=
=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08Loading
> /boot/defaults/loader.conf
> -=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=
=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08=
\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=
=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08=1B[H=1B[J=1B[4;46H
> , ,=1B[5;46H /( )`=1B[6;46H \ \___ =
/
> |=1B[7;46H /- _ `-/ '=1B[8;46H (/\/ \ \
> /\=1B[9;46H / / | ` \=1B[10;46H O O ) /
> |=1B[11;46H `-^--'`< '=1B[12;46H (_.) _ )
> /=1B[13;46H `.___/` /=1B[14;46H `-----'
> /=1B[15;46H<----. __ / __ \=1B[16;46H<----|=3D=3D=3D=3DO)))=3D=3D) =
\)
> /=3D=3D=3D=3D=1B[17;46H<----' `--' `.__,' \=1B[18;46H |
> |=1B[19;46H \ / /\=1B[20;46H ______( (_
> / \______/=1B[21;46H ,' ,-----' |=1B[22;46H `--{__________=
)=1B[3;2H=B3=1B[4;2H=B3=1B[5;2H=B3=1B[6;2H=B3=1B[7;2H=B3=1B[8;2H=B3=1B[9;2H=
=B3=1B[10;2H=B3=1B[11;2H=B3=1B[12;2H=B3=1B[13;2H=B3=1B[14;2H=B3=1B[15;2H=B3=
=1B[16;2H=B3=1B[17;2H=B3=1B[18;2H=B3=1B[19;2H=B3=1B[20;2H=B3=1B[21;2H=B3=1B=
[3;44H=B3=1B[4;44H=B3=1B[5;44H=B3=1B[6;44H=B3=1B[7;44H=B3=1B[8;44H=B3=1B[9;=
44H=B3=1B[10;44H=B3=1B[11;44H=B3=1B[12;44H=B3=1B[13;44H=B3=1B[14;44H=B3=1B[=
15;44H=B3=1B[16;44H=B3=1B[17;44H=B3=1B[18;44H=B3=1B[19;44H=B3=1B[20;44H=B3=
=1B[21;44H=B3=1B[2;3H=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=
=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=1B[22=
;3H=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=
=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=1B[2;2H=DA=1B[22;2H=C0=
=1B[2;44H=BF=1B[22;44H=D9=1B[6;13HWelcome
> to FreeBSD!=1B[9;5H1 =1B[9;6H. Boot FreeBSD [default]=1B[10;5H2 =1B[10;6H=
=2E Boot
> FreeBSD with ACPI disabled=1B[11;5H3 =1B[11;6H. Boot FreeBSD in Safe
> Mode=1B[12;5H4 =1B[12;6H. Boot FreeBSD in single user mode=1B[13;5H5 =1B[=
13;6H.
> Boot FreeBSD with verbose logging=1B[14;5H6 =1B[14;6H. Escape to loader
> prompt=1B[15;5H7 =1B[15;6H. Reboot=1B[20;5HSelect option, [Enter] for
> default=1B[21;5Hor [Space] to pause timer =1B[21;32H10 =1B[21;32H10
> =1B[21;32H10 =1B[21;32H10 =1B[21;32H10 =1B[21;32H10 =1B[21;32H10 =1B[21;3=
2H10
> =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =
=1B[25;0H
>
> Type '?' for a list of commands, 'help' for more detailed help.
> OK boot -v
> \=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=
=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08=
|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=
=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08=
/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08ACPI
> autoload failed - no such file or directory
> \=08|=08/=08-=08\=08|=08/=08SMAP type=3D01 base=3D0000000000000000 len=3D=
000000000009fc00
> SMAP type=3D01 base=3D000000000009fc00 len=3D0000000000000400
> SMAP type=3D02 base=3D00000000000f0000 len=3D0000000000010000
> SMAP type=3D02 base=3D00000000fec00000 len=3D0000000001400000
> SMAP type=3D01 base=3D0000000000100000 len=3D0000000013ef0000
> SMAP type=3D03 base=3D0000000013ff3000 len=3D000000000000d000
> SMAP type=3D04 base=3D0000000013ff0000 len=3D0000000000003000
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 5.4-PRERELEASE #19: Fri Mar 25 07:31:35 EST 2005
> xxx@xxxx.xxx:/usr/obj/usr/src/sys/fang
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc072c000.
