Date: Thu, 14 Apr 2005 20:22:17 +0200 From: Wilko Bulte <wb@freebie.xs4all.nl> To: ticso@cicely.de Cc: freebsd-alpha@freebsd.org Subject: Re: MiataGL doesn't boot in 5.4-RC2 Message-ID: <20050414182217.GA15448@freebie.xs4all.nl> In-Reply-To: <20050414180341.GA15335@freebie.xs4all.nl> References: <20050412201350.GD602@pato.euesrg02.net> <20050412205104.GE40828@cicely12.cicely.de> <20050412210655.GA5737@freebie.xs4all.nl> <20050412212717.GF40828@cicely12.cicely.de> <20050414180341.GA15335@freebie.xs4all.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Apr 14, 2005 at 08:03:41PM +0200, Wilko Bulte wrote.. > On Tue, Apr 12, 2005 at 11:27:18PM +0200, Bernd Walter wrote.. > > On Tue, Apr 12, 2005 at 11:06:55PM +0200, Wilko Bulte wrote: > > > On Tue, Apr 12, 2005 at 10:51:05PM +0200, Bernd Walter wrote.. > > > > On Tue, Apr 12, 2005 at 10:13:50PM +0200, Victor Balada Diaz wrote: > > > > > When i try to boot the bootonly cd of FreeBSD 5.4-RC2 it hangs forever after > > > > > probing the isp(4) card. > > > > > > > > > > >>>show conf > > > > > > > > > > > > > > > Bus 00 Slot 20: DECchip 21152 PCI to PCI Bridge > > > > > Bus 01 Slot 04: ISP1040 Scsi Controller > > > > > pkc0.7.0.1004.0 SCSI Bus ID 7 > > > > > dkc0.0.0.1004.0 RZ2CC-KB > > > > > dkc100.1.0.1004.0 SEAGATE ST39175LW > > > > > > > > Put the isp card into a 64 bit slot. > > > > > > Miata GL has onboard isp(4) SCSI. Miata MX5 does not. > > > > Ah - mixed those up. > > > > > That said, any relation that you can think of with interrupt routing? > > > > No - there is a problem on MX5, but in this case the bridge setup > > looks correct. > > If there are problems with int routing then they should be limited > > to add-on hardware, not standard. > > Hmm. > > > All I know about is that there are problems with the cypress > > controller, which very likely still exists. > > > > > > Would be interesting to see what happens with your IDE controller. > > > > > > Yup... > > > > Are there any other models with Cypress chips? > > I think most in that time range had CMD646 ones. > > Yup: my 164SX has: > > PCI Bus > Bus 00 Slot 05: Intel 8255x Ethernet > eia0.0.0.5.0 00-D0-B7-55-5F-AE > > Bus 00 Slot 07: 164514E4/007C0E11 > > > Bus 00 Slot 08/0: Cypress 82C693 > Bridge to Bus 1, And that boots fine. But I noticed something else in the system of the original poster: a TGA2 display card. Any chance you can give it a try without that one please? There has been some fun with the various TGA display adapters in the past. Wilko -- Wilko Bulte wilko@FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050414182217.GA15448>