Date: Tue, 17 May 2005 11:25:56 +0200 (CEST) From: Jens Andre Griepentrog <griepent@wias-berlin.de> To: freebsd-mobile@freebsd.org Subject: Broken support for 3Com 3c575C Fast Etherlink XL? Message-ID: <20050517.112556.2004066187.griepent@wias-berlin.de>
next in thread | raw e-mail | index | archive | help
Hello,
I have upgraded my Compaq Armada 1750 notebook to FreeBSD 5.4-RELEASE.
In contrast to the old 5.1-RELEASE, now the support for my 3Com 3c575C
Fast Etherlink XL cardbus network device seems to be broken.
It will not be initialized as you can see in the dmesg output below:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005
root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (365.86-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 201293824 (191 MB)
avail memory = 187318272 (178 MB)
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0x50000000-0x53ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x2020-0x202f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x2000-0x201f irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge> at device 7.3 (no driver attached)
cbb0: <TI1225 PCI-CardBus Bridge> mem 0x7fffe000-0x7fffefff irq 11 at device 17.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1225 PCI-CardBus Bridge> mem 0x7ffff000-0x7fffffff irq 11 at device 17.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0511> can't assign resources (irq)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0c02> can't assign resources (port)
Timecounter "TSC" frequency 365861022 Hz quality 800
Timecounters tick every 10.000 msec
cardbus0: Resource not specified in CIS: id=14, size=80
cardbus0: Resource not specified in CIS: id=18, size=80
xl0: <3Com 3c575C Fast Etherlink XL> port 0x1100-0x117f mem 0x88000000-0x8800007f,0x88000080-0x880000ff irq 11 at device 0.0 on cardbus0
xl0: reset didn't complete
xl0: command never completed!
xl0: command never completed!
xl0: eeprom failed to come ready
xl0: failed to read station address
device_attach: xl0 attach returned 6
ad0: 6194MB <TOSHIBA MK6411MAT/J0.05 B> [13424/15/63] at ata0-master UDMA33
acd0: CDROM <TOSHIBA CD-ROM XM-1902B/1218> at ata0-slave PIO4
ad2: 9590MB <HITACHI DK23CA-10/00H5A0A3> [19485/16/63] at ata1-master UDMA33
pccard1: Allocation failed for cfe 32
sio4: <INTEL CORP V92 MODEM AT-MD56XX> at port 0x2f8-0x2ff irq 11 function 0 config 33 on pccard1
sio4: type 16550A
sio4: unable to activate interrupt in fast mode - using normal mode
Mounting root from ufs:/dev/ad0s1a
Is there any chance to get it work or shall I downgrade to 5.1-RELEASE
which has been running flawlessly until now?
Many thanks for your effort,
Jens A. Griepentrog
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050517.112556.2004066187.griepent>