> Calibrating clock(s) ... i8254 clock: 1193225 Hz
> CLK_USE_I8254_CALIBRATION not specified - using default frequency
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Calibrating TSC clock ... TSC clock: 1700030456 Hz
> CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz (1700.03-MHz 686-class CPU)
> Origin =3D "GenuineIntel" Id =3D 0xf12 Stepping =3D 2
>
> Features=3D0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
> real memory =3D 335478784 (319 MB)
> Physical memory chunk(s):
> 0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)
> 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
> 0x0000000000825000 - 0x0000000013a1ffff, 320843776 bytes (78331 pages)
> avail memory =3D 322957312 (307 MB)
> bios32: Found BIOS32 Service Directory header at 0xc00faa40
> bios32: Entry =3D 0xfaed0 (c00faed0) Rev =3D 0 Len =3D 1
> pcibios: PCI BIOS entry at 0xf0000+0xaf00
> pnpbios: Found PnP BIOS data at 0xc00fb8f0
> pnpbios: Entry =3D f0000:b920 Rev =3D 1.0
> Other BIOS signatures found:
> null: <null device, zero device>
> random: <entropy source, Software, Yarrow>
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> cpu0 on motherboard
> pci_open(1): mode 1 addr port (0x0cf8) is 0x80000090
> pci_open(1a): mode1res=3D0x80000000 (0x80000000)
> pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D0000=
0010)
> pcibios: BIOS version 2.10
> Found $PIR table, 9 entries at 0xc00fded0
> PCI-Only Interrupts: 5 9 10 11 12
> Location Bus Device Pin Link IRQs
> slot 1 0 2 A 0x60 3 4 5 7 9 10 11 12 14 15
> slot 1 0 2 B 0x61 3 4 5 7 9 10 11 12 14 15
> slot 1 0 2 C 0x62 3 4 5 7 9 10 11 12 14 15
> slot 1 0 2 D 0x63 3 4 5 7 9 10 11 12 14 15
> slot 2 2 8 A 0x68 3 4 5 7 9 10 11 12 14 15
> slot 2 2 8 B 0x69 3 4 5 7 9 10 11 12 14 15
> slot 2 2 8 C 0x6a 3 4 5 7 9 10 11 12 14 15
> slot 2 2 8 D 0x6b 3 4 5 7 9 10 11 12 14 15
> slot 3 2 0 A 0x62 3 4 5 7 9 10 11 12 14 15
> slot 3 2 0 B 0x69 3 4 5 7 9 10 11 12 14 15
> slot 3 2 0 C 0x6a 3 4 5 7 9 10 11 12 14 15
> slot 3 2 0 D 0x60 3 4 5 7 9 10 11 12 14 15
> slot 4 2 1 A 0x69 3 4 5 7 9 10 11 12 14 15
> slot 4 2 1 B 0x6a 3 4 5 7 9 10 11 12 14 15
> slot 4 2 1 C 0x60 3 4 5 7 9 10 11 12 14 15
> slot 4 2 1 D 0x62 3 4 5 7 9 10 11 12 14 15
> slot 5 2 2 A 0x6a 3 4 5 7 9 10 11 12 14 15
> slot 5 2 2 B 0x60 3 4 5 7 9 10 11 12 14 15
> slot 5 2 2 C 0x62 3 4 5 7 9 10 11 12 14 15
> slot 5 2 2 D 0x69 3 4 5 7 9 10 11 12 14 15
> slot 6 2 9 A 0x69 3 4 5 7 9 10 11 12 14 15
> slot 6 2 9 B 0x6a 3 4 5 7 9 10 11 12 14 15
> slot 6 2 9 C 0x60 3 4 5 7 9 10 11 12 14 15
> slot 6 2 9 D 0x62 3 4 5 7 9 10 11 12 14 15
> slot 7 2 10 A 0x6a 3 4 5 7 9 10 11 12 14 15
> slot 7 2 10 B 0x60 3 4 5 7 9 10 11 12 14 15
> slot 7 2 10 C 0x62 3 4 5 7 9 10 11 12 14 15
> slot 7 2 10 D 0x69 3 4 5 7 9 10 11 12 14 15
> embedded 0 31 A 0x60 3 4 5 7 9 10 11 12 14 15
> embedded 0 31 B 0x61 3 4 5 7 9 10 11 12 14 15
> embedded 0 31 C 0x6b 3 4 5 7 9 10 11 12 14 15
> embedded 0 31 D 0x63 3 4 5 7 9 10 11 12 14 15
> embedded 0 1 A 0x60 3 4 5 7 9 10 11 12 14 15
> embedded 0 1 B 0x61 3 4 5 7 9 10 11 12 14 15
> embedded 0 1 C 0x62 3 4 5 7 9 10 11 12 14 15
> embedded 0 1 D 0x63 3 4 5 7 9 10 11 12 14 15
> pcib0: <Host to PCI bridge> pcibus 0 on motherboard
> pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard
> $PIR: Links after initial probe:
> Link IRQ Rtd Ref IRQs
> 0x60 255 N 8 3 4 5 7 9 10 11 12 14 15
> 0x61 255 N 3 3 4 5 7 9 10 11 12 14 15
> 0x62 255 N 7 3 4 5 7 9 10 11 12 14 15
> 0x63 255 N 3 3 4 5 7 9 10 11 12 14 15
> 0x68 255 N 1 3 4 5 7 9 10 11 12 14 15
> 0x69 255 N 6 3 4 5 7 9 10 11 12 14 15
> 0x6a 255 N 6 3 4 5 7 9 10 11 12 14 15
> 0x6b 255 N 2 3 4 5 7 9 10 11 12 14 15
> $PIR: Found matching pin for 2.9.INTA at func 0: 11
> $PIR: Found matching pin for 2.10.INTA at func 0: 10
> $PIR: Found matching pin for 0.31.INTB at func 3: 9
> $PIR: Found matching pin for 0.31.INTC at func 4: 12
> $PIR: Found matching pin for 0.31.INTD at func 2: 5
> $PIR: Links after initial IRQ discovery:
> Link IRQ Rtd Ref IRQs
> 0x60 255 N 8 3 4 5 7 9 10 11 12 14 15
> 0x61 9 Y 3 3 4 5 7 9 10 11 12 14 15
> 0x62 255 N 7 3 4 5 7 9 10 11 12 14 15
> 0x63 5 Y 3 3 4 5 7 9 10 11 12 14 15
> 0x68 255 N 1 3 4 5 7 9 10 11 12 14 15
> 0x69 11 Y 6 3 4 5 7 9 10 11 12 14 15
> 0x6a 10 Y 6 3 4 5 7 9 10 11 12 14 15
> 0x6b 12 Y 2 3 4 5 7 9 10 11 12 14 15
> $PIR: IRQs used by BIOS: 5 9 10 11 12
> $PIR: Interrupt Weights:
> [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
> [ 0 0 0 0 0 3 0 0 0 3 6 6 2 0 0 0 ]
> pci0: <PCI bus> on pcib0
> pci0: physical bus=3D0
> map[10]: type 3, range 32, base e0000000, size 26, enabled
> found-> vendor=3D0x8086, dev=3D0x1a30, revid=3D0x03
> bus=3D0, slot=3D0, func=3D0
> class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
> cmdreg=3D0x0006, statreg=3D0x2090, cachelnsz=3D0 (dwords)
> lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
> found-> vendor=3D0x8086, dev=3D0x1a31, revid=3D0x03
> bus=3D0, slot=3D1, func=3D0
> class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
> cmdreg=3D0x0107, statreg=3D0x00a0, cachelnsz=3D0 (dwords)
> lattimer=3D0x40 (1920 ns), mingnt=3D0x06 (1500 ns), maxlat=3D0x00 (0 =
ns)
> found-> vendor=3D0x8086, dev=3D0x244e, revid=3D0x12
> bus=3D0, slot=3D30, func=3D0
> class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
> cmdreg=3D0x0107, statreg=3D0x0080, cachelnsz=3D0 (dwords)
> lattimer=3D0x00 (0 ns), mingnt=3D0x06 (1500 ns), maxlat=3D0x00 (0 ns)
> found-> vendor=3D0x8086, dev=3D0x2440, revid=3D0x12
> bus=3D0, slot=3D31, func=3D0
> class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
> cmdreg=3D0x000f, statreg=3D0x0280, cachelnsz=3D0 (dwords)
> lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
> map[20]: type 4, range 32, base 0000f000, size 4, enabled
> found-> vendor=3D0x8086, dev=3D0x244b, revid=3D0x12
> bus=3D0, slot=3D31, func=3D1
> class=3D01-01-80, hdrtype=3D0x00, mfdev=3D0
> cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
> lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
> map[20]: type 4, range 32, base 0000d000, size 5, enabled
> $PIR: 0:31 INTD routed to irq 5
> found-> vendor=3D0x8086, dev=3D0x2442, revid=3D0x12
> bus=3D0, slot=3D31, func=3D2
> class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
> cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
> lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
> intpin=3Dd, irq=3D5
> map[20]: type 4, range 32, base 00005000, size 4, enabled
> $PIR: 0:31 INTB routed to irq 9
> found-> vendor=3D0x8086, dev=3D0x2443, revid=3D0x12
> bus=3D0, slot=3D31, func=3D3
> class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D0
> cmdreg=3D0x0001, statreg=3D0x0280, cachelnsz=3D0 (dwords)
> lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
> intpin=3Db, irq=3D9
> map[20]: type 4, range 32, base 0000d800, size 5, enabled
> $PIR: 0:31 INTC routed to irq 12
> found-> vendor=3D0x8086, dev=3D0x2444, revid=3D0x12
> bus=3D0, slot=3D31, func=3D4
> class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
> cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
> lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
> intpin=3Dc, irq=3D12
> pcib1: <PCI-PCI bridge> at device 1.0 on pci0
> pcib1: secondary bus 1
> pcib1: subordinate bus 1
> pcib1: I/O decode 0xf000-0xfff
> pcib1: memory decode 0xfff00000-0xfffff
> pcib1: prefetched decode 0xfff00000-0xfffff
> pci1: <PCI bus> on pcib1
> pci1: physical bus=3D1
> pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
> pcib2: secondary bus 2
> pcib2: subordinate bus 2
> pcib2: I/O decode 0xc000-0xcfff
> pcib2: memory decode 0xe4000000-0xe40fffff
> pcib2: prefetched decode 0xfff00000-0xfffff
> pcib2: Subtractively decoded bridge.
> pci2: <PCI bus> on pcib2
> pci2: physical bus=3D2
> map[10]: type 4, range 32, base 0000c000, size 8, enabled
> pcib2: device (null) requested decoded I/O range 0xc000-0xc0ff
> map[14]: type 1, range 32, base e4000000, size 8, enabled
> pcib2: device (null) requested decoded memory range 0xe4000000-0xe40000ff
> $PIR: 2:9 INTA routed to irq 11
> found-> vendor=3D0x10ec, dev=3D0x8139, revid=3D0x10
> bus=3D2, slot=3D9, func=3D0
> class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
> cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords)
> lattimer=3D0x20 (960 ns), mingnt=3D0x20 (8000 ns), maxlat=3D0x40 (160=
00 ns)
> intpin=3Da, irq=3D11
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[10]: type 4, range 32, base 0000c400, size 6, enabled
> pcib2: device (null) requested decoded I/O range 0xc400-0xc43f
> $PIR: 2:10 INTA routed to irq 10
> found-> vendor=3D0x1274, dev=3D0x5880, revid=3D0x04
> bus=3D2, slot=3D10, func=3D0
> class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0
> cmdreg=3D0x0005, statreg=3D0x0410, cachelnsz=3D0 (dwords)
> lattimer=3D0x20 (960 ns), mingnt=3D0x0c (3000 ns), maxlat=3D0x80 (320=
00 ns)
> intpin=3Da, irq=3D10
> powerspec 2 supports D0 D1 D2 D3 current D0
> rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc000
> pcib2: device rl0 requested decoded I/O range 0xc000-0xc0ff
> rl0: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem
> 0xe4000000-0xe40000ff irq 11 at device 9.0 on pci2
> pcib2: device rl0 requested decoded I/O range 0xc000-0xc0ff
> miibus0: <MII bus> on rl0
> rlphy0: <RealTek internal media interface> on miibus0
> rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> rl0: bpf attached
> rl0: Ethernet address: 00:20:ed:1c:da:f9
> rl0: [MPSAFE]
> pci2: <multimedia, audio> at device 10.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH2 UDMA100 controller> port
> 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
> atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000
> ata0: channel #0 on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
> atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
> ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00
> ata0-master: stat=3D0x90 err=3D0x90 lsb=3D0x90 msb=3D0x90
> ata0-master: stat=3D0x90 err=3D0x90 lsb=3D0x90 msb=3D0x90
> ata0-master: stat=3D0x90 err=3D0x90 lsb=3D0x90 msb=3D0x90
> ata0-master: stat=3D0x90 err=3D0x90 lsb=3D0x90 msb=3D0x90
> ata0-master: stat=3D0x90 err=3D0x90 lsb=3D0x90 msb=3D0x90
> ata0-master: stat=3D0x90 err=3D0x90 lsb=3D0x90 msb=3D0x90
> ata0-master: stat=3D0x90 err=3D0x90 lsb=3D0x90 msb=3D0x90
> ata0-master: stat=3D0x90 err=3D0x90 lsb=3D0x90 msb=3D0x90
> ata0-slave: stat=3D0x90 err=3D0x90 lsb=3D0x90 msb=3D0x90
> ata0: reset tp2 stat0=3D90 stat1=3D90 devices=3D0x0
> ata0: [MPSAFE]
> ata1: channel #1 on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
> atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
> ata1: reset tp1 mask=3D03 ostat0=3D00 ostat1=3D00
> ata1-master: stat=3D0x01 err=3D0x01 lsb=3D0x01 msb=3D0x01
> ata1-slave: stat=3D0x01 err=3D0x01 lsb=3D0x01 msb=3D0x01
> ata1: reset tp2 stat0=3D01 stat1=3D01 devices=3D0x0
> ata1: [MPSAFE]
> uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port
> 0xd000-0xd01f irq 5 at device 31.2 on pci0
> uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd000
> uhci0: [GIANT-LOCKED]
> usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port
> 0xd800-0xd81f irq 12 at device 31.4 on pci0
> uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800
> uhci1: [GIANT-LOCKED]
> usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> ata: ata0 already exists; skipping it
> ata: ata1 already exists; skipping it
> Trying Read_Port at 203
> Trying Read_Port at 243
> Trying Read_Port at 283
> Trying Read_Port at 2c3
> Trying Read_Port at 303
> Trying Read_Port at 343
> Trying Read_Port at 383
> Trying Read_Port at 3c3
> pnpbios: 15 devices, largest 92 bytes
> PNP0200: adding dma mask 0x10
> PNP0200: adding io range 0-0xf, size=3D0x10, align=3D0
> PNP0200: adding io range 0x81-0x83, size=3D0x3, align=3D0
> PNP0200: adding io range 0x87-0x87, size=3D0x1, align=3D0
> PNP0200: adding io range 0x89-0x8b, size=3D0x3, align=3D0
> PNP0200: adding io range 0x8f-0x91, size=3D0x3, align=3D0
> PNP0200: adding io range 0xc0-0xdf, size=3D0x20, align=3D0
> pnpbios: handle 1 device ID PNP0200 (0002d041)
> PNP0100: adding irq mask 0x1
> PNP0100: adding io range 0x40-0x43, size=3D0x4, align=3D0
> pnpbios: handle 2 device ID PNP0100 (0001d041)
> PNP0b00: adding irq mask 0x100
> PNP0b00: adding io range 0x70-0x71, size=3D0x2, align=3D0
> pnpbios: handle 3 device ID PNP0b00 (000bd041)
> PNP0303: adding irq mask 0x2
> PNP0303: adding io range 0x60-0x60, size=3D0x1, align=3D0
> PNP0303: adding io range 0x64-0x64, size=3D0x1, align=3D0
> pnpbios: handle 4 device ID PNP0303 (0303d041)
> PNP0800: adding io range 0x61-0x61, size=3D0x1, align=3D0
> pnpbios: handle 5 device ID PNP0800 (0008d041)
> PNP0c04: adding irq mask 0x2000
> PNP0c04: adding io range 0xf0-0xff, size=3D0x10, align=3D0
> pnpbios: handle 6 device ID PNP0c04 (040cd041)
> INT0800: adding fixed memory32 range 0xffb80000-0xffbfffff, size=3D0x8000=
0
> pnpbios: handle 7 device ID INT0800 (0008d425)
> PNP0c01: adding fixed memory32 range 0-0x9ffff, size=3D0xa0000
> PNP0c01: adding fixed memory32 range 0xffb00000-0xffb7ffff, size=3D0x8000=
0
> PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=3D0x1000=
00
> PNP0c01: adding fixed memory32 range 0xfec00000-0xfec0ffff, size=3D0x1000=
0
> PNP0c01: adding fixed memory32 range 0xfee00000-0xfee0ffff, size=3D0x1000=
0
> PNP0c01: adding fixed memory32 range 0x100000-0x13ffffff, size=3D0x13f000=
00
> pnpbios: handle 8 device ID PNP0c01 (010cd041)
> PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=3D0x4000
> PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=3D0x4000
> PNP0c02: adding fixed memory32 range 0xf8000-0xfbfff, size=3D0x4000
> PNP0c02: adding fixed memory32 range 0xfc000-0xfffff, size=3D0x4000
> pnpbios: handle 9 device ID PNP0c02 (020cd041)
> PNP0a03: adding io range 0x294-0x297, size=3D0x4, align=3D0
> PNP0a03: adding io range 0x4d0-0x4d1, size=3D0x2, align=3D0
> PNP0a03: adding io range 0xcf8-0xcff, size=3D0x8, align=3D0
> PNP0a03: adding io range 0x4000-0x40f7, size=3D0xf8, align=3D0
> pnpbios: handle 10 device ID PNP0a03 (030ad041)
> PNP0501: adding irq mask 0x10
> PNP0501: adding io range 0x3f8-0x3ff, size=3D0x8, align=3D0
> pnpbios: handle 12 device ID PNP0501 (0105d041)
> PNP0700: adding dma mask 0x4
> PNP0700: adding io range 0x3f0-0x3f5, size=3D0x6, align=3D0
> PNP0700: adding io range 0x3f7-0x3f7, size=3D0x1, align=3D0
> PNP0700: adding irq mask 0x40
> pnpbios: handle 13 device ID PNP0700 (0007d041)
> PNP0400: adding irq mask 0x80
> PNP0400: adding io range 0x378-0x37f, size=3D0x8, align=3D0
> PNP0400: adding io range 0x778-0x77b, size=3D0x4, align=3D0
> pnpbios: handle 14 device ID PNP0400 (0004d041)
> PNP0501: adding irq mask 0x8
> PNP0501: adding io range 0x2f8-0x2ff, size=3D0x8, align=3D0
> pnpbios: handle 16 device ID PNP0501 (0105d041)
> sc: sc0 already exists; skipping it
> vga: vga0 already exists; skipping it
> isa_probe_children: disabling PnP devices
> isa_probe_children: probing non-PnP devices
> adv0: not probed (disabled)
> aha0: not probed (disabled)
> aic0: not probed (disabled)
> atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
> atkbd0: [GIANT-LOCKED]
> psm0: current command byte:0067
> kbdc: TEST_AUX_PORT status:0000
> kbdc: RESET_AUX return code:00fe
> kbdc: RESET_AUX return code:00fe
> kbdc: RESET_AUX return code:00fe
> kbdc: DIAGNOSE status:0055
> kbdc: TEST_KBD_PORT status:0000
> psm0: failed to reset the aux device.
> bt0: not probed (disabled)
> cs0: not probed (disabled)
> ed0: not probed (disabled)
> fdc0: ic_type 90 part_id 80
> fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa=
0
> fdc0: ic_type 90 part_id 80
> fdc0: [MPSAFE]
> fdc0: [FAST]
> fe0: not probed (disabled)
> ie0: not probed (disabled)
> lnc0: not probed (disabled)
> pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
> pcic1: not probed (disabled)
> ppc0: parallel port found at 0x378
> ppc0: using extended I/O port range
> ppc0: SPP
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> ppbus0: <Parallel port bus> on ppc0
> ppbus0: IEEE1284 device found
> Probing for PnP devices on ppbus0:
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> sc0: no video adapter found.
> sc0: <System console> failed to probe on isa0
> sio0: irq maps: 0x1 0x11 0x1 0x1
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A, console
> sio1: irq maps: 0x1 0x9 0x1 0x1
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> sio2: not probed (disabled)
> sio3: not probed (disabled)
> sn0: not probed (disabled)
> vga0: <Generic ISA VGA> failed to probe on isa0
> vt0: not probed (disabled)
> isa_probe_children: probing PnP devices
> unknown: <PNP0303> can't assign resources (port)
> unknown: <PNP0303> at port 0x60 on isa0
> unknown: <PNP0800> failed to probe at port 0x61 on isa0
> unknown: <INT0800> failed to probe at iomem 0xffb80000-0xffbfffff on isa0
> unknown: <PNP0501> can't assign resources (port)
> unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
> unknown: <PNP0700> can't assign resources (port)
> unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
> unknown: <PNP0400> can't assign resources (port)
> unknown: <PNP0400> at port 0x378-0x37f on isa0
> unknown: <PNP0501> can't assign resources (port)
> unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
> Device configuration finished.
> procfs registered
> Timecounter "TSC" frequency 1700030456 Hz quality 800
> Timecounters tick every 10.000 msec
> lo0: bpf attached
> Mounting root from ufs:/dev/ad0s1a
> setrootbyname failed
> ffs_mountroot: can't find rootvp
> Root mount failed: 6
>
> Manual root filesystem specification:
> <fstype>:<device> Mount <device> using filesystem <fstype>
> eg. ufs:da0s1a
> ? List valid disk boot devices
> <empty line> Abort manual input
>
> mountroot>
>
> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> kernel config
> <<<<<<<<<<<<<<<<<<<<<<<<<<<<<
> machine i386
> cpu I686_CPU
> ident fang
>
> options SCHED_4BSD #4BSD scheduler
> options INET #InterNETworking
> options INET6 #IPv6 communications protocols
> options FFS #Berkeley Fast Filesystem
> options SOFTUPDATES #Enable FFS soft updates support
> options NFSCLIENT #Network Filesystem Client
> options NFSSERVER #Network Filesystem Server
> options MSDOSFS #MSDOS Filesystem
> options CD9660 #ISO 9660 Filesystem
> options PROCFS #Process filesystem (requires PSEUDOFS)
> options PSEUDOFS #Pseudo-filesystem framework
> options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
> options COMPAT_FREEBSD4 #Compatible with FreeBSD4
> options KTRACE #ktrace(1) support
> options SYSVSHM #SYSV-style shared memory
> options SYSVMSG #SYSV-style message queues
> options SYSVSEM #SYSV-style semaphores
> options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensi=
ons
> options KBD_INSTALL_CDEV # install a CDEV entry in /dev
>
> device isa
> device pci
>
> device fdc
>
> device ata
> device atadisk # ATA disk drives
> device atapicd # ATAPI CDROM drives
> options ATA_STATIC_ID #Static device numbering
>
> device atkbdc # AT keyboard controller
> device atkbd # AT keyboard
> device psm # PS/2 mouse
>
> device vga # VGA video card driver
>
> device sc
>
> device npx
>
> device sio # 8250, 16[45]50 based serial ports
>
> device ppc
> device ppbus # Parallel port bus (required)
> device lpt # Printer
>
> device rl # RealTek 8129/8139
> device miibus # MII bus support
>
> device random # Entropy device
> device loop # Network loopback
> device ether # Ethernet support
> device pty # Pseudo-ttys (telnet etc)
>
> #device pcm
> #device sbc
>
> device usb # USB Bus (required)
> device umass # Disks/Mass storage - Requires scbus and da
> device scbus # SCSI bus (required for SCSI)
> device da # Direct Access (disks)
> device pass # Passthrough device (direct SCSI access)
> device uhci # UHCI PCI->USB interface
> device ohci # OHCI PCI->USB interface
>
> device bpf # Berkeley packet filter
>
--=20
Doug White | FreeBSD: The Power to Serve
dwhite@gumbysoft.com | www.FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050327130409.F35584>